Effects of pressure and temperature on dyeing acrylic fibres with basic dyes in supercritical carbon dioxide

The dyeing of acrylic fibre with CI Basic Blue 47 has been investigated using an ammonium carboxylate perfluoropolyether as an auxiliary in order to perform the reverse micellar system in supercritical carbon dioxide media. The basic dye was satisfactorily solubilised in the interior of the reverse micelle in the system, and dyeability in the supercritical carbon dioxide media was excellent, even in the absence of a retardant and/or an acid. The optimum proton-rich condition for dyeing of acrylic fabric is performed in reverse micelle aggregates and the proton-rich water pool is suitable for dye uptake by the fibre even without the presence of additives. Changes in glass transition temperature of acrylic fibre in the carbon dioxide media also influence the dyeing behaviour of acrylic fabric.     

Electrochemical formation of AlN in molten LiCl-KCl-Li3N systems

Electrochemical formation of aluminum nitride was investigated in molten LiCl-KCl-Li₃N systems at 723 K. When Al was anodically polarized at 1.0 V (versus Li⁺/Li), oxidation of nitride ions proceeded to form adsorbed nitrogen atoms, which reacted with the surface to form AlN film. The obtained nitrided film had a thickness of sub-micron order. The obtained nitrided layer consisted of two regions; the outer layer involving AlN and aluminum oxynitride and the inner layer involving metallic Al and AlN. When Al electrode was anodically polarized at 2.0 V, anodic dissolution of Al electrode occurred to give aluminum ions, which reacted with nitride ions in the melt to produce AlN particles (1-5 μm of diameter) of wurtzite structure.     

Hemicellulose Composition in Different Cell Wall Fractions Obtained using a DMSO/LiCl Wood Solvent System and Enzyme Hydrolysis

In our previous studies on the relationships between lignin structure and hemicellulose composition in a wide range of hardwood species, we showed that the higher the syringyl ratio, the higher the xylan/mannan ratio. In this study, the relationship of the syringyl ratio and xylan/mannan ratio was further studied using fractions obtained by stepwise extraction of finely milled beech wood by use of aqueous dioxane and subsequent dimethyl sulfoxide (DMSO)/LiCl solvents with increasing LiCl concentration. Each soluble fraction obtained with a different LiCl concentration was compared with the corresponding insoluble residue, and it was shown that both the syringyl ratio and xylan/mannan ratio were always higher in the insoluble fraction. To analyze polysaccharides closely located with lignin, milled wood lignin (MWL), and cellulolytic enzyme lignin (CEL) obtained by enzyme treatment after DMSO/LiCl swelling were investigated. Although the xylan/mannan ratio of MWL was higher, that of CEL with more than 80% lignin yield was lower.     

DIRECT NUMERICAL SIMULATION OF BLUFF BODY FLOWS USING NON-STAGGERED GRIDS

The present authors pointed out in the previous paper [1] that the implicit SMAC scheme is quite efficient and non-staggered grid arrangement can decrease the computational effort and save the storage memory which is very important to the direct numerical simulation (DNS) of complicated 3-D flow fields. But using non-staggered grid arrangement, the pressure field oscillation (PFO) ordinarily occurs and also, the pressure on the solid walls including sharp corners need to be prescribed directly as the pressure boundary conditions.

In this paper, a new interpolation method, which is a modification to Cheng and Armfield's interpolation formulation, is presented in order to completely prevent PFO from occurring, Moreover, a more accurate specification method of wall pressures and special treatment of pressures at sharp corners are proposed. To test the new methods proposed, the DNS of flow past a square cylinder and flows over backward-facing steps, which are typical of the flow fields with sharp corners, is made using the implicit SMAC scheme combined with these methods. The calculated results are compared with the previous experimental and numerical data and show good agreement with them.     

Demulsification of oil-in-water emulsion under freezing conditions: Effect of crystal structure modifier

The demulsification of oil-in-water (O/W) emulsions under freezing conditions is connected to fat crystallization in the oil droplet. Therefore, demulsification can be prevented by the use of oil with a low melting point, and also by lowering the O/W ratio. However, an oil with a low melting point, such as sunflower, is rather expensive, and the O/W ratio has a significant effect on the texture of emulsions. We searched for an oil that is suitable for the production of a freeze-stable emulsion and found that soybean oil has unique characteristics. Normally, emulsions are more unstable at lower temperatures; soybean oil emulsion is unstable at −10°C and stable at −20°C. This unique characteristic results from the following two reasons. First, the solid fat content of soybean oil is almost the same at −10 and −20°C. Second, small crystals form a larger network over a period of time, and the higher temperature promotes faster restructuring. This structure formation was microscopically observed with the use of a thermostated stage. Structure formation was suppressed with the addition of a crystal structure modifier, polyglycerol fatty acid full ester, which also suppressed coalescence.     

