Analysis of Reusability using ‘Marginal Reuse Rate’

While reuse is an effective lifecycle option in terms of reduction of environmental loads and value of reutilization, reuse has inherent difficulties. Our naive question is why component reuse of home appliances seems impossible while that of photocopiers succeeded. This paper clarifies an essential factor for successful reuse; that is, the balance between supply and demand of reusables, and proposes an index named ‘marginal reuse rate,’ which indicates upper limit of reusability. By using this index, reusability of several products is analyzed. The marginal reuse rate indicates that design of lifecycle, in addition to product design, is indispensable for successful reuse.     

Morphology and preferred orientation of Y2O3 film prepared by high-speed laser CVD

Yttria (Y₂O₃) films were prepared at high deposition rates of up to 83 nm/s (300 μm/h) by laser chemical vapor deposition (LCVD) using an Y(dpm)₃ precursor. The effects of deposition conditions, mainly total gas pressure and laser power, on morphology, deposition rate and preferred orientation were studied. Plasma was produced around the substrate over a critical laser power resulting in significant increases in deposition temperature and deposition rate. The high deposition rate (300 μm/h) by LCVD was about 100 to 1000 times as high as those by conventional CVD. The morphology of Y₂O₃ films changed from faceted and columnar structures with high (400) orientation to a columnar structure with high (440) orientation, and finally to a cone-like structure with moderate (440) orientation with increasing total gas pressure (P_tot).     

A New Process to Make a Porous PTFE Structure from Aqueous PTFE Dispersion with the Help of Hydrogel

A novel method to make a porous material having relatively large cell diameter (200–300 m), which consisted of mainly poly(tetrafluoroethylene) (PTFE), was developed from aqueous PTFE dispersion by using the characteristics of hydrogel with the addition of carbon nanofiber (CNF). The porous material was produced as follows: firstly, an aqueous agar gel containing PTFE and CNF was prepared; secondly, the gel was freeze-dried; thirdly, the dried gel was heat-treated at 400°C where the agar was almost decomposed and PTFE became molten. The porous material showed electric conductivity (about 50 ), high porosity (about 96 vol%), and relatively uniform cell structures without shrinkage during freeze drying and heat treatment. While the method without CNF resulted in large shrinkage during heat treatment, meaning that CNF prevented the shrinkage. It was explained by the idea that the existence of rigid CNF, which was dispersed in the cell wall, prohibited the shrinkage of PTFE during heat treatment. It was unexpectedly found by SEM analysis that the porous materials had another macro-porous structure inside the cell wall, suggesting that the developed materials had a double porous structure.     

Radiation grafting of α,β,β-trifluoroethylenesulfonyl fluoride onto low-density polyethylene film by simultaneous irradiation method. I. Kinetic study of simultaneous-irradiation grafting

α,β,β-Trifluoroethylenesulfonyl fluoride (TFESF) was grafted onto polyethylene (PE) film by a simultaneous-irradiation method. The influences of the grafting conditions were analyzed kinetically. The dependencies of the grafting rate on the dose rates and monomer concentrations ranging from 10 to 75% were found to be of 1 and 0 order, respectively. The overall activation energy for the graft polymerization was 2.05 × 10⁴ J/mol. The grafting rate was found to be independent of the film thicknesses ranging from 25 to 100 μm.     

Effect of green compact structure on the sintering of alumina

The effect of particle agglomeration on sintering has been studied by slipcasting suspensions with pH values ranging from 2 to 11. The rate of densification has been found to depend on the degree of agglomeration. Complete dispersion of alumina primary particles has not been attained through adjustment of pH of suspensions, and agglomerates also remained in the best-dispersed suspension. Elimination of the agglomerates by sedimentation lowered the densification temperature of slip-cast compacts. The grain size-density curve is a function of temperature. High-density and small-grained sintered bodies were obtained by low-temperature long-time firing.     

Fast computation of computer-generated hologram using Xeon Phi coprocessor

We report fast computation of computer-generated holograms (CGHs) using Xeon Phi coprocessors, which have massively x86-based processors on one chip, recently released by Intel. CGHs can generate arbitrary light wavefronts, and therefore, are promising technology for many applications: for example, three-dimensional displays, diffractive optical elements, and the generation of arbitrary beams. CGHs incur enormous computational cost. In this paper, we describe the implementations of several CGH generating algorithms on the Xeon Phi, and the comparisons in terms of the performance and the ease of programming between the Xeon Phi, a CPU and graphics processing unit (GPU).     

Influence of Metal Ions on the Order-Disorder Transition Temperature of the Ba-M-O (M: La, Y, In, or Ga) System

Preparation of BaLa₂O₄, B_a3,Y₄O₉, B_a,In₂O₅, and Ba₃Ga₂O₆ powders and their sintering were investigated in Ar or air. These sintered bodies with perovskite-related structure were synthesized by reaction sintering, using mixed powders in the atomic ratios of Ba/La = 1, Ba/Y = 0.75, Ba/In = 1, and Ba/Ga = 1.5. The order-disorder transition temperatures of the BaLa₂O₄, Ba₃Y₄O₉, Ba₂In₂O₅, and Ba₃Ga₂O₆ sintered bodies were 270°, 350°, 880°, and 123O^oC, respectively. It was found that the temperatures were influenced by the ionic radius of cations in B sites, and the transition temperatures decreased with increasing ionic radius.     

Orientation in uniaxially drawn polystyrene plasticized by CO2 sorption

Uniaxial drawing experiments of the polystyrene films plasticized by a sorption of compressed CO₂ gas at pressures up to about 18 MPa were carried out with strain rates ε of 0.0290 and 0.0079 s^?1. The drawing was performed successfully with draw ratio λ up to 4 at the temperatures of 308.15, 318.15, 328.15, and 338.15 K. The Hermans orientation function f of the drawn samples was determined from the dichroic ratio measured by an infrared spectrophotmeter. While f value increases with increasing ε or λ, it decreases with increasing CO₂ pressure or temperature. © 1995 John Wiley & Sons, Inc.     

Mechanical behaviour of a combined joint composed of mechanical fastening and adhesive bonding

A study has been made of ‘combined’ joints consisting of mechanical fastening and adhesive bonding between rigid adherends. The mechanical characteristics of such ‘hybrid’ butt and lap shear joints have been derived by theoretical analysis. Results from experimental tests in combined joints giver reasonable agreement with the theoretical equations relating joint load to deformation.     

Polyacrylonitrile/Nylon 6 Blends: Preparation and Characterization

Summary: Polyacrylonitrile (PAN) particles with micro‐size ranges (0.15–2 μm) were prepared by emulsion and dispersion polymerizationa and in supercritical carbon dioxide media. The PAN particles were blended with Nylon 6 (PA6) at 220 °C by using a miniature mixer; it was found that melt‐mixing was possible for PAN‐rich compositions as high as 70 wt.‐%. Blends were characterized by scanning electron microscopy, IR, viscosity measurements, differential scanning calorimetry, and dynamic mechanical thermal analysis (DMTA). The size and shape of original PAN particles were retained in PAN/PA6 blends. The useful range to blend PAN particles size was less than 1 μm in terms of shape retention of the PAN particles in blends. Blends with 40 wt.‐% PAN content were found to be melt‐processable. The elastic modulus was higher for PAN/PA6 blends than pure PA6.

SEM photograph of PAN‐SC/PA6 blend with a 40/60 weight ratio.