Analysis of XANES for identification of highly dispersed transition metal oxides on supports

XANES of vanadium and niobium oxide on silica or alumina have been analyzed quantitatively by a deconvolution technique. Based on the results for reference compounds, local structures of supported vanadium and niobium species were identified. The composition was estimated from difference spectra for the samples which consisted of two kinds of species.     

Highly Reactive β-Dicalcium Silicate: III, Hydration Behavior at 40–80°C

The effect of curing temperature (40°, 60°, 80°C) on the hydration behavior of β-dicalcium silicate (β-C₂S) was investigated. The β-C₂S was obtained by decomposition of hillebrandite, Ca₂(SiO₃)(OH)₂, at 600°C, has a specific surface area of about 7 m²/g, and is in the form of fibrous crystals. The dependence of the hydration reaction on temperature continues until the reaction is completed. The hydration is completed in 1 day at 80°C and in 14 days at 14°C. The hydration mechanism is different above and below 60°C, but at a given temperature, the reaction mechanism and the silicate anion structures of C-S-H do not change significantly from the initial to the late stages of the reaction. High curing temperature and long curing times after completion of reaction promote silicate polymerization. The Ca/Si ratio of C-S-H shows high values, being almost 2.0 above 60°C and 1.95 below 40°C.     

AC impedance studies of anodically treated polycrystalline and homoepitaxial boron-doped diamond electrodes

The electrochemical properties of several types of diamond electrodes, including polycrystalline and homoepitaxial films, that underwent anodic treatment were examined with the electrochemical impedance spectroscopic (EIS) technique, as well as with capacitance-potential measurements. From an analysis of the impedance behavior, it was found that an additional capacitance element, which is apparent in the relatively high-frequency range (100-1000 Hz), was generated on the polycrystalline and (1 0 0) homoepitaxial diamond electrodes after anodic treatment. This capacitive element can be characterized as being non-Faradaic, because it has negligible dependence on the applied potential. Acceptor densities and depth profiles were calculated from the Mott-Schottky plots, and the acceptor densities in the near-surface region of the anodically treated surfaces were found to be extremely low. These results indicate that passive layers were generated on the diamond surfaces by the anodic treatment. The capacitance-potential behavior was also consistent with a model consisting of a semiconductor with a passive surface film. The passive film is proposed to arise as a result of the removal of hydrogen acting as an acceptor in the subsurface region, leaving hydrogen that is paired essentially quantitatively with the boron dopant, effectively neutralizing it.     

Preparation and Characterization of Chitosan‐Gellan Hybrid Capsules Formed by Self‐Assembly at an Aqueous Solution Interface

Summary: True spherical capsules are formed by electrostatic polysaccharide interaction between chitosan and gellan gum via polyion complex (PIC) formation in aqueous solutions. Dropwise addition of a chitosan solution into the gellan solution gave spherical capsules whose outside surface was gellan and whose inside was chitosan (chitosanⁱⁿ‐gellan^out capsule). Conversely, the addition of gellan into chitosan yields chitosan^out‐gellanⁱⁿ capsules. SEM observation revealed a fibrous network spreading along the capsule membrane of the chitosanⁱⁿ‐gellan^out capsule. The releasing properties of the capsules were examined using low molecular weight substances and high molecular weight proteins. For low molecular weight substances, the releasing kinetics were affected by the attractive and repulsive interactions between the substances and the inside component of the capsule. The molecular weight of the encapsulated substances also affects the releasing kinetics. These results, together with a simple preparation procedure, indicate the applicability of chitosan‐gellan capsules as drug‐carrier materials having a controlling release mechanism. As an application example, preparation of an actually eatable artificial roe was also described.

Illustrative drawing of PIC capsule formation.     

Pervaporation study of water and tert‐butanol mixtures

The permeation behavior of water/tert‐butanol mixture through Sulzer Pervap2510 hydrophilic poly(vinyl alcohol) membranes was investigated and the effects of feed composition and temperature on separation efficiency of the membranes were studied. The pervaporation experiments were carried out with feed water content varying from 0 to 20 wt % according to the existing industrial needs and with the feed temperature from 60 to 100°C. Over this range, both water flux and separation factor increased with increasing water content and feed temperature. These phenomena may be attributed to (1) the strong interaction between water and the membrane, (2) the decoupling effect of the permeants and the membrane at elevated temperatures, and (3) the steric hindrance effect of branch chain alcohol. The permeability ratio (the ideal separation factor) of water to tert‐butanol across the membrane was calculated and found to follow the same relationship with increasing temperature and water content. Both flux and separation factor obtained from the Pervap2510 membrane in this study were much higher than previous reported values, possible causes for which were analyzed. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 4082–4090, 2004     

