片上系统集成的系统级设计

介绍了片上系统集成（ＳＯＣ）的概念,重点阐述了系统级设计（ＳＬＤ）所面临的问题及其解决办法,包括必要性、设计划分和设计重用,最后说明了基于平台设计（ＰＢＤ）的概念,我们系统级设计的最后目标就是要促成基于平台的设计。     

An improved zero-voltage and zero-current-switching full-bridge PWMconverter using a simple resonant circuit

An improved zero-voltage and zero-current-witching full-bridge pulsewidth modulation (ZVZCS-FB-PWM) DC-to-DC converter is presented and analyzed. An auxiliary resonant circuit, which consists of a switch and a capacitor, are added to provide zero-current switching (ZCS) conditions to the primary lagging-leg switches. Due to the auxiliary circuit, when the primary current is being extinguished, the voltage applied on the leakage inductance of the transformer is larger than DC-link voltage. This large voltage increases the maximal output current that can be handled in ZCS. Furthermore, the auxiliary switch softly turns on and turns off     

Medical image compression by discrete cosine transform spectralsimilarity strategy

Due to bandwidth and storage limitations, medical images must be compressed before transmission and storage. However, the compression reduces the image fidelity, especially when the images are compressed at low bit rates. The reconstructed images suffer from blocking artifacts and the image quality is severely degraded under high compression ratios. In this paper, we present a strategy to increase the compression ratio with low computational burden and excellent decoded quality. We regard the discrete cosine transform as a bandpass filter to decompose a sub-block into equal-sized bands. After a band-gathering operation, a high similarity property among the bands is found. By utilizing the similarity property, the bit rate of compression can be greatly reduced. Meanwhile, the characteristics of the original image are not sacrificed. Thus, it can avoid the misdiagnosis of diseases. Simulations were carried out on different kinds of medical images to demonstrate that the proposed method achieves better performance when compared to other existing transform coding schemes, such as JPEG, in terms of bit rate and quality. For the case of angiogram images, the peak signal-to-noise-ratio gain is 13.5 dB at the same bit rate of 0.15 bits per pixel when compared to the JPEG compression. As for the other kinds of medical images, their benefits are not so obvious as for angiogram images; however, the gains for them are still 4-8 dB at high compression ratios. Two doctors were invited to verify the decoded image quality; the diagnoses of all the test images were correct when the compression ratios were below 20     

超塑性Y-TZP增韧陶瓷超细粉末的研究

用化学共沉淀法制备了3mol％Y_2O_3-ZrO_2超细粉末。利用热分析,x射线,透射电镜,颗粒粒度分析仪分析了粉料的相组成;颗粒形貌、大小;粉料的团聚状态;化学组成的均一性以及其烧结性能,并结合烧结试样的显微结构和力学性能对粉末的性能做出了评价。实验表明,所制备的粉料组成较为均匀;粒度分布窄;团聚体尺寸小,烧结活性高;颗粒粒度约为200(?)。粉料的相组成主要为四方相和约26％的单斜相。3Y-TZP陶瓷材料三点弯曲强度达1479.14MPa,断裂韧性为13.2MPa·m~(1/2),超塑性压缩变形达190％。     

Kinetic Analysis of Solution-Precipitation During Liquid-Phase Sintering of Alumina

Densification controlled by solution-precipitation during liquid-phase sintering was analyzed for the aluminamagnesium aluminosilicate glass system. As a model system for liquid-phase sintering, narrowly sized alumina powders and up to 20 vol% magnesium aluminosilicate glass samples were isothermally sintered at 1550° to 1650°C. Densification rate increases with increasing liquid content and sintering temperature but decreases with increasing density. For samples with >15% grain growth, the densification rate during the solution-precipitation stage of sintering was proportional to (particle size)⁻² and thus interface reaction-controlled. Activation energies ranged from 270 to 500 kJ/mol over the relative density range of 66% to 96%, respectively. The low activation energy is attributed to densification by particle rearrangement, whereas the higher activation energy is due to densification controlled by interface-reaction-controlled solution-precipitation. Intermediate activation energies are attributed to simultaneous densification by the two mechanisms.     

Streaming Media and Multimedia Conferencing Traffic Analysis Using Payload Examination

This paper presents a method and architecture to analyze streaming media and multimedia conferencing traffic. Our method is based on detecting the transport protocol and port numbers that are dynamically assigned during the setup between communicating parties. We then apply such information to analyze traffic generated by the most popular streaming media and multimedia conferencing applications, namely, Windows Media, Real Networks, QuickTime, SIP and H.323. We also describe a prototype implementation of a traffic monitoring and analysis system that uses our method and architecture.     

Flux-based two-degrees-of-freedom algorithm for three-phase electronic converter control

This letter integrates the tracking robustness of two-degrees-of-freedom control and fast dynamic response of flux-based, pulse-width modulation to develop a new current controller for high performance, three-phase electronic converter control. Theoretical analysis shows that the controller can simultaneously achieve good steady-state, transient and harmonic performance, which are challenges not previously met by existing current controllers reported in the literature. Experimental results are presented to verify the performance and practicality of the proposed controller.     

A 10-bit 205-MS/s 1.0- mm2 90-nm CMOS Pipeline ADC for Flat Panel Display Applications

This paper describes a 10-bit 205-MS/s pipeline analog-to-digital converter (ADC) for flat panel display applications with the techniques to alleviate the design limitations in the deep-submicron CMOS process. The switched source follower combined with a resistor-switch ladder eliminates the sampling switches and achieves high linearity for a large single-ended input signal. Multistage amplifiers adopting the complementary common-source topology increase the output swing range with lower transconductance variation and reduce the power consumption. The supply voltage for the analog blocks is provided by the low drop-out regulator for a high power-supply rejection ratio (PSRR) under the noisy operation environment. The pipeline stages of the ADC are optimized in the aspect of power consumption through the iterated calculation of the sampling capacitance and transconductance. The ADC occupies an active area of 1.0 mm² in a 90-nm CMOS process and achieves a 53-dB PSRR for a 100-MHz noise tone with the regulator and a 55.2-dB signal-to-noise-and-distortion ratio for a 30-MHz 1.0-V_PP single-ended input at 205 MS/s. The ADC core dissipates 40 mW from a 1.0-V nonregulated supply voltage.     

Performance Enhancement of Hybrid TDOA/AOA Using Multipath Delay Estimation

Wireless Personal Communications - Wireless solar blind ultraviolet (UV) scattering communication is a new type of atmosphere optics communication technology with the important and potential...