Corner forming of AZ61A magnesium alloy tube within warm hydroforming

The corners with small radii on cross sections are crucial for forming hydroformed components with polygonal sections.In this paper,warm hydroforming experiments of AZ61A magnesium alloy tubes were carried out to study the forming regularity of round corners by using a demonstration part with square sections.Effects of temperature on radius forming,thinning ratio distribution and microstructure were revealed and a component with relative outer corner radius of 3.0 was obtained by warm hydroforming at 240℃.The minimum thickness of the formed square section was located in the transition position between the corner and the straight wall.The thinning ratio of the round corner increased with the increase of forming temperature.Formability of the magnesium tube was improved by raising temperature under the effect of dynamic recrystallization at 240℃.     

pH值对城市生活污水短程硝化的影响

为实现废水处理过程中的短程硝化及反硝化脱氮中亚硝酸盐的积累以控制硝化反应的类型,以试验的方式,采用SBR工艺研究了pH值对不含海水的城市生活污水和含30%海水的城市生活污水短程硝化的影响.试验结果表明:对于不含海水的城市生活污水,单纯提高pH值来提高游离氨浓度并不一定能够实现短程硝化;对于含30%海水的城市生活污水,可直接实现短程硝化;海水盐度是实现短程硝化的影响因素之一.     

商务智能系统中两种改进的关联规则挖掘算法

根据日常商务数据的特点,提出了商业应用系统中进行数据挖掘的改进的Apriori算法和对点击流数据进行挖掘的改进的多支持度关联规则算法,并结合具体实例进行了分析.分析结果表明,2种改进的算法可以有效地提高系统数据挖掘的效率.     

湖北黄麦岭沉积变质磷灰岩选矿技术研究

黄麦岭磷矿属较易选的低品位沉积变质磷灰岩矿,通过扩能改造、回水利用等措施,不仅提高了资源的综合利用率,也为公司每年降低生产成本4 000多万元,创造了可观的经济效益.     

基于模糊神经网络的大场景人群密度估计方法 *

提出了一种估计大场景下密集人群密度的方法。该方法根据人类视觉的模糊性原理,认为用模糊集来划分人群密度范围比用确定的方法更符合人眼视知觉的认知方式,利用统计的方法确定灰度共生矩阵各指标对于各个密度类别的隶属函数;设计基于误差反向传播训练算法（BP）的模糊神经网络,计算样本模式对于各个密度类别的隶属度,并根据人群密度变化的时域连续性原理对人群密度范围进行合理估计。实验表明该方法提高了估计精度。     

基于视频帧的彩色水印嵌入算法研究

为了增强水印的内容认证性,提出了视频帧中嵌入彩色水印的算法.先分别选取I帧的单色通道做DCT变换,分块后提取奇异值,将彩色水印的对应通道层做DWT变换,对低频区域置乱后提取奇异值,再将水印奇异值嵌入到载体奇异值中,然后由三色通道合成水印视频图像.最后进行了攻击实验,实验结果表明,该算法具有较好的水印提取能力和一定的鲁棒性.     

Model of cold crystallization of uniaxially oriented poly(ethylene terephthalate) fibers

The differential scanning calorimeter heating curves of uniaxially oriented poly(ethylene terephthalate) (PET) fibers with three peaks were analyzed by using a newly proposed equation. The diffusion-controlled crystallization theory is suitable for describing cold crystallization of uniaxially oriented PET fibers. A crystallization model was proposed based on the kinetic parameters obtained. The model embraces the three sub-processes of crystallization corresponding to different growth geometries. The first sub-process corresponds to the nucleation of ordered molecular segments or the radial growth of preformed nucleus, resulting in the shorter bundle-like entities. The second sub-process corresponds to further growth of the bundle-like crystallites along chain direction, resulting in the longer bundle-like entities. The third sub-process corresponds to the three-dimensional growth of crystallites relating to the random segments, resulting in the spherical entities.     

Characterization of konjac glucomannan–quaternized poly(4‐vinyl‐N‐butyl) pyridine blend films and their preservation effect

Novel polymer blends were prepared from a mixture of 2 wt % konjac glucomannan and 4 wt % quaternized poly(4‐vinyl‐N‐butyl) pyridine (QPVP) in aqueous solution and dried at room temperature for 72 h. Their structure and properties were studied by infrared, wide‐angle X‐ray diffraction, scanning electron microscopy, thermogravimetric analysis, and differential scanning calorimetry. Thermal stability in the dry state was reduced with increasing content of QPVP. Compared with QPVP film, the tensile strength of the films was improved in the dry state. The maximum value of 12.74% tensile break elongation was reached when the content of QPVP was 30%. Structural analysis indicated that clear phase separation was observed when the content of QPVP was only 50%. Results from the filmcoating preservation experiments with lychee showed that this blend film had water‐holding ability. The fruit weight loss rate and rot rate both decreased in various degrees. The potential uses of these novel polymer films could be as preservative films. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1868–1875, 2004     

XRQ-Ⅱ型开车燃烧控制系统的结构及应用

XRQ-Ⅱ型开车燃烧控制系统由泵组、阀组、燃烧器、快速关断阀门及控制柜等组成,燃料经油枪喷嘴雾化喷出在燃烧器中安全稳定地燃烧,控制柜保证供油及点火、火焰检测.在600 kt/a硫磺制酸系统焚硫炉烘炉及催化剂升温中的实际应用表明,XRQ-Ⅱ型开车燃烧控制系统具有便于自控操作、提高焚硫炉烘炉内衬质量、缩短催化剂升温时间等优点.     

气升式内环流反应器中油滴的分散特性

本文研究了气升式内环流反应器中油滴的分散特性。以对数正态分布密度函数为油滴尺寸的分散模型,导出了油滴的Sauter平均直径解析式。对模型作了实验验证,关联了模型参数。提出了油滴的尺寸分布密度函数和Sauter平均直径的半经验式。结果表明计算值与实验值吻合良好。