Comparative study of behavior of inhaled samarium and cerium in mice

Distribution of Sm and Ce in mice was investigated after inhalation exposure to their oxide particles of 5 μm diameter and 15 mg/m3.Sm and Ce were mainly distributed in lung,their concentrations decreased with passing time,and their concentrations in lung were correlated with exposure periods.Concentrations of Ce were lower than that of Sm in each point.Sm was also distributed in the other organs and bone but Ce was scarcely detected.These results suggest that the behaviors of Sm and Ce inhaled were different,although their chemical properties are similar.     

Influence of casting surfaces on fatigue strength of ductile cast iron

Quantitatively evaluating the fatigue strength of ductile iron (DI) with casting surfaces involves several complicated factors such as surface roughness, transition of microstructures from surface to interior, several types of defects and residual stresses. Tension–compression fatigue tests have been performed using DI having casting surfaces composed of a ferritic structure, a ferrite‐pearlitic structure and a pearlitic structure. Residual stresses were relieved by annealing in order to separately evaluate each factor. The parameter model was applied for quantitative evaluation of fatigue strength. Surface roughness was considered to be mechanically equivalent to a defect, and the effective defect size due to the interaction between the surface roughness and a defect was defined. The present study proposes a method of evaluating the maximum defect size using statistics of extremes and the lower bound of the scatter of fatigue strength, for practical design.     

Co-Al基三元系中B2相的溶解度间隙与稳定性

Information on phase equilibria in the Co-Al based systems which are related to some magnetic and heat resistance materials is important for their microstructural control. Recently, it was proposed with a theoretical calculation on electronic band structure that some Heusler-type alloys Co2 XAl (X: Cr and Mn) should be a new type of spinelectronic materials so-called half-metallic ferromagnet. In the case of the Co2CrAl, however, magnetic properties expected from the theoretical work can not been experimentally obtained and the reason has been still unknown. On the other hand, a tunne- ling magnetoresistance (TMR) effect due to the half-metallic properties was reported in Co2 (Cr0.6 Fe0.4 ) Al alloy, but not the Co2CrAl alloy. In the present paper, it is reported that this discrepancy with the theoretical work in the Co2CrAl alloy is bought about by phase separation between A2 and B2 phases, and that the substitution of Fe for Cr can suppress the precipitation of A2 phase in the B2 phase. Such a phase separation is originally due to the miscibility gap between CoAl and Cr formed in the Co-Al-Cr ternary system as well as that reported by Hao et al. in the Ni-Co-Al-Fe system.     

Electrodeposition behaviour of zinc-iron group metal alloys from a methanol bath

Electrodeposition of zinc–iron-group metal alloys is carried out in a methanol bath. The effects of different parameters, such as bath composition and current density on current efficiency and alloy composition are investigated. Partial polarization curves of zinc and nickel are measured for both alloy and single metal deposition to evaluate the codeposition behaviour of zinc–iron-group metal alloys. Attempts are also made to confirm the proposed hydroxide suppression mechanism explaining the anomalous type of codeposition of zinc–iron-group metal alloys by investigating the role of water in the electroreduction process of zinc and iron-group metal ions.     

IMPROVEMENT IN TENSILE PROPERTIES OF α+β TYPE Ti ALLOYS BY HYDROGEN TREATMENT

提出了一种新的细化α+β型钛合金显微组织的氢处理工艺:在合金的氢化β转变点以下0—40K的温度范围对合金渗氢处理,空冷至室温,最后在948K真空除氢。Ti-6Al-4V和Ti-5Al-2.5Fe合金经此工艺处理后,组织显著细化,屈服强度,拉伸强度及延伸率分别提高8—15％,5—13％,7—14％。     

