TRVs and fault clearing stresses in extra-high-voltage radial networks

To cope with the high rate of increase of power demand in the main industrialized districts in Japan, 550-kV transmission systems covering the districts have been reinforced, with most of the main power plants connected directly to these systems. Through 550-/300-kV substations, the majority of power to the districts is supplied by 300-kV systems. To limit the excess short-circuit capacity in the 300-kV systems, they tend to be reconstructed as so-called radial networks. In radial networks with high short-circuit capacity and relatively small number of transmission lines connected to the substation busbars, the rate of rise of TRV can be far higher than standard value. This paper analyzes the transient recovery voltages (TRV) in such extra-high-voltage radial networks in Japan, together with the relevant stresses to circuit-breakers during fault clearings. Future system conditions have also been introduced. As the typical rate of rise of the TRV values, more than twice that of today's standard ones are probable.     

Characterization of calcium-independent cytosolic phospholipase A2 activity in the submucosal regions of rat stomach and small intestine

This study was undertaken to compare the calcium-independent phospholipase A₂ (PLA₂) activities in the cytosols of twelve rat tissues and to determine whether their activities were distinct. 1-O-Alk-1′-enyl-2-[¹⁴C]-oleoyl-sn-glycero-3-phosphocho-line (PlsC) and 1-O-Alk-1′-enyl-2-[¹⁴C]oleoyl-sn-glycero-3-phosphethanolamine (PlsE) were synthesized and used as substrates, instead of phosphatidyl compounds, to exclude hydrolysis by cytosolic PLA₁ activity that could be present in some of the cytosolic preparations. For each tissue, we examined substrate specificity, pH optimum, and effect of adenosine triphosphate (ATP) and ATP analogues. PLA₂ activity was detected in eleven out of the twelve issues examined. Based on substrate specificity and pH optimum, cytosolic calcium-independent PLA₂ were classified in three groups. The first group, which included PLA₂ from small intestine, stomach and spleen, had the highest specific activity with PlsC as substrate (1253, 309 and 75 nmol/mg protein/hour, respectively) and an optimal pH at 6.5. Activity with PlsE as substrate was much lower (20–37%) than with PlsC. The second group of PLA₂ activities included the cytosolic activities from thymus, lung, liver and pancreas that showed lower specific activities for both substrates (14–23 nmol/mg protein/hour with PlsC) and had a broader optimal pH range of 6.1 to 7.5. The cytosols from brain, kidney, heart and muscle comprised the third PLA₂ group that was found to have a higher specific activity with PlsE (5–20 nmol/mg protein/hour) than PlsC and an optimal pH range from 7.4 to 7.9. Since the highest specific activity was found in the cytosol from small intestine, this PLA₂ was examined further. PLA₂ activity was found to be equally distributed in the cytosol of the submucosal portion of duodenum, jejunum and ileum with an optimal pH of 6.1 and a 5-fold higher activity with PlsC than PlsE as substrate. Moreover, this PLA₂ activity was inhibited by treatment with detergents. These results indicate the presence in the submucosal portion of the intestine of a calcium-independent cytosolic PLA₂ with a high specific activity toward PlsC and properties distinct from those described for the PLA₂ found in the intestinal brush-border.     

Characterization of C-S-H from Highly Reactive β-Dicalcium Silicate Prepared from Hillebrandite

β-dicalcium silicate synthesized by thermal dissociation of hydrothermally prepared hillebrandite (Ca₂(SiO₃)(OH)₂) exhibits extremely high hydration activity. Characterization of the hydrates obtained and investigation of the hydration mechanism was carried out with the aid of trimethylsilylation analysis, ²⁹Si magic angle spinning nuclear magnetic resonance, transmission electron microscopy selected area electron diffraction, and XRD. The silicate anion structure of C-S-H consisted mainly of a dimer and a single-chain polymer. Polymerization advances with increasing curing temperature and curing time. The C-S-H has an oriented fibrous structure and exhibits a 0.73-nm dreierketten in the longitudinal direction. On heating, the C-S-H dissociates to form β-C₂S. The temperature at which βC₂S begins to form decreases with increasing chain length of the C-S-H or as the Ca/Si ratio becomes higher. The high activity of β-C₂S is due to its large specific surface area and the fact that the hydration is chemical-reaction-rate-controlled until its completion. As a result, the hydration progresses in situ and C-S-H with a high Ca/Si ratio is formed.     

Effect of surface-modifying macromolecules and solvent evaporation time on the performance of polyethersulfone membranes for the separation of chloroform/water mixtures by pervaporation

Polyethersulfone (PES) membranes using different evaporation periods were fabricated by the phase-inversion method. Pervaporation experiments were conducted for chloroform/water mixtures to determine the selectivity of the PES membranes. It was found that chloroform could be concentrated in the permeate from chloroform/water binary feed mixtures by PES membranes prepared using longer evaporation periods, and that the selectivity of PES membranes in pervaporation could be reversed by shorter evaporation periods. This study also showed that by adding surface-modifying macromolecules (SMM) up to 1 wt % into the casting solution, chloroform enrichment in the permeate could be increased by 50%. Chloroform enrichment increased with increasing SMM concentration until an optimal value, after which the enrichment decreased. © 1994 John Wiley & Sons, Inc.     

