Renewable energy and sustainability

Clean Technologies and Environmental Policy - Renewable energy and sustainable development are widely discussed and highly debated topics. The current and majority opinion is that for sustainable...     

Classification of a bacterial isolate, from pozol, exhibiting antimicrobial activity against several gram-positive and gram-negative bacteria, yeasts, and molds

A bacterial isolate, designated CS93, capable of producing a broad-spectrum antimicrobial compound(s) effective against gram-positive and gram-negative bacteria, yeasts, and molds was isolated from pozol, a fermented maize product. This strain was phenotypically similar to another pozol isolate that was previously designated as Agrobacterium azotophilium by other investigators. By using biochemical, phenotypic, and 16S rRNA sequence analysis, both pozol isolates were identified as members of the genus Bacillus, possibly a variant of Bacillus subtilis. While the antimicrobial compound(s) was initially produced only on a solid medium, parameters were identified for production in broth. The compound(s) was heat stable (121 degrees C for 15 min), exhibited activity over a wide pH range (pH 3 to pH 11), and was inactivated by pronase E. The antimicrobial compound(s) was bactericidal and bacteriolytic against Escherichia coli V517, bacteriostatic against Micrococcus luteus, and fungistatic against Saccharomyces cerevisiae. The inhibitory compound(s) could possibly serve as a food biopreservative.     

Intracerebral haemorrhage in a young adult: consider amphetamine abuse

We present the case of a young female who suffered a massive intracerebral bleed following the ingestion of a small quantity of amphetamine (speed). Physicians should be aware that amphetamine abuse can lead to cerebrovascular events in young adults.     

Acrylic Homo- and Co-polymers Based on 2, 4-dichlorophenyl Methacrylate and 8-quinolinyl Methacrylate

The monomer 2, 4-dichlorophenyl methacrylate (2,4-DMA) was synthesized from 2, 4-dichlorophenol and characterized by conventional methods. The homopolymers of 2,4-dichlorophenyl methacrylate and its copolymers with 8-quinolinyl methacrylate (8-QMA) in different feed ratio were prepared by free radical polymerization using dimethyl formamide (DMF) as a solvent and 2,2-azobis iso butyronitrile (AIBN) as an initiator. The resulting polymers were characterized by using IR spectroscopy. Reactivity ratios of monomer were evaluated using UV-spectroscopy. Average molecular weights and polydispersity were determined by gel permeation chromatography (GPC). Solution viscosity was also obtained. The thermal analysis was carried out using TGA and DSC. The homo- and co-polymers were also tested for their antimicrobial properties against selected microorganism. The metal ion uptake capacity of synthesized copolymers was estimated by batch equilibration method using different metal ion solution under different experimental conditions. It is observed that due to the presence of pendant ester bound quinoline group, the copolymers are capable of adsorbing cations from their aqueous solution.     

The depth profiling of TiO2 pigmented coil coatings using step scan phase modulation photoacoustic FTIR

The depth distribution of a TiO₂ pigment within the polyurethane (PU) coil coatings is investigated using step scan phase modulation photoacoustic (SS-PM-PA) FTIR. Coil coatings with different pigment contents were prepared and the modulation frequency (MF) of the SS-PM-PA FTIR varied to record the depth distribution of the pigment within the coating. The TiO₂ pigment was shown to contribute significantly to the SS-PM-PA FTIR signal. A TiO₂ aggregated region within the topcoat is found close to the topcoat-primer interface and further away from the topcoat surface. A deeper TiO₂ aggregated region can be identified when pigment content is relatively low. The SS-PM-PA FTIR signal shows a considerable contribution from the primer originated signal, provided the TiO₂ pigment content is sufficiently high and the modulation frequency applied is relatively low. SEM cross-section imaging results show a strong correlation of the TiO₂ depth distribution with SS-PM-PA FTIR results, which confirms the applicability of the SS-PM-PA FTIR technique to the depth profiling study of TiO₂ pigmented coil coatings.     

Synthesis of alkyne‐terminated xanthate RAFT agents and their uses for the controlled radical polymerization of N‐vinylpyrrolidone and the synthesis of its block copolymer using click chemistry

Two new alkyne‐terminated xanthate reversible addition‐fragmentation chain‐transfer (RAFT) agents: (S)‐2‐(Propynyl propionate)‐(O‐ethyl xanthate) (X₃) and (S)‐2‐(Propynyl isobutyrate)‐(O‐ethyl xanthate) (X₄) were synthesized and characterized and used for the controlled radical polymerization of N‐vinylpyrrolidone (NVP). X₃ showed better chain transfer ability in the polymerization at 60°C. Molecular weight of the resulted polymer increased linearly with the increase in monomer loading. Kinetics study with X₃ showed the pseudo‐first order kinetics up to 67% monomer conversion. Molecular weight (M_n) of the resulting polymer increased linearly with the increase in the monomer conversion up to around 67%. With the increase in the monomer conversion, polydispersity of the corresponding poly(NVP)s initially decreased from 1.34 to 1.32 and then increased gradually to 1.58. Chain‐end analysis of the resulting polymer by ¹H‐NMR and FTIR showed clearly that polymerization started with radical forming out of xanthate RAFT agent. Living nature of the polymerization was also confirmed from the successful homo‐chain extension experiment and the hetero‐chain extension experiment involving synthesis of poly(NVP)‐b‐polystyrene amphiphilic diblock copolymer. Formed alkyne‐terminated poly(NVP) also allowed easy conjugation to azide‐terminated polystyrene by click chemistry to prepare well‐defined poly(NVP)‐b‐polystyrene block copolymers. Resulting polymers were characterized by GPC, ¹H‐NMR, FTIR, and thermal study. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Enhanced Hydrothermal Resistance of Y‐TZP Ceramics Through Colloidal Processing

Two commercial zirconia powders with 3 mol% of yttria (TZ3YE and TZ3YS, labeled as ZE and ZS, respectively) supplied by Tosoh (Japan) were used for this study. Maximum colloidal stability for ZE was achieved by dispersing the powders in a mixture of water/ethanol of 90:10 (wt/wt) using a sonication probe. The rheological behavior of the suspensions was optimized in terms of solids content ranging from 20 to 33 vol% and sonication time (0–6 min), the best results being obtained after 2 min. ZS samples were prepared to a solids loading of 30 vol% in water dispersing with 2 min‐sonication. Samples obtained by slip casting in plaster molds were used for dynamic sintering studies, and fully dense and nanostructured specimens were obtained at temperatures of 1300°C–1350°C (ZE samples) and 1400°C per 2 h (ZS samples). The Hardness (H) and Young's Modulus (E) properties of the specimens were studied by nanoindentation technique giving 17 and 250 GPa mean values for H and E, respectively. The specimens were then forced to a low‐temperature degradation (LTD) treatment at 130°C for 240 h in steps of 60 h. Raman spectroscopy and nanoindentation results of hydrothermally treated samples showed the absence of transformation from tetragonal to monoclinic phase until 180 h whereas the mechanical properties maintained constant even at the sample surface. After 240 h of LTD, the monoclinic phase was detected on all specimens by Raman peaks centered at 180, 191, and 383 cm^?1. The nanoindentation study revealed an important loss of mechanical features reaching 10 and 175 GPa for H and E, respectively. In the case of the ZS specimens, no monoclinic phase is detected after 240 h of LTD treatment and no decay of E or H is detected. The free defect microstructure reached for the ZS specimen revealed a higher hydrothermal resistance so that it is concluded that the excellent behavior against thermal degradation is possible due to the large uniformity obtained by colloidal processing rather than the particle size of the starting powders.