Switching characteristics of vacuum gap switch employing UV‐laser triggering

The switching time and arc‐ignition probability of a sustained main discharge in a laser trigger vacuum gap were measured. The third harmonic beam of an Nd:YAG pulse laser (wavelength 355 nm, energy 5 mJ/pulse, power density 4 × 10⁷ W/cm²) was used to trigger the gap. The main electrodes 85 mm in diameter were made of oxygen‐free copper. The gap length was 1.6 mm and the experimental chamber was evacuated to about 1.3 × 10⁴ Pa by a turbomolecular pump. The UV beam from the laser was focused at normal incidence onto the grounded cathode. The switching time decreased and the arc‐ignition probability increased with increasing applied voltage. The switching time was 326 ns at 15 kV with a circuit inductance of 107 μH. Its jitter was 24.8 ns. The advantageous results obtained with the UV beam are compared to the previously reported data on triggered vacuum gaps. © 2000 Scripta Technica, Electr Eng Jpn, 132(3): 8–13, 2000     

Automated X‐ray inspection method for fillet‐less mounted chip components

Chip components mounted on the printed circuit board are rapidly being miniaturized. Furthermore, the fillet‐less chip soldering technique, which does not use a solder fillet, is widely used in portable products such as mobile phones. However, there is no method to inspect the soldering of fillet‐less chip mounting. In this paper, we propose an automated X‐ray inspection technique for fillet‐less chip mounting. It extracts three inspection parameters from the X‐ray image. In the experiments, we evaluate the repeatability and inspecting ability of the technique and confirm that sufficient information for failure detection is obtained. An automated X‐ray inspection system using this technique is now in operation at some factories, so in conclusion our automated method would be useful in practice. Copyright © 2007 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Stochastic ellipsoid methods for robust control: Multiple updates and multiple cuts

Efficient randomized algorithms are developed for solving robust feasibility problems with multiple parameter-dependent convex constraints. Two complementary strategies are presented, both of which exploit the multiplicity to achieve fast convergence. One is the stochastic ellipsoid method with multiple updates. In each iteration of this algorithm, an ellipsoid which describes a candidate of the solution set is updated many times via the multiple constraints with one random sample, while at most one update is allowed in the original method. The other is the stochastic ellipsoid method with multiple cuts. Here, a new update rule is presented to construct a smaller ellipsoid directly via multiple subgradients given by the constraints. A quantitative analysis of the volume of the ellipsoid is also provided, which guarantees the advantage of the proposed algorithm over the original one. The above features lead to a reduction of the total number of random samples necessary for convergence, which is extensively demonstrated through numerical examples.     

Study on estimating electric potential in space between parallel electrodes

We have been studying on estimating distribution of permittivity between measurement electrodes using capacitance and electric potential. Two arc electrodes were separated by long distance and there electrodes were surrounded by additional electrodes respectively. In past research work, we carried out numerical electric analysis for calculating the capacitance and electric potential using Finite Element Method (FEM) and compared with experimental and numerical results. The capacitance values were almost agreed with experimental and numerical results. However, the electric potential values were different between experimental and numerical results in conventional studies. In this paper, we proposed an equivalent circuit including the stray capacity and measurement method for capacitance, the electric potential in space between long distance electrodes was estimated.     

Experimental validation with field circuit by changing start voltage of salient pole synchronous motor

This paper reports on the experimental validation characteristics of a salient pole synchronous motor with the starting field circuit in contact. The starting characteristics were experimentally evaluated at voltages of 100%, 75%, and 50% using a 1.5 kVA salient pole synchronous motor. The signal for pulling into step was applied to the field circuit by using the control module for all test conditions. The results confirmed the proper pulling into step at 100% of voltage, and the results of the tests at 50% and 75% of voltage revealed that the pulling into step under these conditions becomes stable at the suitable slip condition.     

