Fracture toughness of short carbon fibre reinforced thermoplastic polyimide

The fracture toughness testing of short fibre reinforced thermoplastic materials were performed. Materials tested were the polyimide resin and also that reinforced with 20 wt% or 30 wt% short carbon fibre. For introducing the initial crack, the tapping method, the sliding method and the bridge indentation method were examined. Among them, the sliding method was found to be effective for every case. The fracture tests were conducted by the three-point bending test with several loading rates. Stable crack growth was observed for the neat material while unstable fracture occurred for the reinforced materials. The critical values of the stress intensity factor at crack initiation were greater for the reinforced materials than for the neat resin. The fracture toughness of the 30 wt% reinforced material was independent of loading rate while that of 20 wt% reinforced material increased with loading rate. In order to investigate the fracture mechanisms, fractographic observations were also performed.     

Survey of actual viewing conditions at home and appropriate luminance of LCD‐TV screens

Abstract— To understand actual viewing conditions at home is important for TV design. And the preferred luminance level of LCD TVs under actual viewing conditions is also important in order to obtain both good picture quality and low power consumption. The actual viewing conditions of households and the preferred luminance levels was investigated. In a field test of 83 households, the display luminance, screen illuminance, and viewing locations were measured on site. In laboratory experiments, young and elderly subjects adjusted the luminance of an LCD‐TV screen to their preferred levels under different screen illuminance levels, angular screen sizes, and average luminance levels (ALL) of the images. As a result, two equations, which represent the preferred luminance level of LCD‐TV screens corresponding to different viewing conditions for young and elderly subjects were obtained. When the ALL of the images was 25% and the screen illuminance and angular screen size were set at 100 lx and 20°, respectively, the preferred luminance was 1 60 cd/m² for the young subjects and 248 cd/m² for the elderly subjects. By using the setting of the preferred luminance of an LCD TV under actual viewing conditions, it is possible to conserve energy consumption.     

Cost effectiveness of reducing dioxin emissions from municipal solid waste incinerators in Japan

The main sources of dioxin emissions are municipal solid waste incinerators. The Japanese national government has set an emission standard for dioxins to reduce dioxin exposure levels. In this study, cost-effectiveness analyses are carried out regarding countermeasures that were recently taken and are being taken at municipal solid waste incinerators in Japan. Annual costs were estimated by telephone survey and model calculations. Annual decrease in the incidence of cancer was estimated in three steps. First, the annual decrease in the volume of dioxin emissions was estimated. Next, using a mathematical model, the annual decrease in human exposure was estimated. Finally, the annual decrease in the incidence of cancer was estimated by applying the cancer slope factor. When annual costs are divided by the annual number of life-years saved, cost per life-year saved (CPLYS) was obtained. CPLYS was estimated to be 7.9 million yen for emergency countermeasures and 150 million yen for long-term countermeasures. However, it must be noted that these obtained CPLYSs are highly dependent on the cancer slope factor and should be considered as an upper limit since there may be a cancer effect threshold.     

Characterization of polystyrene-binding peptides (PS-tags) for site-specific immobilization of proteins

In this study, we characterized polystyrene-binding peptides (PS-tags) that possess a specific binding affinity for hydrophilic polystyrene (phi-PS) plates. Both the FITC-labeled PS19-1 (RAFIASRRIKRP) and PS19-6 (RIIIRRIRR) peptides showed strong binding affinity for commercially available hydrophilic, but not hydrophobic, PS plates in the presence of the non-ionic surfactant Tween 20. The dissociation constants (K_d) of the PS19-1 and PS19-6 peptides for the hydrophilic PS-A plate were 169 and 86 nM, respectively, and the K_d of both peptides increased with the concentration of NaCl or urea. Based on adsorption yield and residual activity of glutathione S-transferase (GST) after fusion with the PS19-6 peptide or its variants, it was found that the basic amino acid in the PS-tags, i.e., Arg was essential for the strong binding affinity of PS-tags in both the peptide and peptide-fused protein forms The aliphatic amino acids in PS19-6 and PS19-6L, such as Ile or Leu, were also effective. Thus, a series of PS-tags that possess this unusual feature, especially the peptides PS19-6 (RIIIRRIRR) and PS19-6L (RLLLRRLRR), are potential candidate affinity peptide tags for site-specific immobilization of proteins onto hydrophilic PS plates, which show potential as solid supports for protein-based biochips.     

