Light scattering of ideal random copolymers in bulk

Copolymerization is a useful way of modifying the physical properties of a material to meet specific needs, but it can result in a significant light scattering loss due to dielectric fluctuations in the material. Ideal random copolymers are known to be more transparent; however, the light-scattering properties of such copolymers in bulk have not been fully studied. In this paper, two representative ideal random copolymers were synthesized: methyl methacrylate (MMA)/benzyl methacrylate (BzMA) and MMA/2,2,2-trifluoroethyl methacrylate (TFEMA). The effects of copolymer composition and polymerization temperature on the light-scattering properties were investigated. Polarized light scattering (V_V) in copolymers was more sensitive to the polymerization temperature. Higher temperatures were necessary to homogenize the dielectric fluctuations and minimize excess light scattering. However, once the heterogeneous structures vanished, the copolymer bulk exhibited low scattering losses, which are comparable with homopolymers, over the entire range of copolymer compositions.     

A 65 nm Single-Chip Application and Dual-Mode Baseband Processor With Partial Clock Activation and IP-MMU

Supporting both WCDMA with HSDPA and GSM/GPRS/EDGE, the 9.3 times 9.3 mm² SoC fabricated in triple-Vth 65 nm CMOS, has three CPU cores and 20 separate power domains. Unused power domains can be powered down to reduce the leakage power. Partial clock activation scheme especially focused on music playback scene dynamically stops a PLL and clock trees when not necessary and reduces power consumption from 33.6 mW to 19.6 mW. IP-MMU translates virtual address to physical address for 18 hardware-IPs and virtual address space can be allocated when necessary and can be freed after its operation, reducing external memory by 43 MB. Video performance of D1 (720 times 520) size with 30 frames per second for MPEG/AVC decoding and encoding can be achieved under mixed virtual and physical address usage.     

High-Performance Induction Motor Drive System Using a PWM Inverter

A high-performance speed control system for cage induction motors is described which utilizes a PWM inverter. The effects of primary current coincidence and machine constant variation on system characteristics such as response time, torque precision, and operating noise were investigated. Based on the results obtained, new control methods have been devised; one varies the gain of the current controller in proportion to the primary frequency, and a second compensates for the slip frequency by using the deviation between the flux reference value and the actual value. Effectiveness of the compensation methods was confirmed in tests.     

Interactive aesthetic curve segments

To meet highly aesthetic requirements in industrial design and styling, we propose a new category of aesthetic curve segments. To achieve these aesthetic requirements, we use curves whose logarithmic curvature histograms (LCH) are represented by straight lines. We call such curves aesthetic curves. We identify the overall shapes of aesthetic curves depending on the slope of LCH α, by imposing specific constraints to the general formula of aesthetic curves. For interactive control, we propose a novel method for drawing an aesthetic curve segment by specifying two endpoints and their tangent vectors. We clarify several characteristics of aesthetic curve segments.     

Highly reliable copper dual-damascene interconnects with self-formed MnSi/sub x/O/sub y/ barrier Layer

Copper (Cu) dual-damascene interconnects with a self-formed MnSi/sub x/O/sub y/ barrier layer were successfully fabricated. Transmission electron microscopy shows that approximately 2-nm thick and continuous MnSi/sub x/O/sub y/ layer was formed at the interface of Cu and dielectric SiO/sub 2/, and that no barrier was formed at the via bottom because no oxygen was at the via bottom during annealing. No leakage-current increase was observed, and electron energy loss analysis shows that no Cu was in SiO/sub 2/, suggesting that MnSi/sub x/O/sub y/ layer has sufficient barrier properties for Cu, and that the concept of self-forming barrier process works in Cu dual-damascene interconnects. Via chain yield of more than 90% and 50% reduction in via resistance were obtained as compared with physical vapor deposited tantalum barrier, because there is no barrier at the via bottom. In addition, no failure in the stress-induced voiding measurement was found even after a 1600-h testing. No failure in electromigration (EM) testing was found, as the electron flow is from the lower level interconnects through via up to upper level interconnects even after 1000-h testing. At least, four times EM lifetime improvement was obtained in the case of electron flow from upper level interconnect through via down to lower level interconnects. Significant EM lifetime improvement is due to no flux divergence site at the via bottom, resulting from there being no bottom barrier at the via.     