Reducing the Photocatalytic Activity of Zinc Oxide Quantum Dots by Surface Modification

The use of zinc oxide (ZnO) nanoparticles as ultraviolet (UV) absorbers for many organic substrates is limited because of the high photocatalytic activity of ZnO. In this study, a facile and efficient technique for the preparation of a hybrid material of silica-coated ZnO nanoparticles was used to reduce the photocatalytic activity of ZnO. Monodispersed ZnO nanopartcles were prepared by wet chemistry and the particle surface was modified by tetraethylorthosilicate to form a silica coating via the Stöber method. ZnO samples, both before and after the coating process, were investigated by transmission electron microscopy, X-ray diffraction, dynamic light scanning, infrared, and UV-Vis absorption spectroscopy. The effect of the surface modification on the photocatalytic activity of ZnO was studied by monitoring the degradation of Rhodamine B caused by photo-generated free radicals. The results implied that the photo-generation of free-radicals was strongly quenched by the presence of silica on the particle surface.     

Synthesis and thermal cure of high molecular weight polybenzoxazine precursors and the properties of the thermosets

High molecular weight polybenzoxazine precursors have been synthesized from aromatic or aliphatic diamine and bisphenol-A with paraformaldehyde. The precursors were obtained as soluble white powder. Molecular weight was estimated from the size exclusion chromatography to be several thousands. The structure of the precursors was confirmed by IR, ¹H NMR and elemental analysis, indicating the presence of cyclic benzoxazine structure. The ratio of the ring-closed benzoxazine structure and the ring-opened structure in the high molecular weight precursor was estimated from ¹H NMR spectrum and also from the exotherm of DSC, showing that the ratio of the ring-closed benzoxazine structure was 77–98%. The precursor solution was cast on glass plate, giving transparent and self-standing precursor films, which was thermally cured up to 240 °C to give brown transparent polybenzoxazine films. The toughness of the crosslinked polybenzoxazine films from the high molecular weight precursors was greatly enhanced compared with the cured film from the typical low molecular weight monomer. Tensile measurement of the polybenzoxazine films revealed that polybenzoxazine from aromatic diamine exhibited the highest strength and modulus. While, polybenzoxazine from longer aliphatic diamine had higher elongation at break. The viscoelastic analyses showed that the glass transition temperature of the polybenzoxazines derived from the high molecular weight precursors were as high as 238–260 °C. Additionally, these novel polybenzoxazine thermosets showed excellent thermal stability.     

Synthesis and Reactions of Organometallic Polymers Containing Titanacyclobutene Units in the Main Chain

A new class of polymers containing titanacyclobutene units in the main chain were prepared by the reaction of organic dihalides (2) with a binuclear titanium propargyl complex (3) generated in situ from bis(pentamethylcyclopentadienyl)titanium chloride (Cp*₂TiCl, 1), SmI₂, and 1,4-bis(3-bromopropynyl)benzene (2a). The dark red colored polymers (4) thus obtained are soluble in organic solvents such as tetrahydrofuran and chloroform, and they are stable at ambient temperature under argon atmosphere. The reaction of the titanium-containing polymers (4) with hydrogen chloride was found to give organic polymers (7) containing unsaturated main chain.     

Micro machining for control of wettability with surface topography

A micro fabrication is presented to manufacture hydrophobic surfaces with micro-scale structures. Hydrophobicity is controlled with the shape and the alignment of micro pillars in the structure. The structures are manufactured in large areas at high production rates in the following processes: (1) the structure is fabricated on a tool by focused ion beam sputtering; (2) the reverse structure is formed on a metal plate by incremental stamping using the structured tool; and (3) the structure is transferred onto plastic plates by molding. A consecutive stamping is also proposed to fabricate several structures on a surface accurately with a structured tool, in which the moving pitch of the structured tool is numerically controlled. The effect of the surface topography on hydrophobicity is discussed with measuring contact angles on the structured surfaces in the water droplet tests. Hydrophobicity on the plastic plate is associated with the solid fraction on the structured surface based on the Cassie–Baxter model. A larger contact angle is observed for a smaller solid fraction of the surface.     

Alteration of substrate specificity of rat neurolysin from matrix metalloproteinase-2/9-type to -3-type specificity by comprehensive mutation

The substrate specificity of rat brain neurolysin was rapidly modified by semirational mutagenesis coupled with a yeast molecular display system. Neurolysin mainly recognizes substrates with sequential six residues close to the scissile bond in polypeptides, cleaving a peptide bond in the center position of the six residues. To alter the recognition of the P2' amino acid of substrates by neurolysin, six residues of neurolysin, Asp467, Arg470, Glu510, Tyr606, Tyr610 and Tyr611, which might be involved in the formation of the neurolysin S2' subsite, were individually and comprehensively substituted. The protein libraries of mutant neurolysins comprising 120 species were displayed on the yeast cell surface and screening was carried out using two fluorescence-quenching peptides, the matrix metalloproteinase-2/9- (MMPs-2/9-) and MMP-3-specific substrates, which consisted of similar amino acids, except for alanine (for MMPs-2/9) or glutamic acid (for MMP-3) at the P2' amino acid position. Among mutant neurolysins, the Y610L mutant neurolysin exhibited a marked change in substrate specificity. Steady-state kinetic analysis of the purified Y610L mutant neurolysin revealed that the binding efficiency toward the MMP-3-specific substrate was about 3-fold higher than that toward the MMP-2/9-specific substrate. These results indicate that Tyr610 of neurolysin is the important residue to recognize the P2' amino acid of substrates.