Optical properties of O2 − centres in KCl∶NaCl mixed crystals

The optical properties of O₂ ^– centres in KClNaCl mixed crystals were investigated. The timeresolved spectra and the fluorescence decay time are shown. From the measurements of the radiative decay time, the oscillator strength of the absorption,f _ab=0.045, the oscillator strength of the fluorescence,f _fluo=0.019, and the activation energy E=0.22 eV for the O₂ ^– centre in KClNaCl were determined.     

Aging and availability of binocular disparity and pictorial depth cues in 3D graphics contents

Some stereoblind observers do not perceive depth of 3D stimuli that depends on binocular disparity. These individuals, who have no disabilities, comprise over 5% of the general population. In addition, 17–30% of nonstereoblind young and young–middle people do not use disparity information in certain 3D environments, a phenomenon known as pseudo‐stereoblindness. This study aimed to investigate the relationship between aging and the proportion of pseudo‐stereoblindness in the general population. In an experiment, 134 nonstereoblind participants, ranging in age from 17 to 83 years, judged subjective depth of 3D stimuli containing binocular disparity and pictorial depth cues. Results showed that the proportion of pseudo‐stereoblindness among young (17–24 years old) and young–middle aged observers (25–39 years old) was 29%, in both cases. However, the proportion of pseudo‐stereoblind observers increased in older populations: 65% and 82% in the middle (40–54 years old) and senior (55–83 years old) age groups, respectively. These results suggest that a number of people, especially in elderly populations, have trouble perceiving depth from binocular disparity in 3D graphic contents despite their essential ability to use disparity information.     

Radical polymerization of butyl acrylate and random copolymerization of styrene and butyl acrylate and styrene and methyl methacrylate mediated by monospiro- and dispiropiperidinyl-N-oxyl radicals

Radical polymerization of butyl acrylate (BA) and random copolymerizations of styrene (St) and BA and St and methyl methacrylate (MMA) in the presence of 7-aza-15-hydroxydispiro[5.1.5.3]hexadecane-7-yloxyl (1) and 1-aza-2,2-dimethyl-4-hydroxyspiro[5.6]dodecane-1-yloxyl (2) were carried out. Radical polymerization of BA at 120 °C in the presence of 1 gave poly(BA) with M_n=20200 and M_w/M_n=1.30 at 23% conversion. The termination of polymerization observed around ∼20% conversion was solved to a certain extent by an addition of small amounts of dicumyl peroxide, and poly(BA) with M_n=37400 and M_w/M_n=1.33 was obtained in 46% yield. Random copolymerizations of St and BA and St and MMA in the presence of 1 and 2 at 80 °C gave the corresponding random copolymers with narrow polydispersities of 1.12-1.38 at the molar fraction above 0.30 of St in feed. The kinetic study for the NO-C bond homolysis of the corresponding alkoxyamines prepared from 1 and 2 were carried out, and evaluation of the preexponential factors (A_act) and the activation parameters (E_act) showed that the steric factors of the nitroxides are reflected mainly on E_act.     

Oxidation behavior of TiAl coated with a fine-grain Co-30Cr-4Al film

The oxidation behavior of TiAl coupons coated with a fine-grain Co-30Cr-4Al (mass %) film of about 30-m thickness has been studied at 1100–1400 K in a flow of purified oxygen at atmospheric pressure for up to 500 ks. Three oxidation stages were recognized: initial transient, parabolic, and accelerated stages. However, at 1100 K a parabolic stage continues for more than 800 ks. The activation energy for parabolic oxidation agrees with reported values for the oxidation of alumina-former alloys, although the mass gains during the parabolic stages are relatively small at 1200 and 1300 K. Micropores developed mainly at the scale/coating and coating/substrate interfaces as oxidation proceeded. This is attributable to recrystallization of the coating during oxidation and a Kirkendall effect due to preferential diffusion of Co into the substrate. The accelerated oxidation can be explained in terms of the formation of rutile mounds on the scale.     

Water matrix effect on UV photodegradation of perfluorooctanoic acid

The widespread detection of perfluorinated compounds (PFCs) in the water environment has been a concern for the last several years, while effluents from wastewater treatment facilities are the major sources of these compounds. Even advanced oxidation technologies (AOTs) are not useful for mineralization of the compounds due to their very high stability. Photochemical techniques using particularly vacuum UV (VUV) have been found to be very promising in this regard. But the use of VUV in UV-based AOTs has still not progressed much. Moreover, the impact of water quality on PFCs photomineralization is unknown. This investigation aimed to assess photomineralization potentials of perfluorooctanoic acid (PFOA) in ultrapure water (UPW), tap water (TW), surface water and treated wastewater effluent using a reactor setup enabling maximum utilization of VUV emission of low pressure lamp in laboratory batch experiments. Neya River water (NRW) and the Nakahama Wastewater Treatment Plant Effluent (NWWTPE) represented surface water and treated wastewater effluent respectively. Also, tests were carried out in 50% diluted NRW and NWWTPE. PFOA photomineralization in terms of PFOA removal, defluorination and total organic carbon (TOC) removal are discussed. The usefulness of the method for PFOA mineralization in organic-rich wastewaters, and further research needs are also highlighted.     

