Track structure for low energy ions including charge exchange processes

The model and development is described of a new generation of Monte Carlo track structure codes. The code LEPHIST simulates full slowing down of low-energy proton history tracks in the range 1 keV-1 MeV and the code LEAHIST simulates low-energy alpha particle history tracks in the range 1 keV-8 MeV in water. All primary ion interactions are followed down to 1 keV and all electrons to 1 eV. Tracks of secondary electrons ejected by ions were traced using the electron code KURBUC. Microdosimetric parameters derived by analysis of generated tracks are presented.     

Characterization of the microbial community in an anaerobic ammonium-oxidizing biofilm cultured on a nonwoven biomass carrier

The enrichment and characterization of anaerobic ammonium-oxidizing biofilm cultures are ongoing in our laboratories. Biomass, with a predominately red color, demonstrating simultaneous removal of ammonium and nitrite under autotrophic and anoxic conditions, which is characteristic of anaerobic ammonium-oxidizing planctomycetes, was enriched and maintained for an extended period on a polyester nonwoven carrier. To investigate the bacterial composition of the mature biofilm community, 16S rDNA sequences were amplified by PCR and comparative analyses using DNA databases were conducted. Only one sequence had a notable similarity (92.2%) to that of the first discovered anaerobic ammonium-oxidizing planctomycete and lesser, yet significant, similarities to the 16S rDNA sequences of other recently reported anaerobic ammonium-oxidizing strains. The newly discovered strain (designated KSU-1) reported here was dominant among detectable members of the biofilm community. By fluorescence imaging, KSU-1 was shown to form spherical clusters wrapped in a thin layer of Zoogloea sp. Possible interactions and interdependencies of these two species are discussed with regard to the putative unculturability of the anaerobic ammonium-oxidizing planctomycetes.     

Flexible microelectronics: New application for thin‐film transistors in fingerprint sensors

Abstract— Thin‐film transistors (TFTs) are field‐effect transistors that can be used to create large‐scale‐integrated (LSI) circuits. The combination of high‐performance TFTs and transfer technology of the TFTs has the potential to foster the rise of a new flexible microelectronics industry. This paper discusses the current status of flexible microelectronics, using a TFT fingerprint sensor (FPS) as an example. Technology used in active‐matrix displays can easily be applied to the TFT FPS. TFT technology should not be confined to the display industry; its use should be expanded into the semiconductor industry. With the result presented in this paper, we declare a new era of flexible microelectronics open.     

A pneumatically actuated full in-channel microvalve with MOSFET-like function in fluid channel networks

A pneumatically actuated silicon microvalve applicable to integrated microfluidic systems is presented. All the ports of this microvalve are in-channel, and connectable to any surface fluid channels in microfluidic systems. This microvalve controls fluid flow by means of the controlled gap between glass and silicon diaphragm actuated by a control pressure. In addition, the diaphragm is also deformed by the outlet pressure of the microvalve. Due to the feature, this microvalve shows saturation of flow rate like MOSFETs operated at saturation region. The fabricated microvalve device was evaluated focusing on analogous relationship between MOSFET and the microvalve. Fluids such as air and DI-water were well controlled by the control pressure. Fluid starts to flow in the microvalve when the control pressure exceeds its "threshold pressure." Hysteresis due to sticking of diaphragm was not observed in the characteristics. Air flow rate of the microvalve was gradually saturated with the increasing of the outlet pressure as expected. Through the evaluation, analogous relationship between this microvalve and MOSFET has been experimentally demonstrated.     

Elimination of artifacts in MRCP: technical consideration

Artifacts of MR cholangiopancreatography (MRCP) include fluid-filled gastrointestinal tracts, respiratory motion artifacts, spasm of Oddi's sphincter, vascular compression of bile ducts, overlapping of various anatomical structures and bright signal of surrounding fatty tissue. In this article, various technical considerations to eliminate these artifacts were described for the better imaging analysis of MRCP. The use of high-concentration ferric ammonium citrate (Ferriseltz) is recommended to reduce bright signal of fluid-filled gastrointestinal tracts. In case of long breathhold sequences, O2-inhalation study is useful to eliminate respiratory motion artifacts. Careful attention should be paid to the spasm of Oddi's sphincter and the vascular compression of bile ducts to avoid erroneous interpretation of MRCP findings.     

