Moving pick‐up‐type contactless power transfer systems and their efficiency using series and parallel resonant capacitors

The equivalent circuit, the efficiency, and the important characteristics of moving pick‐up type contactless power transfer systems are described. If the primary series capacitor and the secondary parallel capacitors are chosen correctly and the winding resistances are ignored, the equivalent circuit of the transformer with these capacitors becomes the same as an ideal transformer at the resonant frequency. This simple approximation helps to understand the phenomena occurring with load changes. Because the circuit analysis becomes simple, the approximate value of the power transfer efficiency can be derived. This paper describes the determination of the capacitor values, the derivation of the equivalent circuit and the efficiency, and test results. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 172(2): 47–54, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20970     

Consideration of multi‐coil type magnetization system for magnetic particle testing of omnidirectional crack in all surfaces of 3D shape test object

Mechanical parts, plants, and cross‐linkages inspected with magnetic‐particle testing (MT) are typically complex 3D shapes. In complex 3D shape portions, because a magnetizer often cannot be configured to inspection portions and the test object cannot be appropriately magnetized, there is a possibility of overlooking a crack in such an instance. Thus, MT system development that was successfully able to detect omnidirectional cracks in 3D shape portions was considered in this study's trials. Two multi‐coil type magnetizers were hence arranged face‐to‐face, and the magnetization of omnidirectional scenarios for all surfaces of 3D shape test object was evaluated.     

Music composition by interaction between human and computer

This paper aims at constructing a music composition system that composes music by the interaction between human and a computer. Even users without special musical knowledge can compose 16-bar musical works with one melody part and some backing parts using this system. The interactive Genetic Algorithm is introduced to music composition so that users’ feeling toward music is reflected in the composed music. One chromosome corresponds to 4-bar musical work information. Users participate in music composition by evaluating composed works after GA operators such as crossover, mutation, virus infection are applied to chromosomes based on the evaluation results. From the experimental results, it is found that the users’ evaluation values become high over the progress of generations. That is, the system can compose 16-bar musical works reflecting users’ feeling. Muneyuki Unehara: He received his M.S. in Engineering in 2002 from Institute of Science and Engineering, University of Tsukuba. Currently, he is a Ph.D. candidate of Graduate School of Systems and Information Engineering, University of Tsukuba. His research interests include the construction of intelligent systems by considering soft computing techniques and human interface. Takehisa Onisawa, Ph.D.: He received Dr.Eng. in Systems Science in 1986 from Tokyo Institute of Technology. Currently, he is a Professor in the Graduate School of Systems and Information Engineering, University of Tsukuba. His research interests include applications of soft computing techniques to human centered systems thinking. He is a member of IEEE and IFSA.     

Topical Phenomena Observed in a Short-Gap Atmospheric Discharge Using Rotor and Post Electrodes

Correlation of light emission, discharge structure, waveform of the discharge current, electrode configuration, and electromagnetic radiation is examined with the intent of obtaining an effective means for preventing electromagnetic interference (EMI) due to a short-gap discharge. The electromagnetic radiation (EMR) level resulting from a current step which, in turn, was formed by a discrete movement of a cathode spot was clearly recognized. A combination of needle rotor and needle post gave the smallest electromagnetic radiation level in the experiments.     

Behaviour of the spin-spin relaxation time for natural rubber vulcanizates under large deformation

The spin-spin relaxation time, T₂, for DCP-cured natural rubber with various crosslink densities, v_e, has been measured under various deformation. T₂ is separated into two components: one is the long T₂ component, T_2L, for the mobility of amorphous network chains, the other is the short one, T_2S, for that of the strain-induced crystalline chains. T_2L decreased exponentially with increasing extension ratio,α, and the decreasing rate was more remarkable with increasing v_e. The α and v_e dependence of T_2L has been quantitatively explained by the equation experimentally derived by Nishi et al.T_2L under various extension increased and became almost constant with increasing temperature, while the corrected fraction of T_2S, T_2S (%), gradually decreased. The apparent melting point, T_m, at which the corrected T_2S (%) was zero under various deformation was determined. The α dependence of T_m, has been discussed by using Flory's equation.     

Dietary CLA and DHA modify skin properties in mice

This study investigated the influence of PUFA on the properties of mouse skin. Mice (3 wk old) were given free access to oils high in linoleic acid, CLA, or DHA for 4 wk. At the end of the experiment, their skins were compared by both biochemical and histological methods. No significant differences in lipid and collagen contents were detected among treatments, although the FA composition in the skin was altered depending upon the FA composition of the supplemented oils. Electron microscopy revealed that the subcutaneous tissue layers in the CLA and DHA groups were significantly thinner than that in the high linoleic acid group, whereas no differences in the thickness of dermis layers were observed among the three groups. These results suggest that skin properties in mice are readily modified by dietary FA sources within 4 wk of dietary oil supplementation.     

Numerical prediction of sound generated from flows with a low Mach number

Numerical computations of sound generated from flows with a low Mach number are presented based on Lighthill’s acoustic analogy with an assumption that sound does not alter the flow field from which it is generated. The source fluctuations of the flow field are computed by a large-eddy simulation (LES) with Dynamic Smagorinsky Model (DSM) and they are fed to the following acoustical computation as input data. An explicit/implicit finite element method with second order accuracy both in time and space is used for flow field discretization. The method is applied to the prediction of sound in three different classes of problems: far-field sound generated from flow around a bluff body, sound resulting from blade-stator interaction of turbomachinery and sound due to a turbulent boundary layer on an aerofoil. The computed frequency spectra of the sound show a fairly good agreement with the measured spectra for all the cases.     

10-GHz 8.7-ps Pulse Generation From a Single-Mode Gain-Switched AlGaAs VCSEL at 850 nm

We have successfully generated a 10-GHz 8.7-ps pulse train at 850 nm by using a gain switching technique with a high-speed AlGaAs-based vertical-cavity surface-emitting laser (VCSEL). The VCSEL, which operates in a single transverse mode by employing an aluminum oxide aperture, has a modulation bandwidth of 6.3 GHz and a relaxation oscillation frequency at around 11.7 GHz. An error-free 10-Gb/s return-to-zero data modulation was demonstrated by using the generated 10-GHz pulse train.     

A 250-Mb/s/pin, 1-Gb double-data-rate SDRAM with a bidirectionaldelay and an interbank shared redundancy scheme

This paper describes three circuit technologies indispensable for high-bandwidth multibank DRAM's. (1) A clock generator based on a bidirectional delay (BDD) eliminates the output skew. The BDD measures the cycle time as the quantity charged or discharged of an analog quantity, and replicates it in the next cycle. This achieves a 0.18-mm ², two-cycle-lock clock generator operating from 25 to 167 MHz with a 30-ps resolution. (2) A quad-coupled receiver eliminates the internal skew caused by the difference between a rise input and a fall input by 40%. (3) An interbank shared redundancy scheme (ISR) with a variable unit redundancy (VUR) efficiently increases yield in multibank DRAM's. The ISR allows redundancy match circuits to be shared with two or more banks. The VUR allows the number of units replaced to be variable. These circuit technologies achieved a 250-Mb/s/pin, 8-bank, 1-Gb double-data-rate synchronous DRAM