微波介质谐振器介电参数的测量

本文讨论了微波介质谐振器介电参数测试技术。用研制的测试装置对多个介质样品进行了实测，结果表明，本文的分析与实际值是吻合的。该测试技术可对微波介质谐振器的复介电常数进行迅速、准确、可靠、宽频带、无损伤、自动化和批量检测，具有较强的实用性。     

Synchronized chaotic optical communications at high bit rates

Basic issues regarding synchronized chaotic optical communications at high bit rates using semiconductor lasers are considered. Recent experimental results on broadband, high-frequency, phase-locked chaos synchronization, and message encoding-decoding at 2.5 Gb/s are presented. System performance at a bit rate of 10 Gb/s is numerically studied for the application of three encryption schemes, namely chaos shift keying, chaos masking, and additive chaos modulation, to three chaotic semiconductor laser systems, namely the optical injection system, the optical feedback system, and the optoelectronic feedback system. By causing synchronization error in the forms of synchronization deviation and desynchronization bursts, the channel noise and the laser noise both have significant effects on the system performance at high bit rates. Among the three laser systems, the optoelectronic feedback system has the best performance while the optical feedback system has the worst. Among the three encryption schemes, only the performance of additive chaos modulation with low-noise lasers is acceptable at high bit rates.     

45号钢二次枝晶臂间距与冷却速度的关系

本文利用可控平均冷却速度的单向凝固实验炉测定了４５号钢在不同平均冷却速度下的冷却曲线，由此得到其在凝固期间的平均冷却速度Ｒ，相应地测量了不同平均冷却速度下试样的二次枝晶臂间距Ｓ２，通过回归，得到了如下关系式：Ｓ２＝７２７Ｒ－０．４１，并将引式成功地应用于实际生产中。     

锻热淬火工艺对工具钢碳化物粒度的影响

研究了锻热淬火工艺对Ｔ１０钢和ＧＣｒ１５钢碳化物技度的影响。结果表明，碳化物粒度随变形量的增大而细化；终锻温度在高于碳化物析出的温度范围内变化，其碳化物粒度都同样细小；终锻温度不宜过低，否则将使碳化物变粗。     

关于我国二乙胺的生产技术及其发展

概述了乙醇氨解法等二乙胺的六类合成方法及国内外二乙胺的生产情况，指出了我国二乙胺生产技术与国外的差距，提出了扩大生产规模、开发下游产品、开发或引进加压加氢工艺等建议     

High performance CMOS current comparator

A new high-speed CMOS current comparator is described. By changing the buffer of an existing comparator from class B to class AB operation, voltage swings are reduced, resulting in greater speed for small input currents. Simulation results employing a 1.6μm CMOS technology show the response time to a 0.1μA input current to be 11ns and the power dissipation to be 1.4mW, resulting in a five times improvement in speed/power ratio over existing high-speed current comparators     

金刚石薄膜中晶粒尺寸的研究

扫描电子显微研究表明，化学汽相沉积的金刚石薄膜中晶粒大小比较均匀。但随着沉积时间和薄膜厚度的增加，晶粒逐渐变大，且每一层内，存在少量的大金刚石颗粒，讨论了晶粒尺寸变化和大晶粒形成的原因和机制。     

1477 nm LD泵浦掺铒光纤放大器的研究

报道了采用１４７７ｎｍ激光二极管（ＬＤ）泵浦的掺铒光纤放大器的实验结果。研究了放大器的增益和时域特性。对１５２０ｎｍ的信号光，获得了２３ｄＢ的增益，泵浦效率为２．２８ｄＢ／ｍＷ。低频脉冲信号经过放大器后未发生波形畸变。     

精轧油膜轴承密封失效机理的初步分析

对油膜轴承密封出现的进水、漏油现象作了大量的调查、测量和统计分析，找出了产生质量事故的根本原因，提出了解决措施。     

信钢炼钢厂转炉氧枪改造实践

对信钢炼钢厂25t转炉氧枪及喷头存在的缺陷进行分析,结合生产实践,提出了相应的改进措施,提高了冶炼速度,加快炼钢节奏,取得了良好的效果.