Removal of hydrogen sulfide from methane using commercial polyphenylene oxide and Cardo-type polyimide hollow fiber membranes

The performance of commercially available poly (2,6-dimethyl-1,4-phenylene oxide) (PPO) and Cardotype polyimide (PI) hollow fiber membranes was investigated in removing hydrogen sulfide from methane in a series of bench-scale experiments. It was observed that in the concentration range of hydrogen sulfide in methane from 101 to 401 ppm, the methane permeability decreased in the presence of hydrogen sulfide for Cardo-type polyimide hollow fiber membranes, whereas the PPO membrane performance was not affected. The separation coefficients of hydrogen sulfide/methane were 6 and 4 for PI and PPO membranes, respectively. Effects of temperature on the performance of PI and PPO membranes were investigated. It was observed that the permeabilities of both components of the mixture increased by increasing temperature, whereas the selectivities remained constant.     

Electrochemical properties of N-doped hydrogenated amorphous carbon films fabricated by plasma-enhanced chemical vapor deposition methods

Nitrogen-doped hydrogenated amorphous carbon thin films (a-C:N:H, N-doped DLC) were synthesized with microwave-assisted plasma-enhanced chemical vapor deposition widely used for DLC coating such as the inner surface of PET bottles. The electrochemical properties of N-doped DLC surfaces that can be useful in the application as an electrochemical sensor were investigated. N-doped DLC was easily fabricated using the vapor of nitrogen contained hydrocarbon as carbon and nitrogen source. A N/C ratio of resulting N-doped DLC films was 0.08 and atomic ratio of sp³/sp²-bonded carbons was 25/75. The electrical resistivity and optical gap were 0.695 Ω cm and 0.38 eV, respectively. N-doped DLC thin film was found to be an ideal polarizable electrode material with physical stability and chemical inertness. The film has a wide working potential range over 3 V, low double-layer capacitance, and high resistance to electrochemically induced corrosion in strong acid media, which were the same level as those for boron-doped diamond (BDD). The charge transfer rates for the inorganic redox species, Fe^2+/3+ and Fe(CN)₆^4−/3− at N-doped DLC were sufficiently high. The redox reaction of Ce^2+/3+ with standard potential higher than H₂O/O₂ were observed due to the wider potential window. At N-doped DLC, the change of the kinetics of Fe(CN)₆^3−/4− by surface oxidation is different from that at BDD. The rate of Fe(CN)₆^3−/4− was not varied before and after oxidative treatment on N-doped DLC includes sp² carbons, which indicates high durability of the electrochemical activity against surface oxidation.     

Mechanical properties and morphological changes of poly(lactic acid)/polycarbonate/poly(butylene adipate‐co‐terephthalate) blend through reactive processing

The mechanical properties and morphological changes of poly(lactic acid) (PLA), polycarbonate (PC), and poly(butylene adipate‐co‐terephthalate) (PBAT) polymer blends were investigated. Several types of blend samples were prepared by reactive processing (RP) with a twin‐screw extruder using dicumyl peroxide (DCP) as a radical initiator. Dynamic mechanical analyses (DMA) of binary polymer blends of PC/PBAT indicated that each component was miscible over a wide range of PC/PBAT mixing ratios. DMA of PLA/PBAT/PC ternary blends revealed that PBAT is miscible with PC even in the case of ternary blend system and the miscibility of PLA and PBAT can also be modified through RP. As a result, the tensile strain and impact strength of the ternary blends was increased considerably through RP, especially for PLA/PBAT/PC = 42/18/40 (wt/wt/wt) with DCP (0.3 phr). Scanning electron microscopy (SEM) analysis of the PLA/PBAT/PC blends revealed many small spherical island phases with a domain size of approximately 0.05–1 μm for RP, whereas it was approximately 10 μm without RP. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Roles of inherent metallic species in secondary reactions of tar and char during rapid pyrolysis of brown coals in a drop-tube reactor

Two pairs of raw and acid-washed coal samples were prepared from Yallourn and Loy Yang brown coals, and subjected to rapid pyrolysis in a drop-tube reactor at 1073-1173 K in a stream of N₂ or H₂O/N₂ mixture. Examinations were made on the roles of the inherent metallic species in the secondary reactions of nascent tar and char that were formed by the intraparticle primary reactions. The experimental results revealed that the inherent metallic species were essential for vary rapid steam reforming/gasification of the nascent tar/char and simultaneous suppression of soot formation. In the absence of the metallic species, the soot formation from the tar accounted as much as 15-19 and 6-13% of the carbon in coal in N₂ and H₂O/N₂, respectively. The metallic species reduced the yield of soot to 6-8% in N₂ by enhancing the reforming of tar by H₂O generated from the pyrolysis of coal. In the H₂O/N₂ stream, instead of soot formation, a net gasification conversion up to 17% within 4.3 s was observed in the presence of the metallic species as a result of catalytic gasification of the nascent char. Moreover, the metallic species catalyzed the steam reforming of the nascent tar, giving its conversion up to 99%. Over the range of the conditions employed, a one-to-one stoichiometry was established between the steam consumption and the yield of carbon oxides formed by the steam reforming/gasification and water-gas-shift reaction.     

