A Comparison of Enzymatic and Lime Treatments for Extraction of Alcohol Soluble Solids from Citrus Peel

Digestion of citrus wastes by pectolytic and cellulolytic enzymes was compared to the currently employed lime method of solubilizing solids from citrus peel. Maximal soluble solids removed from the pressed peel occurred after 6 hr incubation at 45°C with a pectinase concentration of 1.0 PGu/g peel mixture. Decreasing the particle size of the peel caused a 4 - 10% increase in solids removal after enzyme treatment. Addition of cellulase enzyme (20 CEu/g peel mixture) to pectinase enzyme (1.0 PGu/g peel mixture) removed an additional 15% soluble solids from peel. Glucose, fructose, arabinose, and xylose were the major sugars extracted from enzymetreated peel, while sucrose was the major sugar in lime-treated peel samples. Organic acids (citric, malic, and quinic) were present at higher concentrations in lime-treated peel extracts than in enzymetreated peel extracts.     

A derivation of the diffuse fraction's dependence on the clearness index

When averaged over many events having the same k_t, the average diffuse fraction carries an important quasi-universal functional dependence on the clearness index k_t. This paper presents a theoretical derivation of k(k_t). The atmosphere is modeled as having two homogeneous, nonselectively absorbing layers: an upper layer (roughly, the ozonosphere) with zero scattering and beam transmittance τ_u, and a lower layer with isotropic, nonselective scattering characterized by an albedo ω_l. After an analysis which traces generations of scattered photons, this model predicts a function which, upon adjusting ω_l and τ_u, fits the measured data closely.     

Using precise data sets on farming and pesticide properties to verify a diffuse pollution hydrological model for predicting pesticide concentration.

Verification of a diffuse pollution model involves comparing results actually observed with those predicted by precise model inputs. Acquisition of precise model inputs is, however, problematic. In particular, when the target catchment is large and substantial estimation uncertainty exists, not only model verification but also prediction is difficult. Therefore, in this study, rice-farming data were collected for all paddy fields from all farmers in a catchment and pesticide adsorption and degradation rates in paddy field soil samples were measured to obtain precise model inputs. The model inputs successfully verified the model's capability to predict pesticide concentrations in river water. Sensitivity analyses of the model inputs elucidated the processes significantly affecting pesticide runoff from rice farms. Pesticide adsorption and degradation rates of the soil did not significantly affect pesticide concentrations, although pesticide discharge to river water accounted for less than 50% of the total quantity of pesticide applied to fields, possibly owing to pesticide adsorption and degradation. The timing of increases in pesticide concentrations in river water was affected mostly by the farming schedule, including the time of pesticide application and irrigation, and secondarily by rainfall events.     

Zinc and Phytate Distribution in Peas. Influence of Heat Treatment, Germination, pH, Substrate, and Phosphorus on Pea Phytate and Phytase

The largest proportions of zinc and phytate, 88.7 and 97.1%, respectively, were in the Garfield pea cotyledon; the greatest concentrations were in the germ. Cooking peas by two different methods resulted in 13% phytate reduction. Peas incubated 6.5 hr from 25 to 80°C yielded maximum phytate loss (25%) at 60°C due to phytase activated hydrolysis. Germination (10 d) decreased pea phytate 75% and increased phytase activity 12-fold. Semi-purified germinated pea phytase showed temperature optimum at 45°C, pH optimum of 5.2, 30% inhibition by 1 mM inorganic P, and substrate preference for pyrophosphate. Incubation of early germinated peas at optima pH and temperature is suggested for maximum phytate reduction.     

Automated fluorimetry in quality control of pasteurized and ultra-high temperature-treated starch soup

Automated monitoring of the microbiological quality of heat-processed foods by the resazurin reduction test was applied to microtitration plate incubator-fluorimeter technology. The appearance and disappearance of the fluorescing peak of resorufin was monitored on microtitration trays. Pasteurized or ultra-high temperature-treated starch-based soup was used as the model food system. Bacillus subtilis spores (ultra-high temperature treatment) and vegetative cells of Enterococcus faecalis (pasteurization) were inoculated into the soup before the heat treatment at levels which resulted in some survival. The timing of appearance of maximum fluorescence correlated with the number of bacteria in pre-incubated samples. Automated resazurin-reduction fluorimetry was compared with conventional plating, turbidometry and microcolony count by the direct epifluorescent filter technique. The results of the resazurin test correlated well with those of all the other methods tested. Fluorimetry had the advantage that the results could be read within 1–5h and the reproducibility was superior to the other methods.     

Wastewater treatment in tsunami affected areas of Thailand by constructed wetlands.

The tsunami of December 2004 destroyed infrastructure in many coastal areas in South-East Asia. In January 2005, the Danish Government gave a tsunami relief grant to Thailand to re-establish the wastewater management services in some of the areas affected by the tsunami. This paper describes the systems which have been built at three locations: (a) Baan Pru Teau: A newly-built township for tsunami victims which was constructed with the contribution of the Thai Red Cross. Conventional septic tanks were installed for the treatment of blackwater from each household and its effluent and grey water (40 m3/day) are collected and treated at a 220 m2 subsurface flow constructed wetland. (b) Koh Phi Phi Don island: A wastewater collection system for the main business and hotel area of the island, a pumping station and a pressure pipe to the treatment facility, a multi-stage constructed wetland system and a system for reuse of treated wastewater. The constructed wetland system (capacity 400 m3/day) consists of vertical flow, horizontal subsurface flow, free water surface flow and pond units. Because the treatment plant is surrounded by resorts, restaurants and shops, the constructed wetland systems are designed with terrains as scenic landscaping. (c) Patong: A 5,000 m2 constructed wetland system has been established to treat polluted water from drainage canals which collect overflow from septic tanks and grey water from residential areas. It is envisaged that these three systems will serve as prototype demonstration systems for appropriate wastewater management in Thailand and other tropical countries.     

High-speed and large noise margin tolerance E/D logic gates withLDD structure DMTs fabricated using selective RIE technology

The authors describe a novel design concept for enhancement (E) and depletion (D) mode FET formation using i-AlGaAs/n-GaAs doped-channel hetero-MISFET (DMT) and a novel self-aligned gate process technology for submicrometer-gate DMT-LSIs based on E/D logic gates. 0.5-μm gate E-DMTs (D-DMTs) with a lightly doped drain (LDD) structure show an average V_t of 0.18 (-0.46) V, a V_t standard deviation of 22.6 (24.9) mV, and a maximum transconductance of 450 (300) mS/mm. The V_t shift is less than 50 mV with a decrease in gate length down to 0.5 μm. The gate forward turn-on voltage V_f is more than 0.9 V, i.e. about 1.6 times that for MESFETs. This superiority in V _f, preserved in the high-temperature range, leads to an improvement in noise margin tolerance by a factor of three. In addition, 31-stage ring oscillators operate with a power consumption of 20 (1.0) mW/gate and a propagation delay of 4.8 (14.5) ps/gate. Circuit simulation based on the experimental data predicts 140 ps/gate and 1 mW/gate for DMT direct-coupled FET logic circuits under standard loading conditions. DMTs and the technology developed here are very attractive for realizing low-power and/or high speed LSIs