Synchronous Composite Packet Switching-A Switching Architecture for Broadband ISDN

A new switching architecture for broadband ISDN, "Synchronous Composite Packet Switching (SCPS)," is proposed and evaluated. It efficiently integrates circuit and packet switching functions on a single switching system and accommodates very high speed-up to several tens of Mbit/s-communication services, such as very high speed bursts of data, still picture, and motion video, as well as 64 kbit/s or less voice and data services. The SCPS system comprises plural switch modules and plural Very high speed synchronous loops. In the SCPS system, messages on plural circuit switched channels are assembled into quasi-packets, called "composite packets," and switched synchronously between switch modules, maintaining complete time transparency and short absolute delay time. A system parameter design to obtain high system efficiency and appropriate system modularity is explained, and an example for a very large capacity transit switch of 4 Gbit/s throughput is presented. System implementation problems to realize the SCPS principle, such as efficient implementation of the composite packet assembling and loop transmission functions, are investigated and an experimental system constructed for circuit switching part is presented. The most remarkable characteristic of the SCPS is that it efficiently integrates64 times nkbit/s circuit switching with packet switching. Moreover, the SCPS system retains compatibility with existing networks and the possibiliy of evolution toward a future broadband ISDN. On the basis of the above investigations and experimental system construction, the authors conclude that the SCPS is one of the most practical switching architectures for the coming broadband ISDN era.     

Abnormality of electric field at a wedgelike edge of a conductor or a dielectric interface and methods for its relaxation

Abnormal electric field appears at a wedgelike edge of a conductor (electrode) or a dielectric interface, which usually becomes infinitely high. This paper analyzes the electric field near such an edge by the analytical variable separation method and by the numerical one of the charge simulation method. The analysis focuses on the special conditions where the electric field becomes zero at an edge. These conditions are important for the insulation design to suppress the discharge inception at such edges of conductors and dielectric interfaces. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 159(1): 1–8, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20280     

A 64 kbit/s Integrated Visual Communication System--New Communication Medium for the ISDN

Seeing-while-talking has been a dream of mankind for over a 100 years since the invention of telephone. In the past, various trials were performed in spite of the difficulty in installing the network for the actual service. However, with the progress of ISDN and the advancement of digital signal processing technology, the environment has been changing rapidly. In this paper, an integrated visual communication system is described for the enhanced communication service at 64 kbits/s, the fundamental bit rate of ISDN. The roles of state-of-theart compression of the audio and video signals are discussed and an integrated transmission method based on the priority of the information content is proposed.     

Effects of crystallographic misorientation on power loss in

The effects of the inclination angle β of the [001] axis out of the sheet plane on the thickness dependence of the power losses in     

Consideration on influence of directly modulated DFB LD spectralspread and fiber dispersion in multigigabit-per-second long-spanoptical-fiber transmission systems

The relation between optical-fiber dispersion and directly modulated distributed-feedback laser diode (DFB LD) spectral spread in multigigabit-per-second long-span transmission systems is discussed. It is observed that two peak spectra at the leading edge of the pulse induce spectral spread in directly modulated DFB LDs. Specifications for the difference between the DFB LD oscillation wavelength and the optical-fiber zero-dispersion wavelength in a multigigabit-per-second long-span transmission system, considering these two peak spectra, are predicted. Experimental confirmation was provided by 2-Gb/s-140-km and 5-Gb/s-100-km transmission experiments, using 1.5-μm zero-dispersion shifted optical fiber     

Binding of chrysophenine G by methyl cellulose and poly(vinyl alcohol)

Equilibrium constants (nK) for the binding of Chrysophenine G by methyl cellulose (MC) and poly(vinyl alcohol) (PVA) were determined spectrophotometrically in the temperature range 15–40°C. The polymer chains of PVA extended by the dye binding but those of MC shrank slightly. The enthalpy change and the entropy change for the binding by MC were negative and positive, respectively, whereas those for the binding by PVA were both negative. When the dye was bound to the extended polymer chains, the contribution of the entropy term to the binding increased. The rate of the dye bindings was studied by means of the temperature jump method. For the dye binding to PVA, the whole relaxation process finished in a very rapid step. On the other hand, for dye binding to MC, the initial rapid step was followed by two successive slower steps; the relaxation times for the slower steps were independent of the polymer concentration. The results were interpreted in terms of the stiffness of polymer chain of MC; the conformational change of the stiff chains to accommodate the dye in stable states seems to be the rate determining step in each slow relaxation.     