A subcloned human esophageal squamous cell carcinoma cell line with low thrombomodulin expression showed increased invasiveness compared with a high thrombomodulin-expressing clone--thrombomodulin as a possible candidate for an adhesion molecule of squamous cell carcinoma

Inside-out vesicles of plasma membranes prepared from a plant source were used as models to investigate effects of centrifugal forces on separations of early and late endosome populations by aqueous two-phase partition. Endosome subpopulations were resolved readily by preparative free-flow electrophoresis where acidification of the interiors of late endosomes occurred upon addition of ATP to activate a proton translocating ATPase. The resultant increased diffusion potential provided for a surface difference between late and early endosomes to permit electrophoretic separation. With the plant membranes, unincubated inside-out plasma membrane vesicles modeled early endosomes, whereas inside-out vesicles incubated with 1 mM ATP modeled late endosomes. A latent, 2,4-dichlorophenoxyacetic acid (2,4-D)-(auxin)-stimulated NADH:protein disulfide reductase measured spectrophotometrically was used as an enzymatic marker for both populations of inside-out vesicles. Phase partition behavior of each population was quantitated using total protein as the parameter.     

Specific isoprenyl group linked to transducin gamma-subunit is a determinant of its unique signaling properties among G-proteins

Among 11 subtypes of heterotrimeric G-protein gamma-subunit, gamma1 (rod), gamma8 (cone) and gamma11 are modified with farnesyl while the others are modified with geranylgeranyl at the C-terminus. To understand the role of specific isoprenylation (farnesylation) of retinal transducin, we examined how and to what extent the type of isoprenyl group affects transducin-beta gamma (beta1 gamma1) functions such as interactions with membranes, Galpha/receptor, and effectors. To this end, the C-terminal farnesylation signal sequence (CVIS) of gamma1 was replaced by a geranylgeranylation signal (CVIL), and the resultant mutant (S74L) or wild-type (WT) gamma1 was coexpressed with beta1 in the baculovirus-Tn5 insect cell system. Both gamma1WT and gamma1S74L expressed as a beta gamma complex were mixtures modified with farnesyl and geranylgeranyl groups. The ratio of farnesyl to geranylgeranyl in preparations of beta1 gamma1WT and beta1 gamma1S74L purified from the Tn5 cell membrane fraction was about 1:2 and 1:6, respectively. These two forms of recombinant beta1 gamma1 and retinal beta1 gamma1 were different in their abilities to associate with rod outer segment membranes with the following rank order: beta1 gamma1S74L > beta1 gamma1WT > retinal beta1 gamma1. Functionally, beta1 gamma1S74L was the most potent to promote pertussis toxin-catalyzed ADP ribosylation of transducin-alpha (Talpha), to stimulate metarhodopsin II-catalyzed GTPgammaS-binding reaction to Talpha and to modulate adenylyl cyclase and phospholipase C activities. All of the beta1 gamma1 functions absolutely required the isoprenylation of the gamma-subunit. As for the interaction with Goalpha and adenylyl cyclase, predominantly geranylgeranylated beta1 gamma1S74L was less effective than geranylgeranylated beta1 gamma2 purified from bovine brain. These results demonstrate that the properties of Gbeta gamma are strongly affected by the type of functionally indispensable isoprenylation in addition to the amino acid sequence of Ggamma. The relative contribution of the two factors depends on proteins with which Gbeta gamma interacts.     

Graft copolymerization of glass fiber and its application

Modified glass fibers, containing unsaturated hydrocarbon surface groups, were prepared by a hydrothermal treatment, with allylglycidylether in excess as reagent. Graft polymerization of the treated glass fiber with styrene and methylmethacrylate was carried out in sealed tubes, under nitrogen, using benzoyl peroxide (BPO) and cumene hydroperoxide (CHPO) as initiators. When BPO was used as the initiator, the grafting efficiency was extremely low, but the graft copolymerization behavior was similar to that of usual organic polymers. With CHPO, both grafting ratio and grafting efficiency were very high. Various properties of composite materials containing grafted glass cloth were studied. Flexural strength, flexural modulus, and interlaminar shear strength increased proportionally to the increase of the grafting ratio; the same values were decreased only in a small extent after the boiling test.