松辽盆地南部岩性圈闭识别技术及效果

寻找隐蔽油气藏一直是油气勘探中的难题,我国东部吉林油田的中浅层已进入高成熟勘探阶段,油气勘探已由早期的构造圈闭勘探转变为现今的以隐蔽圈闭勘探为主的阶段。本文针对松辽盆地南部的西部前缘带三维连片工区及伊通地堑岔路河断陷,综合应用构造精细解释、声波曲线重构波阻抗反演、层序地层学、地震相及沉积(微)相分析、模型正演、地震属性分析、频谱分解及三维可视化等技术手段,所提供的多口探井获得工业油气流或有良好的油气显示,取得了较好的解释效果。     

板栅模具设计中的几个问题

通过对板栅模具设计中遇到的几个实际问题的分析提出处理意见 ,从而达到科学合理地设计板栅模具。     

Effect of surfactants and liquid hydrocarbons on gas hydrate formation rate and storage capacity

Hydrate formation rate plays an important role in making hydrates for the storage and transport of natural gas. Micellar surfactant solutions were found to increase gas hydrate formation rate and storage capacity. With the presence of surfactant, hydrate could form quickly in a quiescent system and the energy costs of hydrate formation reduced. Surfactants (an anionic surfactant, a non‐ionic surfactant and their mixtures) and liquid hydrocarbons (cyclopentane and methylcyclohexane) were used to improve hydrate formation. The experiments of hydrate formation were carried out in the pressure range 3.69–6.82 MPa and the temperature range 274.05–277.55 K. The experimental pressures were kept constant during hydrate formation in each experimental run. The effect of anionic surfactant (sodium dodecyl sulphate (SDS)) on natural gas storage in hydrates is more pronounced compared to a non‐ionic surfactant (dodecyl polysaccharide glycoside (DPG)). The induction time of hydrate formation was reduced with the presence of cyclopentane (CP). Cyclopentane and methylcyclohexane (MCH) could increase hydrate formation rate, but reduced hydrate storage capacity The higher methylcyclohexane concentration, the lower the hydrate storage capacity. Copyright © 2003 John Wiley & Sons, Ltd.     

甘油三乙酸酯超临界酯交换反应及其动力学研究

研究了在超临界条件下甘油三乙酸酯与甲醇或乙醇的酯交换反应,分别考察了超临界状态下醇油摩尔比和温度对反应的影响。实验结果表明,甲醇或乙醇与甘油三乙酸酯的摩尔比为14、反应温度为350℃、反应时间为20m in时,乙酸甲酯或乙酸乙酯的收率分别达100%和60%。对超临界状态下动力学的研究结果表明,甘油三乙酸酯与甲醇或乙醇的酯交换反应为拟一级反应,在相同的反应条件下,采用甲醇时酯交换反应速率比用乙醇时快,相应的甘油三乙酸酯的转化率也高;甘油三乙酸酯在超临界甲醇或乙醇中酯交换反应的表观活化能分别为58.7 kJ/mol和75.1 kJ/mol,甘油三乙酸酯与甲醇酯交换反应的活化能低于与乙醇酯交换反应的活化能,表明碳链短的醇更易进行酯交换反应。     

数控超声加工的初步工艺试验

介绍在经过数控化改造的两坐标超声加工机床上所进行数控超声加工的初步工艺试验,并讨论试验结果。     

A Study on NMR and GC/MS Spectra of the Isomers of Linear Hexyl Naphthalene

The GC/MS and NMR analysis of the reaction products of naphthalene with 1-bromohexane were reported. The products obtained were suggested to have six isomers of linear hexylnaphthalene and the structure of each isomer was determined by GC/MS and NMR spectra. For the first time, the unique chemical shift data were obtained. The content of each isomer calculated by ¹H NMR and ¹³C NMR spectra was consistent with that by GC/MS spectra, which confirmed the accuracy of NMR data.     

线性调制抗噪声性能的提高方法

本文主要是在线性解调系统中,利用信道中加性高斯白噪声正交分量(nc与Ns)两者正交性与其中之一(ns)经相移之后形成线性相关性使噪声本身消除噪声,以达到提高信噪比的目的,从而提高抗噪声性能.     

Studies of the influence of alloying elements on the growth of ferrite from austenite under decarburization conditions: Fe-C-Nl alloys

We have evaluated controlled decarburization as a method for probing the effect of alloying elements on ferrite growth from austenite. The technique permits the exploration of longer-time ferrite layer growth; it minimizes the effects of interface structure on ferrite growth; and it permits the isolation of the effects of temperature and alloying element concentration on ferrite/austenite interface motion. The study of the decarburization of initially homogeneous Fe-C-Ni alloys was complemented by experiments using specimens with a controlled nickel concentration gradient. Although the decarburization method yields consistent results at longer times, it is found to be less appropriate for the study of initial ferrite growth. Nucleation in the gas/solid interface region, coupled with uncertainties about the precise time of decarburization, leads to large relative errors at the earliest times. For these reasons, the method is considered a valuable complement to studies based on precipitation boundary conditions. This article is based on a presentation given in the symposium “The Effects of Alloying Elements on the Gamma to Alpha Transformation in Steels,” October 6, 2002, at the TMS Fall Meeting in Columbus, Ohio, under the auspices of the McMaster Centre for Steel Research and the TMS-ASM Phase Transformations Committee.     

分置式牛津型斯特林制冷机的数值分析与实验验证

对分置式牛津型斯特林制冷机进行了数值计算 ,介绍了计算模型考虑到的众多不可逆因素。通过对计算结果与实验结果的对比 ,验证了本文数值计算的准确性 ,说明本文计算模型与数值处理方法是切实可行的