Properties of graphite prepared from boron-doped pitch as an anode for a rechargeable Li ion battery

Boron-doped graphites were derived from a naphthalene-based pitch mixed with para-xylene glycol (PXG) or dimethyl para-xylene glycol (DMPXG) as a cross-linking agent and three types of boron-containing compounds as a graphitization catalyst, and their anode performances were investigated. The structural analysis of the obtained graphites revealed that PXG functioned mainly as a two-dimensional cross-linking agent during the heat treatment process and DMPXG functioned partially as a three-dimensional. The average interlayer spacing decreased and lattice constant, a₀, and graphitizability increased with increasing the amount of boron atoms added. The result indicated that the carbon atoms were replaced by boron atoms. The anode performance was improved by the enhancement of graphitizability. The structural parameters and anode performance of boron-doped graphites did not depend on the kind of boron-containing compounds but the amount of boron atoms added in pitch and the kind of cross-linking agent.     

Syndiotactic‐specific radical polymerization of N‐isopropylacrylamide in toluene at low temperatures in the presence of silyl alcohols

The radical polymerization of N‐isopropylacrylamide was carried out in toluene at low temperatures in the presence of silyl alcohols, such as triethylsilanol. Poly(N‐isopropylacrylamide) with a racemo dyad content of 75% was obtained at ? 80 °C with a 4:1 triethylsilanol to monomer ratio loading. NMR analysis suggests that the mechanism for syndiotactic induction, in the presence of silyl alcohols, may be similar to that observed with alkyl alcohols. In this case, a 1:2 complex formation, via hydrogen bonding interactions, leads to the induction of syndiotactic specificity. Copyright © 2012 Society of Chemical Industry     

Synthesis of cyclic poly(methyl methacrylate) by the intramolecular cyclization of α-amino, ω-carboxyl heterodifunctional poly(methyl methacrylate)

Summary α-Amino, ω-carboxyl heterodifunctional poly(methyl methacrylate) was prepared by a living anionic polymerization of methyl methacrylate using N,N'-diphenylethylenediamine monolithium amide and succinic anhydride as an initiator and terminator, respectively. Its intramolecular cyclization was carried out to obtain a well-defined cyclic poly(methyl methacrylate). Received: 27 June 2001/Accepted: 16 July 2001     

Measurement of High-Temperature Elastic Properties of Ceramics Using a Laser Ultrasonic Method

Young's modulus and Poisson's ratio of SiC ceramics at temperatures >1400°C were obtained using a laser ultrasonics method that included a Fabry-Pérot interferometer (LUFP). At temperatures <1000°C, Young's modulus and Poisson's ratio measured using the LUFP method agreed well with those measured using standard contact methods, such as the resonance method and the ultrasonic pulse method. These results showed that the LUFP method is a powerful tool for measuring high-temperature elastic properties of advanced ceramics in a noncontact manner.     

Fine-tuned,molecular-composite,organosilica membranes for highly efficient propylene/propane separation via suitable pore size

Fine-tuned, molecular-composite, organosilica membranes were fabricated via the co-condensation of organosilica precursors bis(triethoxysilyl)acetylene (BTESA) and bis(triethoxysilyl)benzene (BTESB). Fourier transform infrared and UV–vis spectra confirmed the co-condensation behaviors of BTESA and BTESB. The evolution of the network structure indicated that the incorporated BTESB decreased the membrane pore size, which was determined by a modified gas translation model according to the steric effect of the phenyl groups. The incorporation of BTESB to BTESA finely tuned the membrane structure and endowed the resultant composite membrane with improved separation properties. The BTESAB 9:1 membrane (molar ratio of BTESA/BTESB was 9:1) exhibited high C₃H₆ permeance at 4.5 × 10⁻⁸ mol m⁻² s⁻¹ Pa⁻¹ and a C₃H₆/C₃H₈ permeance ratio of 33 at 50°C. One of the most important developments of this study involved clearly defining the relationship between membrane pore size and C₃H₆/C₃H₈ separation performance for organosilica membranes in single and binary separation systems.     