International comparison of standard systems for impulse current measurement

The impulse current test is an important test that is used for the evaluation of lightning protection equipment. The quality of the test greatly depends on the measuring system. Some countries already have their own standard measuring systems. Standard systems are under construction in Japan and Korea. According to the international standard on high‐voltage test techniques, a comparison test is needed to confirm the impulse parameters which have traceability or compatibility with the standard values. Different from intercomparison of impulse voltage measuring systems, Japan and Korea have not conducted an international comparison test for impulse current measuring systems. Now we have jointly conducted a comparison test for impulse current measurement. As a result, it was confirmed that the system of Japan is compatible with that of Korea, which is traceable to another foreign national standard. In this paper, the result of the comparison test between two countries is described. © 2011 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Temperature measurement at flip chip solder joint during electromigration test

Measuring the real temperature of a flip chip solder joint during an electromigration test has been a problem because of its small size and the local Joule heating due to a large applied current. A unique method that employs the electrical resistance change in the junction line between two solder joints was introduced to determine the temperature of the solder joint. The change in resistance was converted into temperature using a thermal coefficient of resistance of the junction line. The method accurately measured temperatures of the solder joint within 2 K until the solder joint resistance change ratio reached 100% due to growth of an electromigration void.     

Feasibility study on cellular network analysis with patterned cell culture microdevice

In order to realize cellular network analysis on a chip-based system, our group has been developing a patterned cell culture microdevice with pillars in an array for tapping cells into space surrounded by the pillars. The pillar structures has advantages to trap both adhesive and non-adhesive cells and to precisely control positions of cells and distances between cells for understanding effects of various cell patterns on functions of a cellular network such as cell proliferation, differentiation, and network formation. In this paper, HeLa cell cultivation with the patterned cell culture microdevice having a pillar array fabricated by dry film of thick negative photoresist SU-8 on a glass substrate was executed as a feasibility study on a cellular network analysis. The results revealed that the device performance was found to be enough to culture HeLa cells for more than 48 h. In addition, relative extensibility of blocks of multiple cells compared with single cells tapped on the device was observed. Thus, the patterned cell culture microdevice proposed here could be applicable to analysis of cellular functions.     

Development of a Simplified Calculation Tool for Voltage Drop Caused by Transformer Inrush in Distribution System

It is well known that a voltage drop due to inrush current at an energizing transformer may at times interrupt electrical equipment. Generally, the voltage drop is calculated by using a sophisticated tool such as EMTP, so that the transformer saturation phenomenon has been properly represented. However, it is not practical for distribution system engineers to calculate the voltage drop with transformer inrush by using EMTP, because there are many network access requests needing such calculations with many kinds of transformers. Therefore, in this paper, a simplified and easy‐to‐use calculation tool for voltage drops caused by transformer inrush in a distribution system is developed. In order to understand the voltage drop by inrush current during the planning stage, it is formulated by considering the transformer saturation/unsaturation periods in each winding type. The newly developed tool is based on versatile spreadsheet software such as Microsoft Excel ýO.R. It can be used with accuracy similar to that of EMTP. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 185(1): 36–47, 2013; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22394     

Powdered formulation of liquid oil terpenoid included in cyclodextrins for chemical stabilization and improved handling

Teprenone (Tp) is a widely used pharmaceutically active ingredient in terpene anti-ulcer agents. We investigated Tp and cyclodextrin (CD) complexes for the objective of forming stable Tp powders. Tp was combined with each CD at a molar ratio of 1:2, kneaded together while adding an appropriate amount of water, then dried under reduced pressure and lightly milled into a powder to produce a kneaded mixture (KM). Powder X-ray diffraction of KM containing Tp and β- and γ-CD revealed new diffraction peaks. On infrared spectroscopy, the peak near 1718 cm^?1 corresponding to the carbonyl group of Tp had shifted to around 1701 cm^?1. Solid-state NMR spectroscopy showed signs of inhibited molecular mobility of Tp, which is liquid at room temperature, confirming that Tp had formed complexes with β- and γ-CD. Photostability analysis of Tp showed improved stability in the order of γ-CD > β-CD ? α-CD.