High-performance C60 and picene thin film field-effect transistors with conducting polymer electrodes in bottom contact structure

C₆₀ and picene thin film field-effect transistors (FETs) in bottom contact structure have been fabricated with poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT:PSS) electrodes for a realization of mechanical flexible organic FETs. The C₆₀ thin film FETs showed n-channel enhancement-type characteristics with the field-effect mobility μ value of 0.41 cm² V^?1 s^?1, while the picene thin film FET showed p-channel enhancement-type characteristics with the μ of 0.61 cm² V^?1 s^?1. The μ values recorded for C₆₀ and picene thin film FETs are comparable to those for C₆₀ and picene thin film FETs with Au electrodes.     

Polysilicon thin-film transistors with channel length and widthcomparable to or smaller than the grain size of the thin film

Poly-Si thin-film transistors (TFTs) with channel dimensions (width W, and length L) comparable to or smaller than the grain size of the poly-Si film were fabricated and characterized. The grain size of the poly-Si film was enhanced by Si ion implantation followed by a low-temperature anneal and was typically 1 to 3 μm in diameter. A remarkable improvement was observed in the device characteristics as the channel dimensions decreased to W=L =2 μm. On the other hand, TFTs with submicrometer channel dimensions were characterized by an extremely abrupt switching in their I_D versus V_GS characteristics. The improvement was attributed to a reduction in the effect of the grain boundaries and to the effect of the device's floating body     

BEOL工艺统合Integration--low-k Dual/Damascene的形成

1简介 当前,从成膜方法来讲,ILD loW-k材料大致上分为两类:一类是以SiCOH为代表的CVD(化学气相淀积)膜,另一类是SOD(旋转涂层)膜,它包括有机的、无机的和SiCOH.     

Observation of polarization property in near-field optical imaging by a polarization-maintaining fiber probe

We fabricated an original near-field scanning optical microscopy (NSOM) fiber probe made of polarization-maintaining and attenuation-reducing (PANDA)-type polarization-maintaining optical fiber, and observed the polarization property of propagation light in a polymer optical waveguide. The distribution of the transmission coefficient in polarization angles through this NSOM probe showed that the linear polarization is maintained in the two crossing directions: the fast and slow axes. The polarization degree parallel to the slow axis decreases from 1000:1 to 2:1 by bending the fiber probe and the decrease is independent of the bending direction. Using this PANDA-type NSOM probe, we investigated the polarization property of periodic intensity modulation. It was found that the intensity modulation was observed clearly with the electric vector parallel to the radius direction of the waveguide, but was observed vaguely with the electric vector perpendicular to the radius direction.     

Low-profile helical array antenna fed from a radial waveguide

A low-profile array antenna composed of two-turn 4° pitch angle helices is designed for a frequency band of 11.7 GHz to 12.0 GHz. The feed wire of each helix is inserted into a radial waveguide through a small hole and excited by a traveling wave flowing in the transverse electromagnetic mode between the two parallel plates of the waveguide. The measured aperture efficiency shows a maximum value of 77% for a beam radiated in the normal direction and 69% for a 30° beam tilt     

Use of support vector regression and numerically predicted cloudiness to forecast power output of a photovoltaic power plant in Kitakyushu,Japan

The development of a methodology to forecast accurately the power produced by photovoltaic systems can be an important tool for the dissemination and integration of such systems on the public electricity grids. Thus, the objective of this study was to forecast the power production of a 1‐MW photovoltaic power plant in Kitakyushu, Japan, using a new methodology based on support vector machines and on the use of several numerically predicted weather variables, including cloudiness. Hourly forecasts of the power produced for 1 year were carried out. Moreover, the effect of the use of numerically predicted cloudiness on the quality of the forecasts was also investigated. The forecasts of power production obtained with the proposed methodology had a root mean square error of 0.0948 MW h and a mean absolute error of 0.058 MW h. It was also found that the forecast and measured values of power production had a good level of correlation varying from 0.8 to 0.88 according to the season of the year. Finally, the use of numerically predicted cloudiness had an important role in the accuracy of the forecasts, and when cloudiness was not used, the root mean square error of the forecasts increased more than 32%, and the mean absolute error increased more than 42%. Copyright © 2011 John Wiley & Sons, Ltd.     

Development of a 385–500 GHz Sideband-Separating Balanced SIS Mixer

A submillimeter (385–500 GHz) low-noise sideband-separating balanced SIS (Superconductor Insulator Superconductor) mixer (Balanced 2SB mixer) with high IRR (Image Rejection Ratio) has been successfully developed, whose SSB (Single SideBand) noise temperature is ～ 200 K (10hf/k) with an image rejection ratio of ≥?～10 dB. Balanced mixers have become a promising technology which would break through the limitation especially in terahertz receivers and heterodyne arrays. However, though there are examples in microwave with relatively worse noise performance, submillimeter and terahertz balanced mixers have rarely been developed in spite of their astronomical importance. The developed balanced 2SB mixer is not only the first one demonstrated at submillimeter frequency range, but also has very low noise, high IRR, wide detectable frequencies (385–500 GHz), and a flat IF output spectrum. The balanced 2SB mixer is composed of three RF hybrids, four DSB (Double SideBand) mixers, two 180° IF hybrids, and an IF quadrature hybrid. Several important performance indicators such as noise temperature, IRR, required LO (Local Oscillator) power, and IF spectra were measured. The measured LO power required for the balanced 2SB mixer was typically ~ 14 dB less than that of the single-ended mixers.     

Design of zero-phase recursive 2-D variable filters with quadrantal symmetries

The digital filters with adjustable frequency-domain characteristics are called variable filters. Variable filters are useful in the applications where the filter characteristics are needed to be changeable during the course of signal processing. In such cases, if the existing traditional constant filter design techniques are applied to the design of new filters to satisfy the new desired characteristics when necessary, it will take a huge amount of design time. So it is desirable to have an efficient method which can fast obtain the new desired frequency-domain characteristics. Generally speaking, the frequency-domain characteristics of variable filters are determined by a set of spectral parameters such as cutoff frequency, transition bandwidth and passband width. Therefore, the characteristics of variable filters are the multi-dimensional (M-D) functions of such spectral parameters. This paper proposes an efficient technique which simplifies the difficult problem of designing a 2-D variable filter with quadrantally symmetric magnitude characteristics as the simple one that only needs the normal one-dimensional (1-D) constant digital filter designs and 1-D polynomial approximations. In applying such 2-D variable filters, only varying the part of 1-D polynomials can easily obtain new desired frequency-domain characteristics.     

Dynamic Power Integrity Control of ATE for Eliminating Overkills and Underkills in Device Testing

This paper proposes a power integrity control technique for dynamically controlling power supply voltage fluctuations for a device under test (DUT), and demonstrates its effectiveness for eliminating the overkills/underkills due to the difference of power supply impedance between an automatic test equipment (ATE) and a practical operating environment of the DUT. The proposed method injects compensation currents into the power supply nodes on the ATE system in a feed-forward manner such that the ATE power supply waveform matches with the one on the customer’s operating environment of the DUT. A method for calculating the compensation current is also described. Experimental results show that the proposed method can emulate the power supply voltage waveform under a customer’s operating condition and eliminate 95 % of overkills/underkills in the maximum operating frequency testing with 105 real silicon devices. Limitations and applications of the proposed method are also discussed.