Thermodynamic work of adhesion and peel adhesion energy of dimethoxysilyl‐terminated polypropylene oxide/epoxy resin system jointed with polymeric substrates

The characterization of the interfacial surface of a dimethoxysilyl‐terminated polypropylene oxide (DMSi–PPO)/diglycidylether of bisphenol A (DGEBA) system, which has the phase structure of DGEBA particles in a DMSi–PPO matrix, was investigated by using model joints with polymeric substrates. The surface free energy (γ) of the DMSi–PPO/DGEBA system had varied with the γ of each substrate. When the system contacted to low surface free energy materials such as Teflon, polypropylene, and polyethylene, the γ of the system showed about 14.3–31.6 mJ/m²; on the other hand, when the system contacted to high surface free energy substrates such as polyethylene–telephthalate and polyimide, the γ of the system showed 50.4 and 64.6 mJ/m², respectively, because the concentration of the DGEBA as a polar component in the system changed around these interfaces. In the low surface energy substrates used, the actual peel adhesion energy value was in good agreement with the thermodynamic work of adhesion (Wa) determined independently. However, in the high surface energy materials used, the peel adhesion energies were 10³–10⁴ times larger than Wa because the energy was dissipated viscoelastically at the jointed points. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 1920–1930, 2001     

Liposome‐Based in Vitro Evolution of Aminoacyl‐tRNA Synthetase for Enhanced Pyrrolysine Derivative Incorporation

Methanosarcina species pyrrolysyl‐tRNA synthetase (PylRS) attaches Pyl to its cognate amber suppressor tRNA. The introduction of two mutations (Y384F and Y306A) into PylRS was previously shown to generate a mutant, designated LysZ‐RS, that was able to attach N‐benzyloxycarbonyl‐L ‐lysine (LysZ) to its cognate tRNA. Despite the potential of LysZ derivatives, further LysZ‐RS engineering has not been performed; consequently, we aimed to generate LysZ‐RS mutants with improved LysZ incorporation activity through in vitro directed evolution. Using a liposome‐based in vitro compartmentalization (IVC) approach, we screened a randomly mutagenized gene library of LysZ‐RS and obtained a mutant that showed increased LysZ incorporation activity both in vitro and in vivo. The ease and high flexibility of liposome‐based IVC should enable the evolution of not only LysZ‐RS that can attach various LysZ derivatives but also of other enzymes involved in protein translation.     

Insights from ab initio molecular dynamics simulations for a multicomponent oxide glass

It remains a challenge to establish structural models of multicomponent oxide glass systems. In this study, we have investigated 68.3SiO₂–16.1B₂O₃–4.2Al₂O₃–11.4Na₂O glass and melt structures by ab initio molecular dynamics (AIMD) simulations. The atomic configurations obtained from AIMD simulations were validated against ¹⁷O solid‐state NMR spectrum under 24.0 T and neutron diffraction data, and excellent agreement was achieved. The bond lengths, angles, and coordination geometries were statistically analyzed for each atomic species. Here we particularly address the role of minor atomic species such as five‐coordinate Si (Si^V) and Al (Al^V). The Si^V–O bond lengths and O–Si^V–O angle distribution in the glass indicated 1.718 Å and three peaks at 90°, 120°, and 175°, which are assigned to a coordination geometry of the trigonal bipyramidal structure. Ring statistic analysis revealed that Si^V and Al^V were found to preferentially contribute to the formation of small ring sizes.     

Effect of acid treatment on thermal extraction yield in ashless coal production

Coals of different ranks were acid-treated in aqueous methoxyethoxy acetic acid (MEAA), acetic acid (AA), and HCl. The acid-treated coals were extracted with polar N-methyl-2-pyrrolidinone (NMP) and nonpolar 1-methylnaphthalene (1MN) solvents at temperatures from 200 to 360 °C for 10-60 min. The thermal extraction yields with NMP for some acid-treated low-rank coals increased greatly; for example, the extraction yield for Wyodak coal (%C; 75.0%) increased from 58.4% for the raw coal to 82.9% for coal treated in 1.0 M MEAA. Conversely, the extraction yields changed minimally for all the acid-treated coals extracted in 1-MN. The type and concentration of acid affected the extraction yield when NMP was used as the extraction solvent. With increasing MEAA concentration from 0.01 to 0.1 M, the extraction yield for Wyodak coal increased from 66.3 to 81.4%, and subsequently did not change clearly with concentration. Similar changes in the extraction yield with acid concentration were also observed with AA and HCl. The de-ashing ratio for coals acid-treated in MEAA, AA, and HCl also increased greatly with concentration from 0.01 to 0.1 M, which corresponded to the change in the thermal extraction yield in NMP. For the acid-treated coals, high extraction yields were obtained at lower extraction temperatures and shorter extraction times than for the raw coal. The mechanisms for the acid treatment and thermal extraction are discussed.