Reduction of heat leak in cryogenic system using Peltier current leads

Peltier current leads (PCLs) for cryogenic systems are investigated in regard to temperature dependence of thermoelectric materials. Due to the Peltier effect on the thermoelectric parts of the current lead, PCLs act as heat pumps. It is expected that PCLs will reduce the amount of heat leak from the room temperature side to the low temperature side of a cryogenic system. Six (three each for p and n type) hot-pressed BiTe samples for PCLs are selected to estimate PCL performance. Our experimental results and analyses indicate that PCLs show a capacity in the order of several hundred Amperes and as much as 20-30% reductions of heat leak.     

Application study of a high‐temperature superconducting fault current limiter for electric power system

Using high‐temperature superconductors, a superconducting fault current limiter (SFCL) was fabricated and tested. The superconductor and a vacuum interrupter serving as a commutation switch were connected in parallel with a bypass coil. When a fault occurs and excessive current flows, the superconductor is first quenched and the current is transferred to the bypass coil because of the voltage drop of the superconductor. At the same time, since a magnetic field is generated by the current flowing in the bypass coil, the commutation switch is immediately driven by an electromagnetic repulsion plate connected to the driving rod of the vacuum interrupter (VI), and the superconductor is separated from this circuit. Using the test model, we were able to separate the superconductor from the circuit by the movement of the VI within a half current cycle and to transfer all current to the bypass coil. Since the operation of the commutation switch is included in the current limiting operation of this test model, it will be a useful circuit in the development of SFCL in the future. Moreover, since it can make the energy consumption of the superconductor small during the fault state due to the realization of a high‐speed switch with simple composition, the burden on the superconductor is reduced compared with the conventional resistive type of SFCL and it is considered that the flexibility of SFCL design is increased. Cooperation with a circuit breaker was also considered; trial calculations of the parameters and energy of operation were conducted and a discussion of the installation of the SFCL in an electric power system is presented. © 2006 Wiley Periodicals, Inc. Electr Eng Jpn, 155(4): 20–29, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20265     

Palladium‐Catalyzed Hydroxymethylation of Aryl‐ and Heteroarylboronic Acids using Aqueous Formaldehyde

Cyclometallated NHC palladium complexes prepared from palladium(II) acetate [Pd(OAc)₂] and unsymmetrical 1,3‐diarylimidazolinium salts catalyzed the hydroxymethylation of (hetero)arylboronic acids using an excess amount of formalin to afford (hetero)arylmethanols in good to satisfactory yields.

     

Packed Powder as Superleak for Spin Pump Experiments in Superfluid 3He A1

Experimental exploration of highly spin-polarized states of liquid ³He by applying external magnetic field is limited by the availability of static magnetic field. In the “ferromagnetic” superfluid A₁ phase of liquid ³He there is an alternate method for boosting spin-polarization by the process of spin pumping without requiring such high magnetic field. The spin pumping in the A₁ phase takes advantage of a superleak (SL) acting simultaneously as a filter for both entropy and spin. The spin pump technique that uses the SL-spin filter and a mechanical actuator enables us to directly boost polarization of ³He. The amount of enhancement of spin polarization has been limited so far. We are now developing a new type of SL filter made of packed aluminum oxide powder (referred as PAP-SL), in order to achieve greater enhancement of spin polarization. Several kinds of the PAP-SL filter were constructed by pressing aluminum oxide powders into a cylinder holder. The packed structures were carefully characterized by a flow-rate-measurement, X-ray tomography, and mercury intrusion porosimetry. The preliminary result shows that the PAP-SL works as SL filter for the superfluid ³He.