Sensorless Position Control Using Feedforward Internal Force for Completely Restrained Parallel-Wire-Driven Systems

Generally, point-to-point control for a completely restrained (CR) parallel-wire-driven system requires a balancing internal force to prevent slackening of wires, along with a feedback term based on some displacement sensor. This paper specifically describes CR systems' internal force properties, then presents the possibility of motion convergence at a desired position when the internal force balancing at a position is given as sensorless feedforward input. Subsequently, we use the property of internal force positively for sensorless position control. This positioning method is applicable for low-cost manipulation, which does not require high accuracy, and for emergency positioning of systems when sensors malfunction.     

High-temperature oxidation of Al-deposited stainless-steel foils

The oxidation resistance of Al-deposited Fe–Cr–Al foils containing small amounts of La and Ce was assessed by a cyclic oxidation test with temperature varying between room temperature and 1323 K to 1423 K in static air. (1) The Al content of Fe–Cr–Al–La, Ce foils can be increased by depositing an Al layer from the vapor phase. The deposition of a 1-m-thick Al layer on both sides of the 50-m-thick foil is equivalent to a 1.5 mass% increase in the Al content. The deposited Al diffuses into the foil during heat treatment. The uniform distribution of Al is obtained by heating at 1273 K for 18 ks. (2) After the initial transition stage the oxidation follows the parabolic law until breakaway sets in. The scale consists mainly of -Al₂O₃ during the parabolic period. (3) The increase in the Al content by more than 5 mass% by the Al-deposition remarkably improves high-temperature oxidation resistance (smaller parabolic rate constant and longer protection time). (4) The Al-deposited foils have better oxidation resistance than the conventional foils with the same contents of Al and rare-earth elements. This is attributable to the different nature of the initially formed oxide on the Al-deposited foil. (5) The so-called rare-earth element effect was also observed for the Al-deposited foils. Predominant diffusion of oxygen through the Al₂O₃ scale and vacancy-sink mechanism are applicable to the present results.     

Optical implementation of visible gray-image morphology with the visual-area-coding technique

We present a novel scheme of visible gray-image morphology with the visual-area-coding technique (VACT). The VACT is a technique of digitized analog-optical computing in which data are converted into visible coded patterns and processed with the visible form. Because the achievable operations in the VACT are identical to those of mathematical morphology, mathematical morphology is adapted to gray-image morphology with the VACT. Computer simulation and optical experiments of the several operations in mathematical morphology verify the correctness of the proposed technique. The processing capacity of the proposed method is estimated in terms of the space-bandwidth product.     

A novel interferon regulatory factor family transcription factor, ICSAT/Pip/LSIRF, that negatively regulates the activity of interferon-regulated genes

We have isolated a novel cDNA clone encoding interferon (IFN) consensus sequence-binding protein in adult T-cell leukemia cell line or activated T cells (ICSAT); this protein is the human homolog of the recently cloned Pip/LSIRF. ICSAT is structurally most closely related to the previously cloned ICSBP, a member of the IFN regulatory factor (IRF) family of proteins that binds to interferon consensus sequences (ICSs) found in many promoters of the IFN-regulated genes. Among T-cell lines investigated, ICSAT was abundantly expressed in human T-cell leukemia virus type 1 (HTLV-1)-infected T cells. When the HTLV-1 tax gene was expressed or phorbol myristake acetate-A23187 stimulation was used, ICSAT expression was induced in Jurkat cells which otherwise do not express ICSAT. When the binding of ICSAT to four different ICSs was tested, the relative differences in binding affinities for those ICSs were determined. To study the functional role of ICSAT, we performed cotransfection experiments with the human embryonal carcinoma cell line N-Tera2. ICSAT was demonstrated to possess repressive function over the gene activation induced by IFN stimulation or by IRF-1 cotransfection. Such repressive function is similar to that seen in IRF-2 or ICSBP. However, we have found that ICSAT has a different repressive effect from that of IRF-2 or ICSBP in some IFN-responsive reporter constructs. These results suggest that a novel mechanism of gene regulation by "differential repression" is used by multiple members of repressor proteins with different repressive effects on the IFN-responsive genes.     

Ion-beam processing of single crystal diamond using SOG mask

Various ion-beam etching characteristics of diamond and selectivity between diamond and spin-on-glass (SOG) were examined. The maximum selectivity of diamond and SOG was 12.7 in oxygen reactive ion-beam etching process at 100 V acceleration voltage. Using this etching condition and dot-shaped SOG mask, conical diamond field electron emitter arrays with 30 nm curvature radius, 2.58 μm base radius and 5.86 μm height were fabricated.