Multirate Sampling Method for Acceleration Control System

This paper focuses on the realization of high-performance motion control based on acceleration control. A disturbance observer is used to construct an acceleration control system. A high sampling frequency is known to be effective for improving the performance. Characteristics of acceleration control are investigated to discuss the relationship between the performance and a sampling frequency of the system. The needs for a high sampling frequency for an output are then described. Based on these considerations, a novel multirate sampling method for the acceleration control system is proposed. An output sampling period is set shorter than an input sampling period, and control calculation is executed at each output sampling period in the method. The disturbance observer is redesigned for application to the multirate system. Stability analysis is performed to verify the validity of the proposal. Feasibility of the proposed method and its influence on the performance are also verified by experimental results     

Optical Burst Switching Router With 40-,10-Gb/s Bit-Rate Transparent Contention Resolution

We report a bit-rate transparent optical burst switching (OBS) router prototype using a fast 5 times 5 PLZT [(Pb,La)(Zr,Ti)O₃ ] optical matrix switch. Dynamic switching in a two-wavelength, 2 times 2 OBS switch is demonstrated. Contention resolution using a tunable Mach-Zehnder interferometer wavelength converter for both 40- and 10-Gb/s bursts is demonstrated for the first time. Error-free operation was achieved for both bit rates under the same settings, as required in autonomous networks     

Electromyographic prosthetic hand using grasping-force-magnification mechanism with five independently driven fingers

This paper proposes an electromyographic (EMG) prosthetic hand that has five independently driven fingers, a flexion drive, and a force-magnification drive. The flexion drive allows for rapid finger motion, and the force-magnification drive allows for a firm grasp. To realize the natural feeling of control similar to that of movements with nonamputated parts, the control system includes the impedance model of human forearms and utilizes the muscle contraction level extracted from a user’s EMG signals. We experimentally verified that the maximum fingertip force of the hand exceeds 20 N, and the time required to fully close the hand by the flexion drive is 0.53 s. We also experimentally verified that in response to EMG signals, the fingers can flex smoothly and the grasping force can be modulated. Furthermore, we show that taking EMG signals as inputs makes it possible to control six operations, including ones that use the five fingers in distinctive ways.     

Design principle of micromechanical probe with an electrostatic actuator for friction force microscopy

It is important to understand friction force in micro/nano mechanical devices both at high sliding speed and with high lateral resolution. Dual-axis friction force microscopes that can provide high lateral resolution and accuracy have been proposed; however, the sliding speed is limited by the probe scan speed. While a micro mechanical probe (MMP) with an electrostatic actuator can overcome this problem, details of probe design have not been established yet. This paper presents the principle of the mechanical design for an MMP with high force sensitivity and sufficient drive force. The dimensions of the double cantilever beam control the spring constants, resonant frequencies, and drive force. The use of an actuated MMP enables accurate friction force microscopy at high sliding speeds, which is required for the design of micro/nano mechanical devices.     

Modeling of the pharyngeal muscle in Caenorhabditis elegans based on FitzHugh-Nagumo equations

The pharyngeal pumping motion to send food to the bowel is a rhythmic movement in Caenorhabditis elegans. This paper proposes a simulation-based approach to investigate the mechanisms of rhythm phenomena in the pharyngeal pumping motion. To conduct the simulations, first, we developed a pharyngeal muscle model including 29 cell models which simulate the activity of each cell as a membrane potential based on FitzHugh-Nagumo equations. Then, to compare the response of the model with that of C. elegans, we calculated the electropharyngeogram (EPG), which represents the electrophysiological responses of the pharyngeal cells, using the simulated membrane potentials. The results confirmed that our model could generate the EPG similar to that measured from C. elegans. We proposed a computer simulation of the pumping motion to investigate the mechanisms of rhythm phenomena in living organisms.     

Gradually intractable problems and nondeterministic log-space lower bounds

The paper places five different problems (thek-pebble game problem, two problems aboutk finite automata, the reachability problem for Petri nets withk tokens, and the teachability problem for graphs whose k-dimensional edge sets are described by Cartesian products ofk factors) into the hierarchyNL _k of problems solvable by nondeterministic Turing machines ink-log₂ n space (and binary tape alphabet, to avoid tape speed-up). The results, when combined with the conjecture thatNL _i contains problems that requireO(n ^k ) deterministic time, show that these problems, while inP for every fixed value ofk, have polynomial deterministic time complexities with the degree of the polynomial growing linearly with the parameterk, and hence are, in this sense, gradually intractable.     

Carbon-supported growth of cross-linked platinum nanowires by surfactant templating and their elecrochemical characterization

Platinum/carbon (Pt/C) composite materials were prepared by the hydrazine reduction of H2PtCl6 confined to a mixed surfactant lytropic liquid crystal (LC)/C mixture with varying amounts of water. The reaction at relatively low water contents successfully yielded cross-linked Pt nanowires with wire-widths of 2-5 nm. The novel Pt nanostructure is believed to be from poorly hydrated hexagonal domains formed together with layered domains by the phase separation of the precursory LC mixture in the presence of carbon. Electrochemical measurements using cyclic volutammetry and membrane electrode assemblies revealed that the cross-linked nanowired Pt/C composite exhibits fairly high electrocatalytic activity for oxygen reduction reaction, as well as a high performance as the cathode material for polymer electrolyte fuel cells.     

Crack initiation model for sensitized 304 stainless steel in high temperature water

To investigate the initiation behavior of stress corrosion cracking (SCC) for sensitized Type 304 stainless steel in high temperature water, a constant load SCC test method combined with in situ crack observation technique was employed. The in situ crack observation system allowed us to detect small cracks of at least 100 μm. As a result, a fracture time decreased with an increase in an applied stress. The first cracks were observed at most 3 h before the specimen was fractured under all the stress conditions. After that, many cracks were initiated in a short time to fracture. The fracture was caused by coalescence of multiple cracks rather than by growth of some primary cracks. The simulation model for surface crack initiation was newly developed using a Monte Carlo method, which was based on damage mechanics and stress analysis around the existing cracks. The simulation could represent the empirical results of changes in the crack distribution and the cumulative number of cracks during the SCC tests. It was concluded, therefore, that the crack initiation process should be considered in simulating the life prediction of the material in this SCC system.