Controlling the crystallinity and roughness of atomic layer deposited titanium dioxide films

The surface roughness of thin films is an important parameter related to the sticking behaviour of surfaces in the manufacturing of microelectomechanical systems (MEMS). In this work, TiO2 films made by atomic layer deposition (ALD) with the TiCl4-H2O process were characterized for their growth, roughness and crystallinity as function of deposition temperature (110-300 degrees C), film thickness (up to approximately 100 nm) and substrate (thermal SiO2, RCA-cleaned Si, Al2O3). TiO2 films got rougher with increasing film thickness and to some extent with increasing deposition temperature. The substrate drastically influenced the crystallization behaviour of the film: for films of about 20 nm thickness, on thermal SiO2 and RCA-cleaned Si, anatase TiO2 crystal diameter was about 40 nm, while on Al2O3 surface the diameter was about a micrometer. The roughness could be controlled from 0.2 nm up to several nanometers, which makes the TiO2 films candidates for adhesion engineering in MEMS.     

The effect of cooling rate on beef tenderness: The significance of pH at 7 °C

To study the effects of cooling regime on beef tenderness, seven commercial beef slaughterhouses with different cooling regimes were selected to obtain different carcass cooling rates. The pH values and temperatures of 8 M. longissimus dorsi (LD) and M. semimembranosus (SM) muscles from each slaughterhouse were monitored for 30 h. The muscles of the monitored carcasses were excised and vacuum packed for Allo-Kramer shear force (SF) determinations. Samples were kept at 3-4 °C for 5 or 21 d. The slaughterhouses were grouped by their average pH values of the muscles, prevailing at the moment when the temperature of the muscles reached 7 °C. The pH groups for LD were (i) low (5.52-5.63), (ii) medium (5.84-5.97) and (iii) high (6.16-6.17). The highest shear forces were in group (iii), being the toughest: 155-152 N/g, and the lowest in group (i) (the most tender): 108-116 N/g, respectively. The regression equation or the shear force was SF=-295.4+73.0?(pH at 7 °C); (R(2)=87%). There was no significant correlation between the cooling rate and tenderness in SM, indicating that it is difficult to control the tenderness of all muscles using the same cooling regime. The ageing effect was more marked and the variation in the shear forces smaller in the slaughterhouses generating carcasses with low pH values at 7 °C than in those generating high ones. It was concluded that a low cooling rate, or more specifically, the temperature/pH at the onset of rigor mortis, is important for beef tenderness. The pH of LD must fall to values below 5.7 before/when the temperature reaches 7 °C.     

Distribution of microbes in supercritical CO2 extraction of sea buckthorn (Hippopha? rhamnoides) oils

 The distribution of vegetative microbial cells and their spores in a supercritical CO₂ extraction process was studied. The seed and flesh/skin fractions of the press residue of sea buckthorn berries (Hippopha? rhamnoides) from a juice factory were used as raw materials. A pilot-scale extraction plant was operated at 30 MPa at temperatures of 40 and 60°C. The number of yeasts, moulds and bacteria in the pulp/skin fraction, in the extraction residues, in the extracted oils as well as in the water phases separated from the extracted oils was estimated by the spread plate technique. The microbial content of the flesh/skin material was increased in some extractions by the addition of bacterial spores. In general, the extraction process led to a decrease in the bacterial count of the extracted material, whereas no microbial growth was detected in the oils extracted or in the water phases separated from them. Neither yeasts nor moulds were found in any samples after the extraction process. The microbial status of seed oil and flesh/skin oil obtained by industrial-scale CO₂ extraction at 40°C and at 30 MPa before and after gelatine encapsulation remained unchanged. This proves that supercritical CO₂ can be used to manufacture edible oil products free of living micro-organisms and their spores. Received: 14 May 1996     

Selective Hydrolysis of Arabinogalactan into Arabinose and Galactose Over Heterogeneous Catalysts

Abstract  

The application of solid acid catalysts for the production of monomers from hemicelluloses can be one of the key steps in developing the concept of an integrated forest biorefinery. Arabinogalactans (AG) are hemicelluloses which can be extracted on an industrial scale from larch wood species and has a great potential as a sustainable feedstock for bio-based products. Hydrolysis of AG to monomers over acidic heterogeneous catalysts (Smopex-101 and Amberlyst 15) was successfully demonstrated for the first time to selectively produce arabinose as the primary product, followed by the release of galactose without further degradation of the monomers.     

Moth‐eye antireflection coating fabricated by nanoimprint lithography on 1 eV dilute nitride solar cell

We report on the performance of biomimicked antireflection coating applied to dilute nitride solar cell. The coating consists of nanostructures replicating the moth‐eye geometry and has been fabricated by nanoimprint lithography directly within the window layer covering the dilute nitride absorbing junction. The mean reflectivity within the spectral range of 320–1800 nm remains under 5% for incident angles up to 45°. The effect of the coating on the cell performance was assessed by measuring the current–voltage characteristics under simulated solar illumination. A clear performance increase was identified when comparing a solar cell with the moth‐eye coating with a solar cell having a standard SiN_x/SiO₂ coating. Copyright © 2012 John Wiley & Sons, Ltd.     

The effect of oxygen and the reduction temperature of the Pt/Al2O3 catalyst in enantioselective hydrogenation of 1-phenyl-1,2-propanedione

The effect of oxygen and catalyst reduction temperature in enantioselective hydrogenation of 1-phenyl-1,2-propanedione over commercial Pt/Al₂O₃ catalyst was investigated. Dichloromethane was used as solvent. The catalyst was modified in situ with (−)-cinchonidine. Relatively high enantiomeric excesses (65%) of (R)-1-hydroxy-1-phenyl-2-propanone were obtained with the solvent used as received, i.e. containing traces of dissolved oxygen and other impurities. Dichloromethane dissociated partially on the Pt/Al₂O₃ surface causing desorption of methane, ethene and HCl from the catalyst during TPD according to mass spectrometric analysis. Under anaerobic conditions the reaction rate was low giving only about 40% enantiomeric excesses of (R)-1-hydroxy-1-phenyl-2-propanone. When injecting 5 mm³ of oxygen into the reactor a beneficial effect was observed (i.e. higher reaction rate and enantiomeric excess) in comparison with anaerobic conditions. Poisoning effect of oxygen was observed when injecting 500 mm³ of oxygen into the reactor. Effect of catalyst reduction temperature was studied at three different temperatures (170, 400 and 455°C). Highest reaction rates and enantiomeric excesses were obtained with the catalyst reduced at 400°C. Methane was desorbed from the catalyst at temperatures between 263 and 383°C which could be the explanation for the lower activity of the catalyst reduced at 170°C. It was demonstrated that small amounts of oxygen can have a beneficial effect in enantioselective hydrogenation of 1-phenyl-1,2-propanedione and also that catalyst reduction temperature plays an important role in obtaining high enantiomeric excesses.     

Using Analog Predistortion for Linearizing Class A–C Power Amplifiers

An analog 5th order, complex-valued polynomial predistortion IC has been built to linearize the behavior of RF power amplifiers. The predistorter can be used either at baseband or low IF frequencies and it was tested using a simple IF amplifier that could be biased to operate in classes A, AB, B and C. Intermodulation products can be reduced by 20 to 30 dB in classes A and AB over a bandwidth of several MHz. In classes B and C the shape of nonlinearity is such that a low-order polynomial predistortion function is not sufficient for linearizing them.