On the accuracy and efficiency of substrate current calculationsfor sub-μm n-MOSFET's

The accuracy and efficiency of the self-consistent (regarding the electric field) Monte Carlo model, nonself-consistent Monte Carlo model, and the soft-threshold lucky electron model (LEM) for the calculation of substrate currents in deep sub-μm n-MOSFET's are investigated. While the two Monte Carlo models are in good agreement with the experiment, the simpler LEM model still gives reasonable results even for a 0.16 μm n-MOSFET. On the other hand, huge differences in the CPU time consumption are found and the LEM is about four orders of magnitude faster than the self-consistent Monte Carlo simulations. The nonself-consistent calculations are only one order of magnitude slower than the LEM. The good agreement with the experiment is obtained without considering the so-called surface impact ionization or any fitting of parameters on the device level     

A far-infrared spectroscopic study of low temperature soft phonon mode in Tris-Sarcosine Calcium Chloride(TSCC)

Temperature dependences of the soft phonon frequency and the damping constant in Tris-Sarcosine Calcium Chloride (TSCC) single crystal have been investigated between 5K and 100K by using a Fourier-transform far-infrared spectrometer. It has been observed that the soft phonon frequency decreases gradually and the damping constant increases as the transition temperature is approached from below The damping constant varies from 7cm^-1 a 90K to less than 0.5cm^-1 at 5K. It has been found that the damping constant is approximately proportional to temperature below about 60K.     

An empirical approach for structure-based prediction of carbohydrate-binding sites on proteins

A computer program system was developed to predict carbohydrate-bindingsites on three-dimensional (3D) protein structures. The programssearch for binding sites by referring to the empirical rulesderived from the known 3D structures of carbohydrate–proteincomplexes. A total of 80 non-redundant carbohydrate–proteincomplex structures were selected from the Protein Data Bankfor the empirical rule construction. The performance of theprediction system was tested on 50 known complex structuresto determine whether the system could detect the known bindingsites. The known monosaccharide-binding sites were detectedamong the best three predictions in 59% of the cases, whichcovered 69% of the polysaccharide-binding sites in the targetproteins, when the performance was evaluated by the overlapbetween residue patches of predicted and known binding sites. Received April 24, 2003; revised June 2, 2003; accepted June 10, 2003.     

Change in bacterial community during biodegradation of aniline

A modification of the standard electrodiagnostic test was developed in an effort to provide a more sensitive electrodiagnostic evaluation in radial tunnel syndrome. Radial motor nerve latency recordings were obtained in 3 different forearm positions: neutral, passive supination, and passive pronation. The maximal difference in these recordings, the differential latency, in 25 patients with radial tunnel syndrome of greater than 6 months duration (test group) was compared with those in 25 asymptomatic volunteers (control group). Differential latency recordings were obtained in all patients in the test group before and after surgery. Radial nerves that were compressed demonstrated a significantly greater differential latency (0.44+/-0.12 ms) versus controls (0.12+/-0.008 ms). Following radial nerve decompression, differential motor latencies in the test group decreased below control values, demonstrating a resolution of the provoked electrical response with a postoperative differential latency of 0.07+/-0.05 ms. Our results demonstrate the differential motor latency of the radial nerve to be a sensitive electrodiagnostic tool in patients with radial tunnel syndrome. A differential latency of > or =0.30 ms was considered indicative of radial tunnel syndrome.     

Mutagenicity and DNA-damaging activity of decomposed products of food colours under UV irradiation

Five synthetic food colours Food Red Nos 3, 40 and 102 and Food Blue Nos 1 and 2, and their UV irradiated products were tested for mutagenic activity by means of the Ames test using Salmonella typhimurium strains TA98 and TA100. Food colours were irradiated with UV light for 14 days. Food Red Nos 3, 40 and 102 and Food Blue No. 1 were non-mutagenic before and after irradiation. UV irradiated products of Food Blue No. 2 were mutagenic in TA98 with or without S-9 mix. The mutagenic activity increased with increasing irradiation period, reached maximum potency on day 6, and then decreased. Moreover, Food Blue No. 2 showed DNA-damaging activity after 14 days of irradiation in rec-assay using Bacillus subtilis strains H17 and M45. The capillary electrophoresis was applied for the analysis of UV irradiated products of Food Blue No. 2. The original peak of Food Blue No. 2 was decomposed into seven peaks after UV irradiation.     

