Temperature Dependence of the Raman Spectrum in Lithium Oxide Single Crystal

Temperature dependence of the Raman spectrum of lithium oxide single crystal has been measured over a temperature range of 80 to 1073 K. The frequency shift and the line width of the Raman spectrum in lithium oxide were about 531 and 4.5 cm^-1 at 80 K, respectively. At 1073 K, the frequency shift and the line width attained the values of 464 and 112 cm^-1, respectively. The strong temperature dependence of the frequency shift and line width was compared with data from some crystals with a fluorite structure.     

Dielectric properties of Permalloy granular composite materials

Dielectric and electrical properties of Permalloy granular composite materials have been studied considering the application to left-handed meta-materials. Surface oxidized Permalloy particles have high surface electrical resistance; the eddy current effect in the composite structure is suppressed. The electrical conductivity of compacted Permalloy particles increases with increasing temperature and indicates the semiconductive layer formation on the particle. The low frequency ac electrical conductivity of Permalloy composite materials shows a drastic increase in the particle content between 50 and 60 vol.%. Electrical permittivity spectra of Permalloy composites show a non-metallic characteristic and the enhancement of permittivity is observed with increase of Permalloy particle content.     

New dissimilarity measure for recognizing noisy subsequence trees

Tree is a data structure used to express various objects such as semistructured data and genes. When objects are represented as trees, computing tree similarity is essential for pattern recognition and retrieval. This paper considers the noisy subsequence tree recognition problem whose purpose is to recognize the original tree, given its noisy subsequence tree. Previous research on this problem relied on constrained tree edit distance to measure the dissimilarity. However, the number of relabelings must be predetermined to compute it. This paper proposes a new dissimilarity measure for this problem. Our dissimilarity measure is obtained by counting the node edit operations included in the unit‐cost tree edit distance that contribute to the matching of node labels. The number of relabelings need not be specified to compute our dissimilarity measure. Moreover, our measure achieves more accurate recognition performance and faster execution speed than the constrained tree edit distance. Our measure is also useful to solve the tree inclusion problem which is the problem of deciding whether a tree includes another tree and shows the extent of approximate tree inclusion when a tree incompletely includes another tree. © 2011 Wiley Periodicals, Inc.     

Logichart — Intelligible Program Diagram for Prolog and its Processing System

An intelligible program diagram called Logichart has been developed for Prolog visualization. Its syntax rules and layout rules are formalized in terms of an attribute graph grammar. This grammar is underlain by a context–free graph grammar whose productions are defined to formalize the graph–syntax rules of Logichart diagrams. Semantic rules attached to the productions are defined in such a way that they can extract the layout information needed to display a Logichart diagram as attributes. Our Prolog visualization system, which has been implemented based on the attribute graph grammar, can draw a Logichart diagram for any correct Prolog program (completeness), and any Logichart diagram displayed by the system is always valid for the grammar (soundness). The system can also display the execution of a Prolog program in real time; that is, the Logichart diagram is dynamically updated as the program runs.     

The evaluation of the emotion by near-infrared spectroscopy

Our purpose is to develop the technology for evaluating emotion objectively from the oxygenated hemoglobin within a brain. Nowadays, Japan is an aging society. The elderly people who need care will increase from now on increasingly. In the case of the person requiring the care who lost the function to convey an intention especially, the objective judgment to a physical and mental pain is required. Persons requiring care will also increase in number with the increase in this population. We gave subject stimulus of a comfortable or an uncomfortable sound and measured concentration of the oxygenated hemoglobin of a frontal lobe part by near-infrared spectroscopy. Based on the experimental result, a comfortable state or an uncomfortable state was distinguished by concentration of the oxygenated hemoglobin using the bayesian network. As a result, we were able to estimate the subject’s psychological condition.     

High-aspect-ratio through-hole array microfabricated in a PMMA plate for monodisperse emulsion production

Microchannel (MC) emulsification is a promising technique for producing monodisperse emulsions consisting of highly uniform droplets. The authors developed a high-aspect-ratio microstructure (HARMST) made of poly(methyl methacrylate) (PMMA) as a new MC emulsification device. A PMMA straight-through MC array plate consisting of 31,250 through-holes with a 7.3 × 22.9-μm oblong section and a 200-μm depth was fabricated by a process of synchrotron radiation (SR) lithography and etching. Oblong MCs fabricated in a PMMA straight-through MC array were highly uniform with a coefficient of variation of less than 2%. The fabricated PMMA straight-through MC array plate was used to produce water-in-oil (W/O) emulsions. Monodisperse W/O emulsions with average droplet diameters of approximately 25 μm and a minimum coefficient of variation of 3.2% were produced via a hydrophobic PMMA straight-through MC array. The PMMA straight-through MC array plate also produced monodisperse W/O emulsions at droplet production rates of up to 1.7 × 10⁴/s. The PMMA straight-through MC array plates developed in this work are expected to expand the application field of emulsification using straight-through MC array plates, which have previously been made of single-crystal silicon.     

Design and control of JAIST active robotic walker

This paper presents the design and control of a novel assistive robotic walker that we call “JAIST active robotic walker (JARoW)”. JARoW is developed to provide potential users with sufficient ambulatory capability in an efficient, cost-effective way. Specifically, our focus is placed on how to allow easier maneuverability by creating a natural interface between the user and JARoW. For the purpose, we develop a rotating infrared sensor to detect the user’s lower limb movement. The implementation details of the JARoW control algorithms based on the sensor measurements are explained, and the effectiveness of the proposed algorithms is verified through experiments. Our results confirmed that JARoW can autonomously adjust its motion direction and velocity according to the user’s walking behavior without requiring any additional user effort.     

TEM analysis of high temperature annealed W nanostructure surfaces

Helium plasma irradiation and electron heating experiments were conducted using tungsten in the divertor simulator NAGDIS-II. Helium plasma irradiation to tungsten led to the formation of nanostructures on the surface, while the nanostructures were annihilated after the potential of the specimen was changed to positive for several 10 min so that electrons irradiated the sample without ion irradiation. The specimens were analyzed in detail by transmission electron microscope with the help of focused ion beam technique. It is revealed that the helium nano-bubbles still remained even after the nanostructures were disappeared from the surface. Porosity of the nanostructured tungsten was measured from the TEM images.     

Development of the Water Cooled Ceramic Breeder Test Blanket Module in Japan

The development of a Water Cooled Ceramic Breeder (WCCB) Test Blanket Module (TBM) is being performed as one of the most important steps toward DEMO blanket in Japan. For the TBM testing and evaluation toward DEMO blanket, the module fabrication technology development by a candidate structural material, reduced activation martensitic/ferritic steel, F82H, is one of the most critical items from the viewpoint of realization of TBM testing in ITER. In Japan, fabrication of a real scale first wall, side walls, a breeder pebble bed box and assembling of the first wall and side walls have succeeded. Recently, the real scale partial mockup of the back wall was fabricated. The fabrication procedure of the back wall, whose thickness is up to 90 mm, was confirmed toward the fabrication of the real scale back wall by F82H. Important key technologies are almost clarified for the fabrication of the real scale TBM module mockup. From the view point of testing and evaluation, development of the technology of the blanket tritium recovery, development of advanced breeder and multiplier pebbles and the development of the blanket neutronics measurement technology are also performed. Also, tritium production and recovery test using D-T neutron in the Fusion Neutronics Source (FNS) facility has been started as the verification test of tritium production performance. This paper overviews the recent achievements of the development of the WCCB TBM in Japan.