Effects of slip and heat transfer on the peristaltic flow of a third order fluid in an inclined asymmetric channel

The present investigation is concerned with the peristaltic flow of an incompressible and magnetohydrodynamic MHD third order fluid in an inclined asymmetric channel. Both thermal and velocity slip conditions have been taken into account. The channel walls are maintained at different temperatures. The governing differential systems subjected to their boundary conditions have been solved for small Deborah number. In the derived solution expressions, the long wavelength and low Reynolds number assumptions are utilized. Graphical results are presented for the pressure rise, longitudinal velocity and temperature. Comparison with the previous published work regarding viscous fluid and no-slip case is performed. Pumping and trapping phenomena are displayed graphically just to examine the various interesting aspects of the present work.     

Effects of slip conditions on stretching flow with ohmic dissipation and thermal radiation

The present work addresses the magnetohydrodynamic (MHD) flow and heat transfer over a permeable stretching sheet. Analysis has been carried out in the presence of thermal radiation and ohmic dissipation. The velocity and thermal slip effects are given main attention. The Rosseland approximation is used to describe the radiative heat flux in the energy equation. The non‐linear partial differential equations are reduced to a set of non‐linear ordinary differential equations which are solved analytically by the homotopy analysis method (HAM). The effects of emerging physical parameters on the velocity and temperature profiles are interpreted. Numerical data for skin friction coefficient and Nusselt number have been tabulated for various values of the parameters. The results have been compared with the known exact solution from the literature in a limiting sense. © 2011 Wiley Periodicals, Inc. Heat Trans Asian Res; Published online in Wiley Online Library ( wileyonlinelibrary.com/journal/htj ). DOI 10.1002/htj.20367     

The impact of the Internet on the social lives of users: A representative sample from 13 countries

One of the most vociferous criticisms of the Internet has always been that it contributes to loneliness among its users. This study analyses results from the World Internet Project, comprised of representative samples from 13 countries (22,002 participants). Thus creating an exceptional international representative sample. In analyzing those results, we argue that in order to achieve a comprehensive understanding of the Internet’s influence over individuals’ social lives; it is essential to consider the different types of social connections that might be influenced by the Internet. We assess the influence of Internet use over social interactions in separate life domains (e.g. with family members; friends; colleagues). Our analysis confirms that Internet usage can actually enhance the social lives of its users. Qualifications to the research are discussed while highlighting the different life domains in which we found significant correlations between Internet usage and increased social interactions.     

Statistical algorithm for nonuniformity correction in focal-plane arrays.

A statistical algorithm has been developed to compensate for the fixed-pattern noise associated with spatial nonuniformity and temporal drift in the response of focal-plane array infrared imaging systems. The algorithm uses initial scene data to generate initial estimates of the gain, the offset, and the variance of the additive electronic noise of each detector element. The algorithm then updates these parameters by use of subsequent frames and uses the updated parameters to restore the true image by use of a least-mean-square error finite-impulse-response filter. The algorithm is applied to infrared data, and the restored images compare favorably with those restored by use of a multiple-point calibration technique.     

The effects of the welding current on heat input,nugget geometry,and the mechanical and fractural properties of resistance spot welding on Mg/Al dissimilar materials

Investigating the joining capability of magnesium AZ31 alloy sheets and aluminium 1350 alloy sheets with the application of resistance spot welding was the objective of this study. The weld current values used in the welding process of Al–Mg sheets were 22, 23, 25, 27, 29, 31, and 33 kA. The studies examined the nugget geometries of joined specimens, recorded the scanning electron microscopy (SEM) images of the welded zone and the fracture surface, and recorded the energy-dispersive spectroscopy (EDS, semi-quantitative) analyses. The results of the experiment confirmed that nugget geometry was different for the Al and Mg sides. Tensile shear tests carried out on the welded joints determined their strength and failure mode. The increase in the weld current and duration resulted in an increase in the nugget size and the weld strength. According to observations, the tensile load bearing capacity (TLBC) increased up to 29 kA of the weld current value. It was also found that tearing during fracture occurred in two different ways.     

