High-Temperature Oxidation at 1500° and 1600°C of SiC/Graphite Coated with Sol–Gel-Derived HfO2

Oxidation of SiC compositionally graded (SCGed) graphite coated with HfO₂ derived from HfCl₄ by a sol–gel process was performed at 1500° and 1600°C in a flowing gas mixture of Ar and O₂ (80/20 kPa). SCGed graphite was produced by reaction of graphite with either molten Si or SiO gas at 1450°C. The sol–gel-derived HfO₂ precursor was deposited on SCGed graphite by a dip-coating method. Isothermal and cyclic oxidation of uncoated- and HfO₂-coated SCGed graphite was studied by monitoring overall weight change using an electro-microbalance. Scanning electron microscopy with energy-dispersive X-ray analysis was used to observe the surfaces and cross-sections of the oxidized HfO₂-coated SCGed graphite. The formation of HfSiO₄ was confirmed on the outer layer of the oxidized sample, beneath which a thin silica layer was formed. The improved oxidation resistance of SCGed graphite by coating with HfO₂ is discussed on the basis of the formation of these two layers.     

A decision theoretic approach to change point estimation for binomial CUSUM control charts

Detecting when the process has changed is a classical problem in sequential analysis and is an important practical issue in statistical process control. This article is concerned about the binomial cumulative sum (CUSUM) control chart, which is extensively applied to industrial process control, health care, public health surveillance, and other fields. For the binomial CUSUM, a maximum likelihood estimator has been proposed to estimate the change point. In our article, following a decision theoretic approach, we develop a new estimator that aims to improve the existing methods. For interval estimation, we propose a parametric bootstrap procedure to construct the confidence set of the change point. We compare our proposed method with the maximum likelihood estimator and Page's last zero estimator in terms of mean squared error by simulations. We find that the proposed method gives more unbiased and robust results than the existing procedures under various parameter designs. We analyze jewelry manufacturing data for illustration.     

Properties of networks obtained by internal plasticization of epoxy resin with aromatic and aliphatic glycidyl compounds

In order to improve the fracture properties of p, p′-diaminodiphenylmethane-cured epoxy resin, various kinds of aromatic and aliphatic glycidyl compounds were investigated as a modifier at an amount of 30 wt %. Several compounds promoted the fracture toughness. In any glycidyl compounds, however, heat resistance was decreased by the modification. The dynamic mechanical properties of the modified epoxy resins were measured. The crosslinking density ρ was calculated from the theory of rubber elasticity, and the mechanical properties of the resins were discussed in regard to the crosslinking density. Tensile strength was scarcely affected by the crosslinking density. Elongation at break and Izod impact strength increased remarkably with decrease in crosslinking density. The fracture toughness K_Ic- increased with decrease in crosslinking density except at small ρ.     

Hydrodesulfurization activity of highly dispersed Co sulfide clusters prepared in zeolite cages

Zeolite-supported highly dispersed Co sulfide clusters are synthesized using Co(CO)₃ (NO) as a precursor. The amount of Co inCoS_x/zeolite anchored by a CVD technique increases as the Al/Si ratio of the zeolite increases, whereas the activity per Co atomdecreases for thiophene hydrodesulfurization (HDS). When an Na-exchanged USY zeolite is used, the Co sulfide catalyst shows a muchhigher HDS activity than a conventional Co—Mo/Al₂ O₃ catalyst. It is considered from XAFS and NO adsorption techniques that thehigh HDS activity of CoS_x/USY-Na is due to an extremely high dispersion of Co sulfide clusters. This revised version was published online in July 2006 with corrections to the Cover Date.     

Synthesis of Phase-Pure Pb(ZnxMg1–x)1/3Nb2/3O3 up to x= 0.7 from a Single Mixture via a Soft-Mechanochemical Route

Phase-pure perovskite Pb(Zn _x Mg_{1– x} )_1/3Nb_2/3O₃ solid solution (PZ _x M_{1– x} N) is obtained for x ≦ 0.7 by heating a milled stoichiometric mixture of PbO, Mg(OH)₂, Nb₂O₅, and 2ZnCO₃·3Zn(OH)₂·H₂O at 1100°C for 1 h. Percent perovskite ( f _P) with respect to total crystalline phase decreases with increasing temperature of subsequent heating then increases to 900°C for the mixtures where x ≦ 0.8 and milled for 3 h. For mixtures with x = 0.9 and x = 1, f _P decreases monotonically. Curie temperature increases almost linearly with increasing x up to x = 0.7. The maximum dielectric constant at 1 kHz is 2×10⁴ and 1.7×10⁴ for the mixture with x = 0.4 and x = 0.7, respectively. The stabilization mechanism of strained perovskite is discussed.     

Development of thin‐film composite membranes for carbon dioxide and methane separation using sulfonated poly(phenylene oxide)

Novel membranes based on sulfonated poly (phenylene oxide) (SPPO) was developed. SPPO membranes in the hydrogen form were converted to metal ion forms. The effect of exchange with metal ions including monovalent (Li⁺, Na⁺, K⁺), divalent (Mg²⁺, Ba²⁺, Ca²⁺) and trivalent (Al³⁺) ions was investigated in terms of permeation rate and permeation rate ratios for CO₂ and CH₄ gases. Both dense homogeneous membranes and thin‐film composite (TFC) membranes were studied for their gas separation characteristics. The effect of membrane preparation conditions and operating parameters on the membrane performance were also investigated. The selectivity of the TFC membrane increased as the cationic charge density increased as a result of electrostatic cross‐linking. TFC membrane of very high selectivity was achieved by coating a thin layer of SPPO‐Mg on a PES substrate. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 76: 735–742, 2000     

Preparation of Co–Mo/B2O3/Al2O3 catalysts for hydrodesulfurization: Effect of citric acid addition

The effect of citric acid (CA) addition was studied on the HDS of thiophene over Co–Mo/(B)/Al₂O₃ catalysts. The catalysts were characterized by means of LRS, Mo K-edge EXAFS, NO adsorption capacity measurements, and UV–vis spectra. The catalysts were subjected to a chemical vapor deposition (CVD) technique using Co(CO)₃NO as a precursor of Co in order to get deeper insights into the effect of citric acid addition. It was shown that the HDS activity was enhanced by the citric acid addition up to the CA/Mo mole ratio of around 1 and leveled off with further addition. The amount of Co anchored by the CVD was increased by the addition of citric acid, suggesting an increase in the dispersion of MoS₂ particles on the catalyst by the simultaneous presence of Co, Mo and citric acid, in conformity with the increase in the NO adsorption capacity. In contrast to Co–Mo catalysts, the edge dispersion of MoS₂ particles in Mo/B/Al₂O₃ was not affected by the addition of citric acid. The LRS, UV–vis spectra and Mo K-edge EXAFS showed that Co–CA and Mo–CA surface complexes are formed by the addition of citric acid. The Co–CA surface complex is more preferentially formed on CoMo/Al than on CoMo/B/Al, in agreement with a greater promoting effect of citric acid at a lower CA/Mo mole ratio for CoMo/Al than for CoMo/B/Al.