试谈低pH值元明粉生产技术

从生产实际出发，通过一系列分析研究，找出了低pH值元明粉的生产方法。     

基于可重构FPGA技术的自适应FIR滤波器的实现

有限冲激响应(FIR)滤波器设计遇到的难题是滤波要进行大量乘法运算,即使是在全定制的专用集成电路中也会导致过大的面积与功耗.对于用硬件实现系数是常量的专用滤波器,可以通过分解系数变为应用加、减和移位而实现乘法.FIR滤波器的复杂性主要由用于系数乘法的加法器/减法器的数量决定.而对于自适应FIR滤波器,大多数场合下可用数字信号处理器(DSP)或CPU通过软件编程的方法来实现,但是对于要求高速运算的场合,VLSI实现是很好的选择.基于这一考虑,可以用符号数的正则表示(CSD)码表示系数, 再利用可重构现场可编程门阵列(FPGA)技术实现.可重构结构的应用,能保证系统的其余部分同时处于运行状态时实现FIR滤波器系数的更新.文中利用CSD码和可重构思想,提出了用FPGA实现自适应FIR滤波器的一种方案.     

通信瓶颈下的实时并行任务分配研究

提出了实时并行任务粒度划分的具体设计方法，采用了系统内通信迟延最小的约束条件进行多处理器上的任务分配，解决了高速实时信号处理中的数据通信瓶颈问题。在自行设计的超立方体结构的通用信号处理机上，实现了空时二维自适应信号处理和SAR实时成像，显著减小了数据通信迟延，提高了并行效率和性价比。     

基于DMF捕获系统频率选择性信道下捕获性能的分析

对基于数字匹配滤波器(DMF)捕获系统在频率选择性信道下的捕获性能进行了深入讨论，利用状态转移图推导出单次驻留判决方式时平均捕获时间的表达式，对平均捕获时间与多径分量的关系进行了数字分析。得出的主要结论是：对于多径分量为非衰落信号时，多径分量之间的能量差别越大，系统捕获性能越好，多径分量的能量相等时，系统捕获性能最差，且随着可以分离的多径路数的增加下降；对于多径分量为慢衰落信号时，多径信道的捕获性能好于单径信道(非频率选择性衰落信道)，且多径分量之间的能量差别越大，系统捕获性能越差，当多径分量的能量相等时，捕获性能最好，这与非衰落信道的情形相反。因此在频率选择性衰落信道中，采用分集接收可以改善系统的捕获性能。     

基于回归方法的移动通信话务量预测

针对移动通信话务量与市场用户和相应资费政策相关的特点，采用回归预测方法，建立了基于市场用户数及每用户收入的话务量预测模型，并对模型进行了经济学意义上的检验。根据此模型，对话务量进行了初步的预测分析。     

化学气相沉积铜薄膜研究进展

本文综术了集成电路工艺的Cu布线中Cu薄膜化学气相沉积(CVD)的研究背景,详细介绍了CVD生长Cu金属薄膜的国内外研究进展及CVD对前趋物的要求,并对前趋物的一些物理、化学性质进行了总结,最后,对薄膜沉积的计算机摸拟作了简要介绍。     

Preparation and characterization of cuprous iodide nanoparticles

A new technique for the preparation of CuI nanoparticles from CuSO₄ and KI ethanol solutions has been developed. Preparation conditions were optimized through a series of experiments. Under these conditions, the yield of CuI reached 95.39%. The product was characterized and the reaction kinetics was studied. The results show that the product takes a roughly spherical shape with an average particle size of less then 50 nm. The activation energy of the formation of CuI is found to be E _a = 0.58 × 10² kJ/mol, and the preexponential factor in the Arrhenius equation is k ₀ = 7.43 × 10¹⁶ mol/(l s). The text was submitted by the authors in English.     

10MW高温气冷实验堆(HTR-10)燃耗测量系统控制方案的改进

基于10MW高温气冷实验堆(HTR-10)的FCA系统及CFC系统的设计原理及运行规程,在不改变FCA系统原有设备部件的前提下,对FCA系统运行逻辑关系进行了优化,改进了原燃耗测量程序,实现了燃耗测量过程的自动运行及测量结果的自动建库.在此基础上,设计了CFC系统与FCA系统PLC的通信协议,实现了燃耗测量流程与控制系统的实时数据通信.上述改进的结果使得燃料装卸流程不再需要另设运行班组,提高了效率,将人为操作的步骤最少化,降低了误操作的可能性.     

Density Measurement of Liquid Ni-Ta Alloys by a Modified Sessile Drop Method

The density of liquid Ni- Ta alloys was measured by using a modified sessile drop method. It is found that the density of the liquid Ni- Ta alloys decreases with the increasing temperature, but increases with the increase of tantalum concentration in the alloys. The molar volume of liquid Ni- Ta binary alloys increases with the increase of temperature ancl tantalum concentration.     

Plasma Sprayed Hydroxyapatite Coatings with Nano-hydroxyapatite Prepared by Ultrasonic Precipitation Process

Nano-particle hydroxyapatite （ HA ） was prepared with a novel ultrasonic precipitation process and the as-prepared nanopowder was used to produce hydroxyapatite （ HA ） coatings on titanium substrate via plasma spraying. The phase and the microstructare of the coating were characterized by X- ray diffraction （XRD） and scanning electron microscopy （SEM）. Results showed that spherical particles could be prepared by ultrasonic precipitation process; and a corresponding dense HA coating with molten surface and low-porosity cross-section structure was acquired. During the plasma spraying process, new phases of Ca3 （ PO4 ）2 and Ca2 P2O7 were generated. After heat-treating at 800℃ for 1 h, the contents of Ca3 （ PO4 ）2 and Ca2 P2O7 decreased while HA content increased. Tensile adhesion tests showed that the plasma sprayed coating prepared with the spherical nanoparticles exhibited high tensile bond strength.