EXTRACTION OF PALLADIUM(II) AND PLATINUM(IV) AS CHLOROCOMPLEX ACIDS INTO BASIC ORGANIC SOLVENTS

Solvent extraction of platinum(IV) and palladium(II) with tri-n-octylamine(TOA) in o-xylene from 4.0M (Na,H)(Cl, HSO₄) has been investigated at 298K in order to compare with similar extraction by trioctylphosphine oxide(TOPO). The dependence of the distribution ratio of platinum(IV) and pal 1adium(II) on TOA, hydrogen ion and chloride ion concentrations suggests the dominant extracted species of these metals would be 2:1 for proto-nated amine : chlorocomplex anion and the extraction should be essentially anion exchange reaction. The extraction constants (Kex = D[H⁺(T0A)C1 ] ²[C1 ]²), were evaluated as 10^6-3 and 10^5.8 for platinum(IV) and pal ladium(II), respectively. The anion exchange with protonated TOPO salt represented by H(T0P0)₂ ⁺C1  is less than that with protonated TOA salt by a factor of one order.     

3D晶体取向测试技术在铝合金晶粒变形分析中的应用

非均匀变形在材料工程领域是一个有趣的问题。同步辐射成像技术通过跟踪多晶体铝合金的显微组织的特性,提供了局部应变的3D分布图。为了更加深入地分析非均匀的过程,开发了三维X射线衍射分析技术。它利用跟踪晶界获得的信息（GBT）,描述了三维空间中新的晶体取向测试技术。     

ELECTROMYOGRAPHIC STUDY OF MASTICATION OF KELP SNACK

Electromyograms (EMGs) of mastication of kelp snack were compared with the physical properties measured by a tensile test and sensory assessment. The number of chewing strokes, masticatory time, total muscle activities and total duration for whole mastication agreed with the breaking force in the tensile test and with sensory difficulty of mastication. Amplitude, EMG activity, and duration per chew also showed the same tendency. In the masticatory cycle, significant differences among the samples were not observed. As mastication proceeded, the amplitude and EMG activity decreased, and the EMG-duration shortened. The EMG activity, amplitude, and masticatory rhythm changed significantly, and sample differences decreased from the middle to the late stage of mastication. Just before swallowing, the chewing cycle was lengthened, and no significant difference was observed among samples at the last chew.     

An autonomous decentralized scheduling algorithm for a scheduling problem in a metal mould assembly process

This paper deals with a scheduling problem in a metal mould assembly process. The process is of job shop type with several additional constraints. One constraint is that precedence relations exist not only among operations but also among jobs. The other constraint is that the system has two types of machines in parallel. The single-function machine executes a specific operation of each job and the multi-function machine can execute several operations. Therefore selection of the machine is necessary for executing each operation. In addition the problem has two objective functions. One is to minimize the sum of the tardiness of each job, and the other is to maximize the working time of the multi-function machine because of reducing the operating cost of machines. An autonomous decentralized scheduling algorithm is proposed to obatin a compromise solution of the multi-objective problem. In this algorithm, a number of decision makers are called subsystems, which co-operate with one another in order to attain the goal of the overall system. In our algorithm, all jobs and the set of multi-function machine are defined as the subsystem because their objective functions are competitive. They determine the scheduling plan on the basis of their co-operation and the satisfaction of their own objective function levels. The effectiveness of the algorithm is investigated by examining numerical results.     

Scanning electron microscopic structure of the prismatic layer in the Bivalvia

The shell structure of the Bivalvia has been observed with the use of optical and electron microscopes since the early 1900’s. The prismatic structure is one of the more attractive shell structures in bivalved mollusks. This structure is composed of the aggregation of polygonal prisms arranged densely. Each prism is made of small calcite crystallites arranged perpendicular to a growth shell surface. Organic materials, named organic sheaths, accumulate around prisms and stain well with heamatoxylin-eosin.The Bivalvia, which make prismatic structures, are divided into two groups. One group has the inner shell layer made up of a nacreous structure, and the other has the inner shell layer made up of a foliated structure. The aragonite prismatic layer and the prismatic layer are closely related to each other, as is the aragonite prismatic layer to the composite prismatic one.