Back‐channel‐etched thin‐film transistor using c‐axis‐aligned crystal In–Ga–Zn oxide

Our crystalline In–Ga–Zn oxide (IGZO) thin film has a c‐axis‐aligned crystal (CAAC) structure and maintains crystallinity even on an amorphous base layer. Although the crystal has c‐axis alignment, its a‐axis and b‐axis have random arrangement; moreover, a clear grain boundary is not observed. We fabricated a back‐channel‐etched thin‐film transistor (TFT) using the CAAC‐IGZO film. Using the CAAC‐IGZO film, more stable TFT characteristics, even with a short channel length, can be obtained, and the instability of the back channel, which is one of the biggest problems of IGZO TFTs, is solved. As a result, we improved the process of manufacturing back‐channel‐etched TFTs.     

Improvement in D-E Hysteresis Curve Squareness of PZT Thin Films—Effect of Oxygen Partial Pressure in High-Pressure Post-Annealing

A high-pressure annealing was applied to a post-annealing process for sol-gel derived PZT thin films. The squareness of D-E hysteresis curves changes depending on both total pressure and oxygen concentration. Moreover, the change follows the product of the total pressure and the oxygen concentration, which correspond to oxygen partial pressure P_O2. Where the P_O2 is higher than 0.03 MPa, few of the squareness of the hysteresis curve are excellent. The squareness of the hysteresis curves dramatically improve as the P_O2 decreases. Where the P_O2 is lower than 0.01 MPa, the squareness deteriorates slightly. These changes in the D-E hysteresis curves are thought to be explained by the generation of lead and oxygen vacancies as a function of the P_O2.     

Mutated KIT Tyrosine Kinase as a Novel Molecular Target in Acute Myeloid Leukemia

KIT is a type-III receptor tyrosine kinase that contributes to cell signaling in various cells. Since KIT is activated by overexpression or mutation and plays an important role in the development of some cancers, such as gastrointestinal stromal tumors and mast cell disease, molecular therapies targeting KIT mutations are being developed. In acute myeloid leukemia (AML), genome profiling via next-generation sequencing has shown that several genes that are mutated in patients with AML impact patients’ prognosis. Moreover, it was suggested that precision-medicine-based treatment using genomic data will improve treatment outcomes for AML patients. This paper presents (1) previous studies regarding the role of KIT mutations in AML, (2) the data in AML with KIT mutations from the HM-SCREEN-Japan-01 study, a genome profiling study for patients newly diagnosed with AML who are unsuitable for the standard first-line treatment (unfit) or have relapsed/refractory AML, and (3) new therapies targeting KIT mutations, such as tyrosine kinase inhibitors and heat shock protein 90 inhibitors. In this era when genome profiling via next-generation sequencing is becoming more common, KIT mutations are attractive novel molecular targets in AML.     

Swelling Pressure of Wet Rice Grains Estimated from Distribution Coefficients of Saccharides

The apparent density and porosity of four rice cultivars, Koshihikari, Yumepirika, Habutaemochi, and Kitayukimochi, decreased and increased, respectively, with the increasing temperature in the range of 5 °C to 60 °C. Especially large changes in both apparent density and porosity were observed at 60 °C, which can be ascribed to the starch gelatinization of rice. The swelling pressures of wet rice grains were estimated to be 7.5, 6.3, 6.2, and 5.9 MPa at 25 °C for Koshihikari, Yumepirika, Habutaemochi, and Kitayukimochi, respectively, from the distribution coefficients of solutes with different molar volumes. Rice grains having higher amylose content exhibited a weak tendency toward higher swelling pressure. The distribution coefficients of fructose for the Koshihikari and Habutaemochi cultivars were larger at higher temperatures, but the temperature dependence of the swelling pressure was not significant for both cultivars. These results suggested that the increase in the distribution coefficient was caused by the gradual relaxation of the interior structure of rice with increasing temperature.     

Comparison of Centralized and Decentralized Systems in Power System Restoration

This paper proposes a multiagent approach to decentralized power system restoration for distribution system networks and presents a comparison of centralized and decentralized systems for power system restoration. Numerous studies have been conducted on power system restoration problems. From the viewpoint of system structures, this research can be divided into two categories: centralized systems and decentralized systems. In this study, we solve a power system restoration problem for a power distribution network by two different methods: mathematical programming (MIP) and the proposed multiagent‐based method (MAS). The proposed multiagent system consists of several distributing substation agents (DSAGs) and load agents (LAGs). An LAG corresponds to the customer load, and a DSAG supplies electricity to the LAG. From the simulation results, it can be seen that the proposed system can reach the right solution by making use of only local information and that the solution quality is better than that of the centralized system (MIP). This means that the proposed multiagent restoration system is a promising approach to larger scale distribution networks.     

Nanowrinkled and Nanoporous Polyethylene Membranes Via Entanglement Arrangement Control

Crystalline homopolymers, including polyethylene (PE), which has the simplest architecture, form a nanometer‐sized combination of crystalline and amorphous components, but their arrangement control, similar to self‐assembled phase‐separation of block‐copolymers, is usually difficult. However, molecular entanglements trapped between crystalline and amorphous components of homopolymers coincide with the segmental linking points on the interfaces of the microphase separation for block copolymers. Nanowrinkled PE membranes are prepared with a network of 30 nm‐thick homogeneous lamellae using a novel entanglement control technique composed of biaxial melt‐drawing and melt‐shrinking procedures, which are limited for highly entangled ultrahigh molecular weight materials. Such a network arrangement of nanowrinkling lamellae spreading on membrane surface and also across the membrane thickness improves the mechanical properties of both tensile strength and tearing strength. Subsequent cold‐drawing causes delamination of the lamellar interfaces, leading to the resultant nanoporous morphology composed of passing‐through channels that are several tens of nanometers in diameter, without any solvent processing.