Mechanisms responsible for resistance of sublines derived from leukemia cell lines to an antitumor agent 9-beta-D-arabinofuranosyl-2-fluoroadenine

An agent 9-beta-D-arabinofuranosyl-2-fluoroadenine (2-F-Ara-A) is a main metabolite of fludarabine, a fluorinated purine analogue with antitumor activity in lymphoproliferative malignancies. In this study, the mechanism responsible for the resistance of cancer cells to fludarabine was examined using the 2-F-Ara-A-resistant sublines JOK-1/F-Ara-A and L1210/F-Ara-A from a human hairy leukemic cell line (JOK-1) and a mouse leukemic cell line (L1210) respectively, which were established by continuous treatment of the parental cell lines with 2-F-AraA. JOK-1/F-Ara-A and L1210/F-Ara-A cells were more than 55 and 29 times more resistant to 2-F-Ara-A than were their parent cell lines, and showed a high cross-resistance to 1-beta-D-arabinofuranosylcytosine but not to doxorubicin or vincristine. These resistant sublines intracellularly accumulated almost the same amount of 2-F-Ara-A as did their parent cell lines. However, the amount of 2-F-Ara-ATP, a cytotoxic metabolite of 2-F-Ara-A, decreased by 2.6% (JOK-1/F-Ara-A C3), 6% (L1210/F-Ara-A C1) and 3.7% (L1210/F-Ara-A C7) relative to the levels in the parent cell lines. Enzymatically, these resistant cells hardly activated deoxycytidine (dCyd) and 2-F-Ara-A. In addition, the abilities to phosphorylate deoxyadenosine and deoxyguanosine were also decreased in the resistant cells in comparison with the parent cells. These findings suggest that the deficiency in activity of dCyd kinase may contribute to the resistance of 2-F-Ara-A.     

Some characteristics of a cellular receptor for virulent infectious bursal disease virus by using flow cytometry

A flow cytometric virus binding assay that directly visualizes the binding of infectious bursal disease virus (IBDV) to its target cells was established. The chicken B lymphoblastoid cell line, LSCC-BK3, which is permissive for IBDV infection, bound high levels of the virus. Another B lymphoblastoid cell line, LSCC-1104-B1, bound low levels of the virus, although it was nonpermissive. No virus binding was detected in nonpermissive T lymphoblastoid cell lines. In the binding assay to heterogeneous cell populations of chicken lymphocytes, IBDV (a highly virulent OKYM strain) bound to 94% cells in the lymphocytes prepared from the bursa of Fabricius, 37% cells in those prepared from the spleen, 3% cells in those prepared from the thymus, and 21% cells in those prepared from the blood. Most of the cells, which bound the virus, were surface immunoglobulin M (SIgM)-positive, but a small number of them were SIgM-negative. Additionally, the binding of IBDV to the LSCC-BK3 cells was affected by treatment of the cells with proteases and N-glycosylation inhibitors. These findings may indicate that the IBDV host range is mainly controlled by the presence of a virus receptor composed of N-glycosylated protein associated with the subtle differentiation stage of B-lymphocytes represented mostly by SIgM-bearing cells.     

Titania NOx sensors for exhaust monitoring

Oxide semiconductors have been examined to develop NO_x sensors for exhaust monitoring. Titania doped with trivalent elements, such as Al³⁺, Sc³⁺, Ga³⁺ or In³⁺, has a good sensitivity and selectivity to NO between 450 and 550 °C, and shows rapid response. A sensor probe for monitoring exhaust NO_x has been fabricated. Many kinds of interference gases, such as C₃H₆, CO and SO₂, have been found to have only a slight influence on the sensor response to NO. The influence of O₂ and H₂O is also negligible, except for the cases of 0% H₂O and fuel-rich conditions. In accordance with these results, the sensor probe operates satisfactority in the exhaust gas of various combustion conditions without interference from the various kinds of gas species in the exhaust gases.     

Effects of computers on Japanese schools

In this paper I consider how the computer can or should be accepted in Japanese schools. The concept of teaching in Japan stresses learning from a long-term perspective. Whereas in the instructional technology, on which the CAI or the Tutoring System depends, step-by-step attainments in relatively short time are emphasized. The former is reluctant in using the computer, but both share the Platonic perspective which are goal-oriented. However, The Socratic teacher, who intends to activate students' innate disposition to be better, would find another way of teaching and use of the computer.     

Numerical investigation of zoomable holographic projection without a zoom lens

Holographic projection is for laser displays and has the merits of being aberration free, producing high‐contrast images, having the ability of color reconstruction with one spatial light modulator, and so on. In this paper, we propose a zoomable holographic projection without using a zoom lens and verify the proposed method by using numerical simulation. Although such a system can be readily realized to use the features of holography, which is capable of recording a large image exceeding the hologram size, the required calculation is very time consuming. For acceleration, we used shifted Fresnel diffraction for setting different sampling rates on a hologram and projected image. The proposed method can project any zoom‐in and zoom‐out image between zeroth‐order and first‐order lights, and the processing time and required memory for the zoom are constant.