Intrinsic Elastic, Dielectric, and Piezoelectric Losses in Lead Zirconate Titanate Ceramics Determined by an Immittance-Fitting Method

The material coefficients of "soft" and "hard" lead zirconate titanate (PZT) ceramics were determined as complex values by the nonlinear least-squares-fitting of immittance data measured for length-extensional bar resonators. The piezoelectric d -constant should be a complex value to obtain a best fitting between observed and calculated results. Because the elastic, dielectric, and piezoelectric losses determined in this process were not "intrinsic" losses, a calculation process to evaluate the "intrinsic" losses was proposed. It was confirmed that the intrinsic losses were smaller than the corresponding extrinsic losses. The intrinsic piezoelectric loss existed in both soft and hard PZTs; ∼50% of the loss of piezoelectric d -constant was derived from the elastic and dielectric losses. The most notable difference between the soft and hard PZTs was observed in their elastic losses.     

Diffusion/adsorption model of cellulose dyeing. II. Ordinary cellulose–direct dye system

The diffusion and adsorption of C.I. Direct Yellow 12 and Blue 15 in water-swollen ordinary cellophane sheets were examined at various ionic strengths. The concentration dependence of apparent diffusion coefficients, D_c, for these dyes was obtained from the diffusion profiles in the substrate, which were measured by the use of the cylindrical film roll method. The decrease of apparent porosity with an increase in the amounts of adsorption was observed. To explain the diffusion/adsorption behaviors of these systems, a variable porosity model was proposed and was applied to analyze the concentration dependence of D_c's. The diffusion/adsorption behaviors of these dyes could be quantitatively described by this model at relatively low ionic strengths. At higher ionic strengths and/or lower values of C, i.e., at the large values of C_im/C_m, where the C's are the concentrations of immobilized (suffix im) and mobile (suffix m) species, it needed to introduce the concept of dynamic equilibria which occurred simultaneously with diffusion but deviated from the true equiliblia measured by the adsorption experiments.     

Temperature Dependence of Young's Modulus and Internal Friction in Alumina, Silicon Nitride, and Partially Stabilized Zirconia Ceramics

The temperature dependence of Young's modulus and internal friction (Q⁻¹)in alumina, silicon nitride, and partially stabilized zirconia (Y-PSZ) ceramics was studied. Little change in Q⁻¹ was found for alumina, whereas Q⁻¹ for silicon nitride ceramics increased above 700°C. The Q⁻¹ of Y-PSZ increased markedly with increasing temperature up to a peak at ∼200°C.     

Evaluating card-based protocols in terms of execution time

International Journal of Information Security - Card-based cryptography is an attractive and unconventional computation model; it provides secure computing methods using a deck of physical cards....     

Superconductivity in the tetragonal phase of La1.9Bi0.1CuO4+δ annealed under high oxygen pressure

We have investigated the relation between the crystal structure and superconductivity in La_1.9Bi_0.1CuO₄₊ , in which the phase separation observed in La₂CuO₄₊ is suppressed. A phase diagram in theT– plane is given for La_1.9Bi_0.1CuO₄₊ with excess oxygen. For very small values, the crystal structure is orthorhombic, and an orthorhombic-tetragonal phase transition occurs markedly at 0.03 in the measured temperature range between 13 and 293 K. Superconductivity is observed in the range of 0.04<<0.11. This is clear evidence thathigh-T _c superconductivity also appears in the tetragonal phase.     

Self-organizing maps with asymmetric neighborhood function

The self-organizing map (SOM) is an unsupervised learning method as well as a type of nonlinear principal component analysis that forms a topologically ordered mapping from the high-dimensional data space to a low-dimensional representation space. It has recently found wide applications in such areas as visualization, classification, and mining of various data. However, when the data sets to be processed are very large, a copious amount of time is often required to train the map, which seems to restrict the range of putative applications. One of the major culprits for this slow ordering time is that a kind of topological defect (e.g., a kink in one dimension or a twist in two dimensions) gets created in the map during training. Once such a defect appears in the map during training, the ordered map cannot be obtained until the defect is eliminated, for which the number of iterations required is typically several times larger than in the absence of the defect. In order to overcome this weakness, we propose that an asymmetric neighborhood function be used for the SOM algorithm. Compared with the commonly used symmetric neighborhood function, we found that an asymmetric neighborhood function accelerates the ordering process of the SOM algorithm, though this asymmetry tends to distort the generated ordered map. We demonstrate that the distortion of the map can be suppressed by improving the asymmetric neighborhood function SOM algorithm. The number of learning steps required for perfect ordering in the case of the one-dimensional SOM is numerically shown to be reduced from O(N(3)) to O(N(2)) with an asymmetric neighborhood function, even when the improved algorithm is used to get the final map without distortion.     

Agglomeration control of hydroxyapatite nano-crystals grown in phase-separated microenvironments

Materials synthesis processes that require high temperatures consume large quantities of energy that generate an environmental burden. We attempted to synthesize hydroxyapatite (HAp) nano-crystals without firing or melting. “Water in oil” (W/O) emulsions were employed as microreactors for HAp formation. The surfactant-bounded water mediated HAp crystal nucleation, and HAp nano-crystallites were obtained. The obtained particles were aggregates composed of plate-like nano-crystals and monodisperse tiny crystals. Utilization of the W/O emulsions resulted in tunable nucleation frequency and the reactant provision, and yielded HAp nano-crystals with characteristic agglomeration properties.     

Stochastic Asset Pricing with Seismic Hazard Risk

Since cash flow of asset in the long run is generally subject to economic fluctuation, and also to potential damage due to seismic hazard risk, asset pricing is more relevantly evaluated, provided that uncertainties of both cash flow and seismic risk are properly taken into account. This study will propose a discounted cash flow method to evaluate asset pricing, in which incomes gained from asset are modeled as a Markov process and seismic loss is modeled due to only one earthquake event during the service time. A numerical example is demonstrated for an 11 story steel reinforced commercial building considering the service time of 50 years. Various risk–asset price curves are numerically obtained in the form of probability of excess versus asset price with discount rate as a parameter for cases with and without earthquake loss taken into account, and for a case in which earthquake strengthening measure is implemented. These curves contribute information to decision makers in charge of risk and investment management.     

Development of silicon wafer packaging technology for deep UV LED

This paper reports a deep‐ultraviolet LED (deep‐UV‐LED) package based on silicon MEMS process technology (Si‐PKG). The package consists of a cavity formed by silicon crystalline anisotropic etching, through‐silicon vias (TSVs) filled with electroplated Cu, bonding metals made of electroplated Ni/AuSn and a quartz lid for hermetic sealing. A deep‐UV LED die is directly mounted in the Si‐PKG by AuSn eutectic bonding without a submount. It has advantages in terms of size, heat dissipation, light utilization efficiency, productivity and cost over conventional AlN ceramic packages. We confirmed a light output of 30 mW and effective reflection on Si (111) cavity slopes in the Si‐PKG. Based on simulation, further improvement of the optical output is expected by optimizing DUV‐LED die mount condition.