Dietary conjugated linolenic acid in relation to CLA differently modifies body fat mass and serum and liver lipid levels in rats

The present study compared the effect of dietary conjugated linolenic acid (CLNA) on body fat and serum and liver lipid levels with that of CLA in rats. FFA rich in linoleic acid, α-linolenic acid, CLA, or CLNA were used as experimental fats. Male Sprague-Dawley rats (4 wk old) were fed purified diets containing 1% of one of these experimental fats. After 4 wk of feeding, adipose tissue weights, serum and liver lipid concentrations, serum tumor necrosis factor (TNF)-α and leptin levels, and hepatic β-oxidation activities were measured. Compared with linoleic acid, CLA and, more potently, CLNA were found to reduce perirenal adipose tissue weight. The same trend was observed in the weight of epididymal adipose tissue. CLNA, but not CLA, was found to significantly increase serum and liver IG concentrations. Serum FFA concentration was also increased in the CLNA group more than in the other groups. The activity of β-oxidation in liver mitochondria and peroxisomes was significantly higher in the CLNA group than in the other groups. Thus, the amount of liver TG exceeded the ability of hepatic β-oxidation. Significant positive correlation was found between the adipose tissue weights and serum leptin levels in all animals (vs. perirenal: r=0.557, P<0.001; vs. epididymal: r=0.405, P<0.05). A less significant correlation was found between adipose tissue weights and serum TNF-α level (vs. perirenal: r=0.069, P<0.1; vs. epididymal: r=0.382, P<0.05). Although the mechanism for the specific effect of CLNA is not clear at present, these findings indicate that in rats CLNA modulated the body fat and TG metabolism differently from CLA.     

Chemical modification of polynorbornene: transformation of ester moiety containing polynorbornene to carboxylic acid structure

Polynorbornene (PNB) having methyl ester in side chain was partially hydrolyzed under alkaline condition in mixed organic solvents containing tetramethylammonium hydroxide as a base. Through hydrolysis of methyl ester group in PNB under basic condition, PNB having carboxylic acid can be obtained and degree of hydrolysis (DH) were evaluated by ¹H NMR measurement from 0.1 to 0.8, depending upon reaction conditions such as reaction time, solvent, and amount of base. The resulting hydrolyzed PNB were characterized by differential scanning calorimetry, Fourier transform infrared spectroscopy, and size exclusion chromatography. No remarkable decreasing of molecular weight was observed and chain scission does not occur during the hydrolysis of PNB in the reaction condition examined here. The glass transition temperature of hydrolyzed PNB increased with increase in DH which can be attributed to the existence of intermacromolecular association of carboxylic acid in hydrolyzed PNB. Esterification of PNB having carboxylic acid was also carried out by using alkyl halide and DBU.     

Chemical pathways for the polymerization of enines

AM1 calculations are reported for enines with aromatic substituents. It was found that the position of the unsaturated bonds in each molecule may account for the reactivity of each isomer via different polymerization pathways. The resonant structure of the charged form of one of the molecules allowed speculation about the observed inhibition of the polymerization reaction.     

Diacetylene-containing polymers. XI. Synthesis and characterization of poly(hexa-2,4-diynylene-1,6-dioxydibenzoate) and poly(octa-3,5-diynylene-1,8-dicarboxylate) containing p-nitroaniline groups

Summary Two novel polymers containing p-nitroaniline group in the side chain and diacetylene groups in the main chain, were synthesized, and characterized. The polymers gave films of excellent optical quality by spin coating from DMF or chloroform. The one containing benzoate had a T_g of 103°C and its thermal cross-linking through the diacetylene group started at around 160°C. The one containing pentynoate had a T_g of 35°C and its cross-linking started at around 120°C. It was shown that thermosetting resins with functional groups could be obtained by using diacetylene-containing polymers. Although these two polymers have a same polar dye molecule, the second order nonlinear optical property was so different, showing that the main chains are very important for nonlinear optical property. Irradiation of UV light converted the polymer films to completely insoluble thermoset resins. Received: 13 February 2001/Revised version: 25 July 2001/Accepted: 30 July 2001     

Well‐defined,environment‐friendly synthesis of polypeptides based on phosgene‐free transformation of amino acids into urethane derivatives and their applications

In this study, both naturally occurring and artificial amino acids were successfully transformed into the corresponding urethane derivatives using diphenyl carbonate. The urethanes thus prepared could be efficiently cyclized into amino acid N‐carboxyanhydrides (NCAs) without the requirement of phosgene. In addition, the presence of primary amines converted the urethane derivatives into NCAs and initiated the ring‐opening polymerization of the in situ formed NCAs, allowing for the well‐defined synthesis of polypeptides. These polypeptides contained initiating ends functionalized by an amine‐derived residue and propagating ends bearing the reactive amino group. By precise control of the structures of the polypeptides, various polypeptide conjugates such as block copolymers and graft copolymers were successfully synthesized as designed, and their applications in antifouling coatings against proteins, drug delivery systems and biosensors were demonstrated. © 2019 Society of Chemical Industry