Design,Synthesis, and Evaluation of ω‐(Isothiocyanato)alkylphosphinates and Phosphine Oxides as Antiproliferative Agents

A series of 21 novel, structurally diverse ω‐(isothiocyanato)alkylphosphinates and phosphine oxides (ITCs) were designed and synthesized in moderate to good yields. The synthesized compounds were evaluated for in vitro antiproliferative activity using LoVo and LoVo/DX cancer cell lines. The biological activity of the synthesized compounds was higher than that of natural isothiocyanates such as benzyl isothiocyanate or sulforaphane. The antiproliferative activity of selected ITCs was also tested on selected cancer cell lines: A549, MESSA and MESSA/DX‐5, HL60 and HL60MX2, BALB/3T3, and 4T1. These compounds were assessed for their mechanism of action as inducers of cell‐cycle arrest and apoptosis. Ethyl (6‐isothiocyanatohexyl)(phenyl)phosphinate ( 71 ) was tested in vivo on the 4T1 cell line and demonstrated moderate antitumor activity, similar to that benzyl isothiocyanate and cyclophosphamide.     

Influence of indigenous yeasts on the fermentation and volatile profile of plum brandies

The aim of this study was to determine the influence of different yeasts isolated from fresh blue plum fruits (Aureobasidium sp.) and spontaneously fermenting plum musts (Kloeckera apiculata and Saccharomyces cerevisiae), as well as commercial wine and distillery strains, on the fermentation and chemical composition of plum brandies. Gas chromatography methods were used to detect major volatile components. The most rapid fermentation occurred in musts inoculated with S. cerevisiae. However, the highest concentration of ethanol was detected in samples after spontaneous fermentation (8.40% v/v). Plum brandies obtained after distillation contained from 66.3 (K. apiculata) up to 74.3% v/v ethanol (spontaneous fermentation). The samples after spontaneous fermentation were distinguished by a high content of acetoin, ethyl acetate and total esters, accompanied by a low level of methanol and fusel alcohols. Non-Saccharomyces yeasts were responsible for higher concentrations of esters and methanol, while S. cerevisiae strains resulted in increased levels of higher alcohols. It was also found that isolated indigenous strains of S. cerevisiae synthesized relatively low amounts of higher alcohols compared to commercial cultures. Samples obtained using the distillery strain of S. cerevisiae received the highest score (18.2) during sensory analysis and were characterized by a well-harmonised taste and aroma.     

Effects of metal cations on betanin stability in aqueous-organic solutions

An effect of metal cations on betanin stability was investigated in aqueous and organic-aqueous solutions. The presence of organic solvents (methanol, ethanol, and acetonitrile) affects substantially the pigments decomposition in acidic media induced by metal cations whose degrading action in such media is significantly higher than in aqueous solutions. The influence of Cu²⁺ on the stability was studied by spectrophotometry in more detailed manner, because of its ability to form complexes with betanin. The possibility of a complex formation between betanin and Ni²⁺ was also stated at pH 7–8; its relatively high stability in aqueous samples was observed. A presence of numerous products of betanin decomposition was detected in the wavelength range 380–500 nm in spectra obtained for most of metal cations investigated, especially for higher concentrations of the organic solvents.     

The properties of soldering mask hardened by means of UV using acrylate and methacrylate oligomers

The properties of soldering masks based on epoxyacrylic, epoxymethacrylic esters, and monomers: 2-ethylhexyl acrylate, triethylene glycol dimethacrylate, and triethylene glycol phthalate dimethacrylate have been described. The thixotropic properties, printability, adhesion to the surface, and resistance to soldering have been determined. © 1995 John Wiley & Sons, Inc.     

Removal of antimony from copper by injection of soda ash

The removal of Sb from molten copper is of importance in the development of processes which can smelt copper concentrates directly into copper in a single furnace. A promising method is injection of oxygen and sodium carbonate in a modified anode furnace. This study encompassed a thermodynamic analysis of the impurity removal reactions and an experimental investigation of antimony removal from molten copper in a 15 kW induction furnace. The results showed that the reaction was controlled by diffusion of Sb in the metal phase. The reaction between metal and injected flux can be divided into two subprocesses-. (1) “transitory contact” reaction to the injected flux particles as they rise through the melt and (2) “permanent contact” reaction across the interface between the metal bath and the supernatant slag layer. On the basis of the experimental work, the overall volumetric mass transfer coefficient (cm³/s) at 1473 K was expressed in terms of the two subprocesses as follows:(k _d A) _ov = (k _d A) _pc +(k _d A) _tc = 1.25Q _g ^0.29 + 0.28(H Q _f ) whereQ _g is the injection gas flow rate in normal liters per minute,H is the depth of injection in centimeters, andQ _f the rate of flux injection in grams per second.     

Application of composites to impact energy absorption

The sleeve, conical simple composite elements and polymer foam filled composite conical element behaviour during failure are presented and discussed. The impact energy in these elements is absorbed in progressive fracture process. Possibilities of energy absorption panels – the great structures made from simple elements in a certain military and civilian field are demonstrated.     

Monolithic versus hierarchical approach to integrated scheduling in a supply chain

The two approaches, monolithic and hierarchical, with a set of mixed integer programming formulations are proposed and compared for multi-objective integrated scheduling in a customer driven supply chain. The supply chain consists of multiple manufacturers (suppliers) of parts, a single producer of finished products and a set of customers who generate final demand for the products. Each supplier has a number of identical production lines in parallel for the manufacture of parts, and the producer has a flexible assembly line for assembly of products. Given a set of orders, the problem objective is to determine which orders are to be provided with parts by each supplier, find a schedule for the manufacture of parts by each supplier and for the delivery parts from each supplier to the producer, and find a schedule for the assembly of products for each order by the producer, such that a certain performance measure of the supply chain is optimised. The selection of the parts supplier for each order is combined with due date setting for some orders, subject to the suppliers and the producer available capacity. Different objective functions are considered that take into account both customer service level and total manufacturing, delivery and production cost. Numerical examples are presented that are modelled by real-world integrated scheduling in a customer driven supply chain of high-tech products, and some computational results are reported to compare the two approaches.     

Changes in structure of psoas major and minor and semitendinosus muscles of calves, heifers and cows during post-mortem ageing

Changes occurring during post-mortem ageing in structure of psoas major and minor (PM) and semitendinosus (ST) muscles of calves, heifers and cows were observed. Samples from muscles taken 3 h after slaughter and after 6 and 12 days of storage at the temperature of 4?°C were analysed using light and transmission electron microscopy. Three hours after slaughter muscle fibres were close to each other and sarcomeres showed normal structure of A- and I-bands, M-lines and Z-disks. The space between myofibrils and sarcolemma and also between single myofibrils in muscle fibres increased during storage. Structure of sarcomeres underwent continuous degradation, length of sarcomeres increased due to enlargement of I-bands accompanied by Z-disk degradation. During ageing structural changes in myofibrils took place faster, were more intensive in muscles of younger animals and were more extensive and faster in PM than in ST muscles.