Series resonant ZCS‐PFM DC‐DC power converter with high‐frequency high‐voltage transformer link for high‐power magnetron drive

This paper presents a single lossless inductive snubber‐assisted ZCS‐PFM series resonant DC‐DC power converter with a high‐frequency high‐voltage transformer link for industrial‐use high‐power magnetron drive. The current flowing through the active power switches rises gradually at a turned‐on transient state with the aid of a single lossless snubber inductor, and ZCS turn‐on commutation based on overlapping current can be achieved via the wide range pulse frequency modulation control scheme. The high‐frequency high‐voltage transformer primary side resonant current always becomes continuous operation mode, by electromagnetic loose coupling design of the high‐frequency high‐voltage transformer and the magnetizing inductance of the high‐frequency high‐voltage transformer. As a result, this high‐voltage power converter circuit for the magnetron can achieve a complete zero current soft switching under the condition of broad width gate voltage signals. Furthermore, this high‐voltage DC‐DC power converter circuit can regulate the output power from zero to full over audible frequency range via the two resonant frequency circuit design. Its operating performances are evaluated and discussed on the basis of the power loss analysis simulation and the experimental results from a practical point of view. © 2005 Wiley Periodicals, Inc. Electr Eng Jpn, 153(3): 79–87, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20126     

Multiobjective dynamic load-dispatching method for optimal operation of power systems

A new practical method is proposed which gives a quasi-optimal solution of the dynamic load-dispatching problem formulated by a multiconstraint multiobjective optimization problem. Here, the multiple constraints are rate reserve constraints and power flow ones, and the multiple objectives are fuel cost and CO₂ emission. The proposed method is an integration of the following three techniques: (1) “Group Dispatch Scheme,” which is developed by the authors, is used to satisfy a violated constraint easily. This scheme consists of three steps. The first step is to classify all generators into two groups. One is the group which should be more loaded to satisfy the violated constraint, and the other is the should-be less loaded group. The second step is to add some load to the former group, and to subtract the same load from the latter. The third step is to dispatch each group load to each groups generators, respectively; (2) the dynamic load-dispatching algorithm is used which provides, in practical time, quasi-optimal generation trajectories; (3) the conventional weighting parametric method is used to obtain a Pareto optimal solution of multiobjective problems. The effectiveness of the method is clarified by a computer simulation on the actual power system of Kansai Electric Power Company.     

Sintering of fibrous barium titanate powder compacts with preferred orientation

The sintering of fibrous BaTiO₃ powder particles was investigated. Special emphasis was given to the role of particle orientation in the compact on densification and microstructure development. Compacts were made by dry-pressing. During the initial stage of sintering, the fibrous particles rearranged and bundles of particles were formed. The volume of pores between bundles of particles decreased on further heating. Grain growth started when the sintered density reached ca. 56% of the theoretical density. Higher temperatures of sintering increased the degree of the crystal axis orientation. Thus, highly orientated sintered bodies with high densities were prepared by heating at 1500 °C.     

Fabrication of blue-light emission fused-silica substrates by using Si-ion implantation and high-temperature annealing

We fabricated fused-silica substrates which emit blue light by using Si-ion implantation and high-temperature annealing. Photoluminescence peak wavelengths are around 400 nm, and the peak intensities can be remarkable after annealing above 1150 °C.     

Twin-Related Tetragonal Variants in Yttria Partially Stabilized Zirconia

Crystals of yttria partially stabilized zirconia were grown by the arc-image floating-zone technique and studied by transmission electron microscopy. Crystals annealed at 1700°C consist of tetragonal precipitates and a cubic matrix. The platelike domains in a precipitate are twin-related tetragonal variants stacked alternately parallel to the (011) twin plane. The axial relations between the tetragonal precipitate and the cubic matrix are [100]_tetragonal|[100]_cubic, [011]_tetragonal|[011]_cubic.     

Premixed flame propagating into a narrow channel at a high speed, part 2: Transient behavior of the properties of the flowing gas inside the channel

The behavior of a premixed flame propagating from a chamber into a narrow channel at a high speed was examined using high speed and instantaneous schlieren photography, ion current measurement with electrostatic probes, and temperature measurement with an optical method. From detailed measurements of flames passing through the channel, flame extinguishment in the channel, no matter whether transient or not, was found to occur due to quenching of the reacting gas by rapid turbulent mixing with cold fresh mixture at the downstream of the contraction region and by heat transfer to the cold channel walls. Extinguishment must occur when these heat losses exceed the heat released by the chemical reaction of the flowing mixture.