Cathodoluminescence study of AlGaAs/GaAs multilayers grown on ridge-type triangles on GaAs (111)A substrates

We have studied the cathodoluminescence of AlxGa1-xAs/GaAs multilayers grown on ridge-type triangles by molecular beam epitaxy. The compositional variation of Al, as well as the distribution of impurity and/or defect, was revealed by variations in the cathodoluminescence spectra and images. The Al composition in an AlxGa1-xAs layer was highest in the (111)A facet and decreased in the order (100), (411)A, (111)-delta and (110) facets. On the other hand, the carbon concentration was highest in the (411)A facet and decreased in the order (111)A, (111)-delta, (100) and (110) facets. It should be noted that the (111)-delta facet has a significant effect on the redistribution of Al. Although our ridge-type triangles are rather large for the quantum structures, these data have elucidated the self-organization mechanism of the AlxGa1-xAs/GaAs system and have yielded information on the design of quantum structures. We conclude that cathodoluminescence observation is a powerful tool for studying the compositional variation or band structure of three-dimensional microscale or nanoscale construction.     

Threshold-voltage balance for minimum supply operation [LV CMOS chips]

The difference between the threshold voltages V/sub t/ of pMOS and nMOS transistors is a critical issue in the low-voltage operation of CMOS circuits. The pMOS/nMOS V/sub t/ balancing profit is analyzed in terms of subthreshold leakage current and the performance of CMOS LSIs and the minimum supply voltage of logic circuits. Matching the pMOS/nMOS V/sub t/ improves LSI performance and reduces the lowest supply voltage by 0.15 V. We propose a new concept of body bias management that uses forward biasing, fluctuation compensating, and V/sub t/ matching technologies to resolve the issue.     

Ionic‐Liquid Gating of InAs Nanowire‐Based Field‐Effect Transistors

Here, the operation of a field‐effect transistor based on a single InAs nanowire gated by an ionic liquid is reported. Liquid gating yields very efficient carrier modulation with a transconductance value 30 times larger than standard back gating with the SiO₂/Si₊₊ substrate. Thanks to this wide modulation, the controlled evolution from semiconductor to metallic‐like behavior in the nanowire is shown. This work provides the first systematic study of ionic‐liquid gating in electronic devices based on individual III–V semiconductor nanowires: this architecture opens the way to a wide range of fundamental and applied studies from the phase transitions to bioelectronics.     

Development of 170 GHz/500 kW gyrotron

A development of 170GHz/500kW level gyrotron was carried out as R&D work of ITER. The oscillation mode is TE_31,8. In a short pulse experiment, the maximum power of 750kW was achieved at 85kV/40A. The efficiency was 22%. In the depressed collector operation, 500kW/36%/50ms was obtained. The maximum efficiency of 40% was obtained at P_RF=470kW whereas the power decrease by the electron trapping was observed. Pulse extension was done up to 10s at P_RF=170kW with the depressed collector operation. The power was limited by the temperature increase of the output window.     

GPC Profile Change of Potato Starch with Extrusion Processing

Native potato starch (moisture content 15%) was treated by twin screw extruder under four operating conditions with varying barrel temperatures (110°C–230°C). These modified starch samples were compared to native and drum-dried starch. Starch sample solution for gel chromatography was prepared by the three methods (acidic, alkaline, and neutral methods). They were subjected to gel chromatography on Toyopearl HW-75, and some difference was found among the three gel chromatographic patterns obtained from the same starch solution. This discrepancy among GPC patterns suggests formation of some types of anhydro-bonds between chains of amylopectin and or amylose in the extrusion process. Elevating barrel temperature increases degree of depolymerization. The size of fragments formed with the treatment is bigger than that of oligosaccharides but smaller than that of amylose.     

InxGa1−xAs ohmic contacts to n-type GaAs with a tungsten nitride barrier

Significant reduction of the contact resistance of In_0.7Ga_0.3As/Ni/W contacts (which were previously developed by sputtering in our laboratory) was achieved by depositing a W₂N barrier layer between the Ni layer and W layer. The In_0.7Ga_0.3 As/Ni/W₂N/W contact prepared by the radio-frequency sputtering technique showed the lowest contact resistance of 0.2 Ωmm after annealing at 550°C for 10 s. This contact also provided a smooth surface, good reproducibility, and excellent thermal stability at 400°C. The polycrystalline W₂N layer was found to suppress the In diffusion to the contact surface, leading to improvement of the surface morphology and an increase in the total area of the In_xGa−As between metal and the GaAs substrate. These improvements are believed to reduce the contact resistance.     

Three replacement models with two kinds of damage

This paper proposes three replacement policies for a modified cumulative damage model. An item receives shocks and suffers two kinds of damage: one is produced by shocks and the other increases with time at constant rate a. It fails only when the total damage exceeds a failure level K at some shock and is replaced before failure at time T, at shock N, or at damage k. The expected cost rates of three replacement policies are obtained. When shocks occur in a Poisson process, optimal T^*, N^* and k^* which minimize them are computed numerically. Finally, two extended cases where a is a function of time and K is a random variable are also considered.     

Numerical Analysis of the Boundary Scattering Effect on Transport Properties in Bi-Sb Nanowires

In this study, we have numerically analyzed the transport properties of Bi-Sb nanowires, taking into account wire boundary scattering. Wire boundary scattering slightly decreased the Seebeck coefficient of Bi-Sb nanowires. This effect is due to the observation that boundary scattering and the mobility ratio of L-point electrons to T-point holes in the nanowires are smaller than those in bulk Bi-Sb because the wire boundary scattering suppresses the mobilities of L-point electrons and heavy holes. The largest Seebeck coefficient for all wire diameters was obtained when the Sb concentration was 5 at.%. The effective mass approached zero near 5 at.% Sb, and the small effective mass led to a large subband shift in each band. Thus, a small effective mass enhances the quantum effect at a fixed wire diameter, even if wire boundary scattering is taken into account.     

A Quaternary van der Waals Ferromagnetic Semiconductor AgVP2Se6

The recent realization of 2D magnetism in van der Waals (vdWs) magnets holds promise for future information technology. However, the vdWs semiconducting ferromagnets, which remain rare, are especially important in developing 2D magnetic devices with new functionalities due to the possibility of simultaneous control of the carrier charge and spin. Metal thiophosphate (MTP), a multifunctional vdWs material system that combines the sought‐after properties of complex oxides, is a promising vdWs magnet system. Here, single crystals of a novel vdWs ferromagnetic semiconductor MTP AgVP₂Se₆ with a room‐temperature resistivity of 1 Ω m are successfully synthesized. Due to the nature of vdWs bonding along the c‐axis, the magnetic properties of the few‐layer AgVP₂Se₆ with different thicknesses are characterized on the exfoliated samples. The AgVP₂Se₆ flakes exhibit significant thickness‐dependent magnetic properties, and a rectangular hysteresis loop with a large coercive field of 750 Oe at 2 K and an undiminished Curie temperature of 19 K are observed in the 6.7 nm AgVP₂Se₆ flake. The discovered vdWs ferromagnet AgVP₂Se₆ with semiconducting behavior will provide alternative platforms for exploring 2D magnetism and potential applications in spintronic devices.