19-nor vitamin-D analogs: a new class of potent inhibitors of proliferation and inducers of differentiation of human myeloid leukemia cell lines

We have studied the in vitro biological activities and mechanisms of action of 1,25-dihydroxyvitamin D3 (1,25D3) and nine potent 1,25D3 analogs on proliferation and differentiation of myeloid leukemia cell lines (HL-60, retinoic acid-resistant HL-60 [RA-res HL-60], NB4 and Kasumi-1). The common novel structural motiff for almost all the analogs included removal of C-19 (19-nor); each also had unsaturation of the side chain. All the compounds were potent; for example, the concentration of analogs producing a 50% clonal inhibition (ED50) ranged between 1 x 10(-9) to 4 x 10(-11) mol/L when using the HL-60 cell line. The most active compound [1, 25(OH)2-16,23E-diene-26-trifluoro-19-nor-cholecalciferol (Ro 25-9716)] had an ED50 of 4 x 10(-11) mol/L; in contrast, the 1,25D3 produced an ED50 of 10(-9) mol/L with the HL-60 target cells. Ro 25-9716 (10(-9) mol/L, 3 days) was a strong inducer of myeloid differentiation because it caused 92% of the HL-60 cells to express CD11b and 75% of these cells to reduce nitroblue tetrazolium (NBT). This compound (10(-8) mol/L, 4 days) also caused HL-60 cells to arrest in the G1 phase of the cell cycle (88% cells in G1 v 48% of the untreated control cells). The p27(kip-1), a cyclin-dependent kinase inhibitor which is important in blocking the cell cycle, was induced more quickly and potently by Ro 25-9716 (10(-7) mol/L, 0 to 5 days) than by 1,25D3, suggesting a possible mechanism by which these analogs inhibit proliferation of leukemic growth. The NB4 promyelocytic leukemia cells cultured with the Ro 25-9716 were also inhibited in their clonal proliferation (ED50, 5 x 10(-11) mol/L) and their expression of CD11b was enhanced (80% positive [10(-9) mol/L, 4 days] v 27% untreated NB4 cells). Moreover, the combination of Ro 25-9716 (10(-9) mol/L) and all-trans retinoic acid (ATRA, 10(-7) mol/L) induced 92% of the NB4 cells to reduce NBT, whereas only 26% of the cells became NBT positive after a similar exposure to the combination of 1,25D3 and ATRA. Surprisingly, Ro 25-9716 also inhibited the clonal growth of poorly differentiated leukemia cell lines (RA-res HL-60 [ED50, 4 x 10(-9) mol/L] and Kasumi-1 [ED50, 5 x 10(-10) mol/L]). For HL-60 cells, Ro 25-9716 markedly decreased the percent of the cells in S phase of the cell cycle and increased the expression of the cyclin-dependent kinase inhibitor, p27(kip-1). In summary, 19-nor vitamin D3 compounds strongly induced differentiation and inhibited clonal proliferation of various myeloid leukemia cell lines, suggesting a therapeutic niche for their use in myeloid leukemia.     

The dependence of structure and conductivity in three-dimensional phosphate ionic conductors on composition

Two series of solid solutions, Na _x Ca_(1−x)/2Zr₂(PO₄)₃ (NCZP(x), 0⩽x⩽1) and Na _x Nb_1-x Zr_1+x (PO₄)₃(NNZP(x), 0⩽x⩽1), were synthesized. They were examined by powder X-ray diffraction, infra-red (i.r.) absorption and Raman scattering. Ionic conductivities of graphite coated samples were measured. A complete series of solid solutions was formed for NCZP(x), while a second phase was found forx<0.1 for NNZP(x). The i.r. and Raman spectra of their solid solutions consistently showed the formation of PO₄ tetrahedra with different geometries. The composition dependence of conductivity is interpreted on the basis of a structural change around Na⁺.     

Design, fabrication, and evaluation of crystal-cored fibers for efficient second-harmonic generation based on Cerenkov-radiation-type phase matching

A formulation for calculating the optical second-harmonic power based on the Cerenkov-radiation-type phase matching is derived for a crystal-cored fiber. The prerequisite condition for high efficiency is expressed by a simple relation by use of the refractive indices of a core crystal, a core radius, and a fundamental wavelength. An organic crystal-cored fiber is designed and practically fabricated by the guiding principle derived here. A blue second-harmonic wave of 1.4 mW is obtained from a 1-mm-long fiber by use of a 60-mW semiconductor laser, and the second-harmonic intensity agrees well with the prediction. Degradation of the organic core crystal caused by the generated blue wave is observed, and the lifetime of the device is evaluated.