Kinetic diversity in the fusion of exocytotic vesicles

Age is the most important factor for the durability of biological valves. With an original design the Carpentier-Edwards pericardial valve showed improved results at 10 years. The influence of age on valve related complications is studied with a 10 year follow up on 807 valvular replacements. METHODS: Between January 1984 and December 1993, 807 patients underwent valve replacements with a Carpentier-Edwards pericardial bioprosthesis. Patients, 193 were younger than 60 years, 284 between 60 and 70 years and 330 patients were older than 70 years. All patients but seven were followed up for an average of 4.18 years after their operation and total follow up was 3373 patient years. Patients were divided into three groups of age: group I, less than 60 years; group II, 60-70 years; group III, over 70 years. A retrospective comparison was made between age groups. RESULTS: At 11 years, valve related complications included 97 patients with 27 valve related deaths. Rates of valve related death increase with age linearized rate were 0.3, 0.6 and 1.2%, respectively. No difference was observed for rates of all valve related morbidity: 2.6, 2.4 and 3.5%, respectively. Risk of thromboembolism increased with age, linearized rates were: 0.3, 0.7 and 1.3%. Risk of deterioration and reoperation decreased with age, rates of deterioration were 0.8, 0.1 and 0%. Other valve related events had the same incidence in all groups. No statistical difference was observed between group II and group III for deteriorations and reoperations. CONCLUSIONS: The performance of the Carpentier-Edwards pericardial valve is the same at 10 years in group II and III. This study supports the clinical use of this tissue valve in patients over 60 years. The results in group I are satisfactory, nevertheless, a more durable biological valve is needed for young patients.     

Connection of VLSI chips to printed circuit board using stacked solder bumps

A new type of flip-chip interconnection technology usingstacked solder bumps is proposed, where the diameter of theupper solder bump is less than that of the lower ones. This isto reduce the capacitance between the stacked solder bumps and the ground plane and to prolong the lifetime ofthe solder joints.     

Effects of the initial stress on the propagation and localization properties of Rayleigh waves in randomly disordered layered piezoelectric phononic crystals

In this paper, the effects of the initial stress on the propagation and localization properties of the Rayleigh surface waves in randomly disordered layered piezoelectric phononic crystals are studied. Due to different mechanical properties between the piezoelectric material and the polymer, different initial stresses in these two layers satisfying the equilibrium condition and interfacial compatibility are considered, which is more suitable for the practical cases. The transfer matrix between two consecutive piezoelectric unit cells is derived according to the continuity conditions. The expression of the localization factor is presented, and the wave localization properties are analyzed. Numerical calculations for the PVDF/PZT–2 periodic composites with the initial stress are performed. The band gap characteristics are studied taking the mechanical and electrical coupling into account. It is found that the localization degree can be influenced by the piezoelectric constants. With the increase in the piezoelectric constant, the stop band regions are enlarged for the ordered structures, and the localization properties of Rayleigh waves are strengthened for the disordered systems. The Rayleigh waves will be localized in mistuned periodic piezoelectric composites. The characteristics of band gaps and wave localization in ordered and disordered piezoelectric phononic crystals can be significantly changed by tuning the initial stress.     

Thermal deformation measurement of the solder joints in electronic packages using electron moiré method

In this paper, electron moiré method is used to measure the thermal deformation of electronic packages. In order to observe the electron moiré fringe, a holographic grid was replicated on the cross section of the BGA type package at 150°C. This grid was fabricated on a glass plate using a moving point holographic system, and was replicated to measured area at high temperature. Under SEM, the holographic grid(specimen grid) and a programmed electron beam scan(master grid) interfere and form electron moiré patterns. The shear strain measurement technique using electron moiré method is described. Using the electron moiré method, the shear strains in the different solder joints were measured and analysed. Some useful results were obtained.