Co-Evaporated MAPbI3 with Graded Fermi Levels Enables Highly Performing,Scalable, and Flexible p-i-n Perovskite Solar Cells

Recent progress of vapor-deposited perovskite solar cells (PSCs) has proved the feasibility of this deposition method in achieving promising photovoltaic devices. For the first time, it is probed the versatility of the co-evaporation process in creating perovskite layers customizable for different device architectures. A gradient of composition is created within the perovskite films by tuning the background chamber pressure during the growth process. This method leads to co-evaporated MAPbI₃ film with graded Fermi levels across the thickness. Here it is proved that this growth process is beneficial for p-i-n PSCs as it can guarantee a favorable energy alignment at the charge selective interfaces. Co-evaporated p-i-n PSCs, with different hole transporting layers, consistently achieve power conversion efficiency (PCE) over 20% with a champion value of 20.6%, one of the highest reported to date. The scaled-up p-i-n PSCs, with active areas of 1 and 1.96 cm², achieved the record PCEs of 19.1% and 17.2%, respectively, while the flexible PSCs reached a PCE of 19.3%. Unencapsulated PSCs demonstrate remarkable long-term stability, retaining ≈90% of their initial PCE when stored in ambient for 1000 h. These PSCs also preserve over 80% of their initial PCE after 500 h of thermal aging at 85 °C.     

Diphenylamine‐Substituted Carbazole‐Based Hole Transporting Materials for Perovskite Solar Cells: Influence of Isomeric Derivatives

A series of new branched hole transporting materials (HTMs) containing two diphenylamine‐substituted carbazole fragments linked by a nonconjugated methylenebenzene unit is synthesized and tested in perovskite solar cells. Synthesis of the investigated materials is performed by a simple two‐step synthetic procedure providing a target product in high yield. The isolated materials demonstrate good thermal stability and majority of the investigated compounds exist in an amorphous state, which is advantageous as there is no risk of crystallization directly in the film. The highest charge drift mobility of µ₀ = 4 × 10^?4 cm² V^?1 s^?1, measured at weak electric fields, is by ca. one order of magnitude higher than that of Spiro‐OMeTAD under identical conditions. From the perovskite solar cell testing results, it can be seen that performance of two new HTMs ( V885 and V911 ) is on a par with Spiro‐OMeTAD. Due to the ease of synthesis, good thermal, optical and photophysical properties, this type of molecules hold great promise for practical application in commercial perovskite solar cells.     

Part 1: A study on the properties of synthetic hydroxyledgrewite

In this work, for the first time chemical and physical properties of hydroxyledgrewite synthesized under hydrothermal conditions were examined. Hydroxyledgrewite was synthesized in the primary mixture consisted of CaO and amorphous SiO₂·nH₂O, when the molar ratio of CaO/SiO₂ was equal to 2.25. The synthesis has been carried out in unstirred suspensions under saturated steam pressure at 200°C temperature for 48 hours. It was proved that synthetic hydroxyledgrewite is stable till 675°C and at higher temperature recrystallized to γ‐C₂S, ‐C₂S, while upon subsequent cooling transformed into β‐C₂S. In addition to this, it was also determined that the density and specific heat capacity at 25°C are equal to 2.668 ± 5 g/cm³ and 0.928 J/(g·K), respectively. Synthetic hydroxyledgrewite showed disordered aggregates of plate‐like particles, while calculated S_BET value is equal to 13.961 m²/g. According gas adsorption results, it was obtained that hydroxyledgrewite is a mesoporous material. Also, it was obtained that after 72 hours of activated hydroxyledgrewite hydration, the amount of released heat was equal to 74.34 J/g. The product of synthesis and calcination were characterized by XRD, STA, DSC, SEM, TEM, FT‐IR analyses, and BET method.     

PAHs in Indoor and Outdoor Air from Decentralized Heating Energy Production: Comparison of Active and Passive Sampling

Spatial and temporal variation of vapor- and particle-phase polycyclic aromatic hydrocarbons (PAHs) was determined in six urban and sub-urban locations in Kaunas, Lithuania during heating and non heating seasons. Two different sampling methodologies were used: passive (based on semipermeable membrane device, SPMD) and active (based on collection on filter and sorption). Sixteen priority PAHs as well as methylated PAHs were quantified in the collected samples. The sampled total amount of 16 PAHs investigated in SPMDs ranged from 10–138 ng/day outdoors, from 5–59 ng/day indoors during the winter sampling campaign. In summer these amounts varied from 11–19 ng/day outdoors and from 19–27 ng/day indoors. The total concentrations of vapor and particle-phase PAH in winter in actively taken samples varied from 49–286 ng/m³ outdoors and from 28–83 ng/m³ indoors. Seasonal differences as well as the influence of the fuel burning for domestic heating purposes on the PAH concentration outdoors were well reflected by the data obtained using the SPMD methodology.     

A novel enzymatic method for the measurement of lactose in lactose-free products

The cover image is based on the Research Article A novel enzymatic method for the measurement of lactose in lactose-free products by David Mangan et al., DOI: 10.1002/jsfa.9317 . This cover was supported by Megazyme.

     

Cardiomyogenic Differentiation Potential of Human Dilated Myocardium-Derived Mesenchymal Stem/Stromal Cells: The Impact of HDAC Inhibitor SAHA and Biomimetic Matrices

Dilated cardiomyopathy (DCM) is the most common type of nonischemic cardiomyopathy characterized by left ventricular or biventricular dilation and impaired contraction leading to heart failure and even patients’ death. Therefore, it is important to search for new cardiac tissue regenerating tools. Human mesenchymal stem/stromal cells (hmMSCs) were isolated from post-surgery healthy and DCM myocardial biopsies and their differentiation to the cardiomyogenic direction has been investigated in vitro. Dilated hmMSCs were slightly bigger in size, grew slower, but had almost the same levels of MSC-typical surface markers as healthy hmMSCs. Histone deacetylase (HDAC) activity in dilated hmMSCs was 1.5-fold higher than in healthy ones, which was suppressed by class I and II HDAC inhibitor suberoylanilide hydroxamic acid (SAHA) showing activation of cardiomyogenic differentiation-related genes alpha-cardiac actin (ACTC1) and cardiac troponin T (TNNT2). Both types of hmMSCs cultivated on collagen I hydrogels with hyaluronic acid (HA) or 2-methacryloyloxyethyl phosphorylcholine (MPC) and exposed to SAHA significantly downregulated focal adhesion kinase (PTK2) and activated ACTC1 and TNNT2. Longitudinal cultivation of dilated hmMSC also upregulated alpha-cardiac actin. Thus, HDAC inhibitor SAHA, in combination with collagen I-based hydrogels, can tilt the dilated myocardium hmMSC toward cardiomyogenic direction in vitro with further possible therapeutic application in vivo.