MgO／Ni系梯度功能材料的设计与制备

对ＭｇＯ／Ｎｉ系梯度功能材料（ＦＧＭ），分别用实验和微观力学模型测定和计算了用于热应力缓和设计的各物性参数。讨论了两种结果之间存在差异的原因。用有限元方法模拟了制备过程中ＦＧＭ的热应力，得到ＭｇＯ／Ｎｉ系ＦＧＭ的综合设计准则。按设计结果进一步调整粉末工艺性质，成功地烧制出ＭｇＯ／Ｎｉ系ＦＧＭ。     

Two possible emission mechanisms involved in the arc discharge method of carbon nanotube preparation

By investigating the morphologies and microstructures of the cathode deposits prepared by self-sustained arc discharge between graphite rods, we consider that there are two electron emission mechanisms occurring on the cathode: field emission and thermionic emission. The former occurs mainly on the edge of the growing surface, by which we can explain the formation of the outer hard shell of the cathode deposit; while the latter occurs mainly on the growing surface except for the edge area and it is the main cause for the growth of carbon nanotubes.     

无机颜料的表面处理

介绍了无机颜料表面处理的作用及实现途径,并对其作用机理进行了分析,还叙述了表面活性剂的选择和处理方式。     

Electrochemical micromachining of nitinol by confined-etchant-layer technique

The confined etchant layer technique has been applied to fabricate complex three-dimensional microstructures on nitinol for the first time. HF and HNO₃ were locally and simultaneously electrogenerated at the mold surface to etch a nitinol workpiece. NaOH was used as an efficient scavenger to confine the etchant close to the mold. Cyclic voltammetry was employed to study the electrochemical behavior of a Pt electrode in the etching solution in order to choose an appropriate potential for etchant generation on the mold. The thickness of the confined etchant layer was estimated to be several micrometers by inspecting the deviation of the sizes of the etched spots from the sizes of those on the microelectrode. Thus, the composition of the electrolyte could be optimized for better etching precision. By optimizing the composition of the electrolyte, complex microstructures on a Pt-Ir mold bearing the logo “XMU” of Xiamen University were successfully fabricated on nitinol. The etched patterns were approximately negative copies of the mold, and the precision of duplication could easily reach the micrometer scale.     

货架喷塑前处理工艺的选择与应用

介绍了CZ99-03(7)常温锌系磷化剂在货架上的应用,根据货架构件的特点,优化货架喷塑前处理工艺,讨论了影响磷化质量的工艺因素,提出了提高磷化效果的措施以及进一步改进磷化工艺的工艺设计。     

探索行动导向教学法在网络架构课程教学改革中的应用

技工学校是以技术型人才培养为目的的学生能力养成和技能操作的教育基地,为确保人才培养质量,学校需要加强对市场形势的把握和教学改革的控制。行动导向教学法是目前广泛应用于技校和职校教学课堂的、有较好实际作用的教学方法,文章以行动导向教学法为重点,以配置交换机实现VLAN学习任务为案例,在教学方法和手段等几个方面讨论了行动导向教学法在网络架构课程教学改革中的研究与实践。     

下期要目

在电气自动控制的设计过程中，设计者根据生产工艺要求和生产控制过程用经验设计法设计出来的控制电路，虽然通过了试验和一定时间的实践验证。但是随着时间的推移，其存在的隐性危害便会逐渐暴露出来，电气自动控制中寄生回路的存在及其隐性危害便是一例。     

聚合转化率对硫调型氯丁胶结构与性能的影响

研究了硫调型氯丁橡胶乳液聚合中转化率对产晶结构与性能的影响.结果表明,随单体转化率的提高,聚合物的凝胶量及其交联密度增大,致使断链速度减慢,所得断链胶的门尼粘度上升,残存凝胶量增加,分子支化程度增大,分子量分布变宽,焦烧时间缩短。而相应硫化胶的拉伸强度、撕裂强度、冲击弹性和硬度等提高,扯断伸长率和永久变形下降。这些变化一般在转化率为80——85％时有明显转折.综合考虑产量与质量,聚合转化率控制在82±2％较为适宜。     

入侵检测技术在消防信息网安全中的应用

消防信息网作为公安网子网,与互联网物理分隔,网络安全相对薄弱,自身的安全防护能力并不高。非法入侵、病毒破坏屡有发生,给消防信息网带来不可预测的后果。     

国外挤出成型加工技术及设备的近期进展

简要评述了国外塑料挤出成型加工技术及设备的近期进展,重点介绍了混炼挤出技术及设备、反应挤出技术及设备以及共挤出成型及设备的发展动向,并列举了国外主要公司的技术成果.