Periodical shedding of cloud cavitation from a single hydrofoil in high-speed cryogenic channel flow

In order to explain criteria for periodical shedding of the cloud cavitation, flow patterns of cavitation around a plano-convex hydrofoil were observed using a cryogenic cavitation tunnel of a blowdown type. Two hydrofoils of similarity of 20 and 60 mm in chord length with two test sections of 20 and 60 mm in width were prepared. Working fluids were water at ambient temperature, hot water and liquid nitrogen. The parameter range was varied between 0.3 and 1.4 for cavitation number, 9 and 17 m/sec for inlet flow velocity, and −8° and 8° for the flow incidence angle, respectively. At incidence angle 8°, that is, the convex surface being suction surface, periodical shedding of the whole cloud cavitation was observed on the convex surface under the specific condition with cavitation number and inlet flow velocity, respectively, 0.5, 9 m/sec for liquid nitrogen at 192°C and 1.4, 11 m/sec for water at 88°C, whereas under the supercavitation condition, it was not observable. Periodical shedding of cloud cavitation occurs only in the case that there are both the adverse pressure gradient and the slow flow region on the hydrofoil.     

A straight-bladed vertical axis wind turbine with a directed guide vane row — Effect of guide vane geometry on the performance —

The objective of this study is to show the effect of guide vane geometry on the performance. In order to overcome the disadvantages of vertical axis wind turbine, a straight-bladed vertical axis wind turbine (S-VAWT) with a directed guide vane row has been proposed and tested by the authors. According to previous studies, it was clarified that the performance of the turbine can be improved by means of the directed guide vane row. However, the guide vane geometry of S-VAWT has not been optimized so far. In order to clarify the effect of guide vane geometry, the effects of setting angle and gap between rotor blade and guide vane on power coefficient and starting characteristic were investigated in the experiments. The experimental study of the proposed wind turbine was carried out by a wind tunnel. The wind tunnel with a diameter of 1.8m is open jet type. The wind velocity is 8 m/s in the experiments. The rotor has three straight blades with a profile of NACA0018 and a chord length of 100 mm, a diameter of 0.6 m and a blade height of 0.7 m. The guide vane row consists of 3 arc plates.     

广色域印刷

一、广色域印刷产生的背景是什么呢: 1.时代发展的需要 当前,利用数码相机进行原稿输入的普及,喷墨打印机的广泛使用,以及随着RGB数字工作流程体系的构筑,为了适应这佯的印刷环境,使得广色域的印刷开始并将得到广泛的应用.     

Preparation of Pt-loaded TiO2 nanofibers by electrospinning and their application for WGS reactions

Preparation of Pt-loaded TiO₂ nanofibers and their catalytic performance for water gas shift (WGS) reactions have been explained in this work. The Pt-loaded TiO₂ nanofibers were obtained by electrospinning poly-ethylene oxide (PEO) aqueous solutions containing Ti(OH)_n slurry and Pt nanoparticles at room temperature, followed by calcination at 773 K for 4 h. The calcined nanofibers were rougher than the nanofibers of PEO/Ti(OH)_n/Pt due to the PEO degradation and oxidation of Ti(OH)_n to TiO₂. Diameters of the Pt-loaded TiO₂ nanofibers ranged between 200 and 900 nm. Catalytic activity of the Pt-loaded TiO₂ nanofibers for water gas shift (WGS) reactions was evaluated and it was observed that their activity was 5–7 times higher than that of a bulk catalyst. Such improvement is attributed to the larger surface area of the nanofiber catalyst compared to that of the bulk catalyst. To the best of our knowledge, this is the first demonstration of a synthesis of Pt-loaded TiO₂ nanofibers from a Ti(OH)_n nanoparticle slurry using electrospinning and its application to WGS reactions.     

Slow crystallization process from amorphous PbTiO3

The effect of isothermal annealing of amorphous PbTiO₃ at a temperature below the crystallization temperature, T_crys, has been investigated. Time dependent dielectric constant in the annealing process has been observed. From the experimental results, both the existence of the glass transition temperature, T_g, and the steadiness of dielectric constant at room temperature have been established.     

Mechanical properties of molybdenum neutron-irradiated at a high temperature

Molybdenum specimens prepared by two processes, powder-metallurgy (PM) and electron-beam melting (EB), were irradiated to a fast neutron fluence of 2.74 × 10²⁴n/m² (E_n? 1 MeV) at about 600°C (873 K), and their mechanical properties were studied in detail. It was shown that the degree of irradiation embrittlement in EB-Mo was smaller than that in PM-Mo, which might be caused by stronger grain-boundaries and probably smaller irradiation-hardening in the former. From the relation between the recovery of ductility and microstructural changes in post-irradiation annealed PM-Mo at 800 (1073 K), 1000 (1273 K) and 1200°C (1473 K), it was concluded that the recovery resulted from a decrease of irradiation hardening due to a rearrangement and a disappearance of depleted-zones, dislocation-loops and voids in order with increasing annealing temperature. An anomalous mode of fracture was observed in as-irradiated specimens, which consisted of inhomogeneous deformation, then brittle fracture not at the center but at the root of the deformation neck. This mode was observed in a narrow temperature range near the DBTT. A possible mechanism is discussed.