A mathematical simulation of unsteady MHD Casson nanofluid flow subject to the influence of chemical reaction over a stretching surface: Buongiorno's model

In this study, unsteady boundary layer flow with Casson nanofluid within the sight of chemical reaction toward a stretching sheet has been analyzed mathematically. The fundamental motivation behind the present examination is to research the influence of different fluid parameters, in particular, Casson fluid $\beta (0.2\le \beta \le 0.4)$, thermophoresis $Nt(0.5\le Nt\le 1.5)$, magnetohydrodynamic $M(3.0\le M\le 5.0)$, Brownian movement $Nb(0.5\le Nb\le 2.0)$, Prandtl numberty, unsteadiness parameter $A(0.10\le A\le 0.25)$, chemical reaction parameter $\gamma (0.1\le \gamma \le 0.8)$, and Schmidt number $Sc(1.0\le Sc\le 3.0)$ on nanoparticle concentration, temperature, and velocity distribution. The shooting procedure has been adopted to solve transformed equations with the assistance of Runge–Kutta Fehlberg technique. The impact of different controlling fluid parameters on flow, heat, and mass transportation are depicted in tabular form and are shown graphically. Additionally, values of skin friction coefficient, Nusselt number, and Sherwood number are depicted via tables. Present consequences of the investigation for Nusselt number are related with existing results in writing by taking $Nb=0$ and $Nt=0$ where results are finding by utilization of MATLAB programming. Findings of current research help in controlling the rate of heat and mass aspects to make the desired quality of final product aiding manufacturing companies and industrial areas.     

Recursive least squares estimation methods for a class of nonlinear systems based on non-uniform sampling

Many dynamic processes in practice have nonlinear characteristics and must be described by using nonlinear models. It remains to be a challenging problem to build the models of such nonlinear systems and to estimate their parameters. This article studies the parameter estimation problem for a class of Hammerstein-Wiener nonlinear systems based on non-uniform sampling. By means of the auxiliary model identification idea, an auxiliary model-based recursive least squares algorithm is derived for the systems. In order to enhance the computational efficiency, an auxiliary model-based hierarchical least squares algorithm is proposed by utilizing the hierarchical identification principle. The simulation results confirm the effectiveness of the proposed algorithms.     

基于水溶性PEG/PMMA黏结剂的316L不锈钢注射成形研究

目的 针对316L不锈钢注射成形,研究一种环境友好型的水溶性黏结剂,并探究水脱脂温度对PEG脱除率的影响。方法 配置不同PEG/PMMA比例的黏结剂,通过成形后的形貌及SEM确定黏结剂的比例,对成形完整的生坯进行流变性能测试,最后将生坯放入水浴锅中脱脂,通过SEM观察形貌。结果 通过注射成形得出76%（质量分数,下同）PEG、79%PEG和82%PEG 3种喂料能够注出完整的生坯,同时根据SEM观察发现316L不锈钢粉末被黏结剂均匀包裹。在160℃、剪切速率102～105 s-1条件下,3种喂料黏度均低于1 000 Pa·s,符合注射成形的要求。在生坯脱脂过程中,PEG脱除率随着脱脂温度的升高而升高。PEG的脱除使生坯内部形成大量孔隙,有利于后续热脱脂与预烧结的进行。结论 与其他成分相比,成分为79%PEG+19%PMMA+5%SA的黏结剂喂料具有较好的流动性,适合注射成形,成形出的生坯形貌完整,内部孔洞较少,并且经过脱脂后仍能保持原始形状,无外部缺陷。生坯在60℃水温下脱脂,PEG脱除率最大,经过10 h脱脂后PEG脱除率达到80%。     

Suggestion Mining from Opinionated Text of Big Social Media Data

Social media data are rapidly increasing and constitute a source of user opinions and tips on a wide range of products and services. The increasing availability of such big data on biased reviews and blogs creates challenges for customers and businesses in reviewing all content in their decision-making process. To overcome this challenge, extracting suggestions from opinionated text is a possible solution. In this study, the characteristics of suggestions are analyzed and a suggestion mining extraction process is presented for classifying suggestive sentences from online customers’ reviews. A classification using a word-embedding approach is used via the XGBoost classifier. The two datasets used in this experiment relate to online hotel reviews and Microsoft Windows App Studio discussion reviews. F1, precision, recall, and accuracy scores are calculated. The results demonstrated that the XGBoost classifier outperforms—with an accuracy of more than 80%. Moreover, the results revealed that suggestion keywords and phrases are the predominant features for suggestion extraction. Thus, this study contributes to knowledge and practice by comparing feature extraction classifiers and identifying XGBoost as a better suggestion mining process for identifying online reviews.     

The low process yield of some PNP power transistors

A study is presented of the symptoms of the devices in a slice of PNP power transistors with a poor yield. The failure modes over the slice are analysed. In specific areas the electrical characteristics and optical appearance of the devices were studied and failure statistics are presented. The low yield is ascribed to cracks in the phosphosilicate glass used for the base diffusion. The effect of these cracks is just visible in the optical and scanning electron microscope.