Cationic polymerization behavior of β‐methylglycidyl ether derivatives and physical properties of their cationically cured materials

β‐Methylglycidyl ethers have been applied to Electrical and Electronic adhesives. However, there is no report about the detailed polymerization behavior and physical properties of their cured products. Hence, we investigated cationic polymerization behavior of bisphenol A di(β‐methylglycidyl) ether (Me‐BADGE) and physical properties of the cured products containing Me‐BADGE. DSC analysis suggested that Me‐BADGE could be cured completely at lower temperature than bisphenol A diglycidyl ether (BADGE). Physical properties were analyzed by dynamic viscoelastic analysis. Glass transition temperature (T_g) of BADGE homopolymer was 194°C. In contrast, the copolymer of BADGE (50 wt %) with Me‐BADGE (50 wt %) showed T_g at 124°C. According to the data of E’ and tan δ, crosslink density of the cured products decreased with increasing the Me‐BADGE content. The analysis of cationic polymerization of monofunctional β‐methylglycidyl ether suggested that the cationic polymerization proceeded not only through oxonium cation but also through carbocation formed by ring‐opening reaction of oxonium cation. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42377.     

A Method for Systematic Assessment of Intrinsically Disordered Protein Regions by NMR

Intrinsically disordered proteins (IDPs) that lack stable conformations and are highly flexible have attracted the attention of biologists. Therefore, the development of a systematic method to identify polypeptide regions that are unstructured in solution is important. We have designed an “indirect/reflected” detection system for evaluating the physicochemical properties of IDPs using nuclear magnetic resonance (NMR). This approach employs a “chimeric membrane protein”-based method using the thermostable membrane protein PH0471. This protein contains two domains, a transmembrane helical region and a C-terminal OB (oligonucleotide/oligosaccharide binding)-fold domain (named NfeDC domain), connected by a flexible linker. NMR signals of the OB-fold domain of detergent-solubilized PH0471 are observed because of the flexibility of the linker region. In this study, the linker region was substituted with target IDPs. Fifty-three candidates were selected using the prediction tool POODLE and 35 expression vectors were constructed. Subsequently, we obtained ¹⁵N-labeled chimeric PH0471 proteins with 25 IDPs as linkers. The NMR spectra allowed us to classify IDPs into three categories: flexible, moderately flexible, and inflexible. The inflexible IDPs contain membrane-associating or aggregation-prone sequences. This is the first attempt to use an indirect/reflected NMR method to evaluate IDPs and can verify the predictions derived from our computational tools.     

Measurement of internal stresses in coatings using time resolved fluorescence

This paper describes a new nondestructive technique for detecting internal stresses in coatings using time resolved fluorescence. The measurement principle is based upon an experimental result that the decay time of fluorescence from poly(3-octylthiophene), P3OT, dispersed in uniaxially-stretched polymer films decreases with increasing tensile stress acting on the films. Internal stresses in the clear coat and in the base coat of a multilayer structure, which was composed of electrodeposited coat, surface coat, base coat, and clear coat, were estimated from the decay time of fluorescence from P3OT in both coats. The order of internal stresses in the clear coat and base coat of the multilayer system was 1 MPa. When the coatings were piled up, the internal stress decreased as the distance from a metal substrate was increased. It was found that moisture and temperature influenced internal stresses in the clear coat rather than in the base coat. Internal stress in the clear coat, which was one layer coated on a metal substrate, was measured by the traditional bimetallic method or by the time resolved fluorescence technique. Comparing both methods, it was concluded that the time resolved fluorescence technique gave reliable values for internal stresses in coatings.     

Diacetylene-containing polymers. XI. Synthesis and characterization of poly(hexa-2,4-diynylene-1,6-dioxydibenzoate) and poly(octa-3,5-diynylene-1,8-dicarboxylate) containing p-nitroaniline groups

Summary Two novel polymers containing p-nitroaniline group in the side chain and diacetylene groups in the main chain, were synthesized, and characterized. The polymers gave films of excellent optical quality by spin coating from DMF or chloroform. The one containing benzoate had a T_g of 103°C and its thermal cross-linking through the diacetylene group started at around 160°C. The one containing pentynoate had a T_g of 35°C and its cross-linking started at around 120°C. It was shown that thermosetting resins with functional groups could be obtained by using diacetylene-containing polymers. Although these two polymers have a same polar dye molecule, the second order nonlinear optical property was so different, showing that the main chains are very important for nonlinear optical property. Irradiation of UV light converted the polymer films to completely insoluble thermoset resins. Received: 13 February 2001/Revised version: 25 July 2001/Accepted: 30 July 2001