Candidate Genes and Proteomic Biomarkers of Serum and Urine in Medication-Overuse Headache

Chronic headache is a topical problem of neurology, psychiatry and general practice. The medication-overuse headache (MOH) is one of the leading pathologies in the structure of chronic headache. However, early diagnosis of the MOH is challenging. We analyzed potential proteomic biomarkers of serum and urine in patients with MOH. Methods: We searched PubMed, Springer, Scopus, Web of Science, ClinicalKey, and Google Scholar databases for English publications over the past 10 years using keywords and their combinations. Results: We found and analyzed seven studies that met the search criteria for the purpose of the review, including 24 serum proteomic biomarkers and 25 urine proteomic biomarkers of MOH. Moreover, the candidate genes and locus of the studied serum (vitamin D-binding protein, lipocalin-type prostaglandin D2 synthase, apolipoprotein E, etc.) and urine proteomic biomarkers (uromodulin, alpha-1-microglobulin, zinc-alpha-2-glycoprotein, etc.) of MOH are presented in this review. Conclusions: The serum and urine proteomic biomarkers of MOH can potentially help with the identification of patients with MOH development. Due to the relevance of the problem, the authors believe that further investigation of the MOH proteomic biomarkers in different ethnic and racial groups of patients with primary headache is necessary. In addition, it is important to investigate whether medications of different drug classes influence the levels of serum and urine proteomic biomarkers.     

Optical coating design algorithm based on the equivalent layers theory

New optical coating design algorithm with the equivalent layers theory is presented. The algorithm is based on the merit-function-constrained optimization in the accessible domain of equivalent phase thicknesses and equivalent refractive indices. It allows for creation of design coatings with sophisticated narrowband spectral characteristics. (     

On the reliability of reverse engineering results

Determination of actual parameters of manufactured optical coatings (reverse engineering of optical coatings) provides feedback to the design-production chain and thus plays an important role in raising the quality of optical coatings production. In this paper, the reliability of reverse engineering results obtained using different types of experimental data is investigated. Considered experimental data include offline normal incidence transmittance data, offline ellipsometric data, and online transmittance monitoring data recorded during depositions of all coating layers. Experimental data are obtained for special test quarter-wave mirrors with intentional errors in some layers. These mirrors were produced by a well-calibrated magnetron-sputtering process. The intentional errors are several times higher than estimated errors of layer thickness monitoring, and the reliability of their detection is used as a measure of reliability of reverse engineering results. It is demonstrated that the most reliable results are provided by online transmittance data.     

Analysis of microstructure and microhardness of Zr-2.5Nb processed by High-Pressure Torsion (HPT)

Nanostructured materials have been widely studied due to the improvement of their mechanical properties comparing to those of coarse grain materials. The present work intended to analyze the microstructure and microhardness of Zr-2.5Nb processed by high-pressure torsion (HPT), one of the severe plastic deformation techniques. The deformations were carried out at room temperature using a pressure of 5?GPa and 5 anvil turns. Vickers indentation was used to evaluate the microhardness of the samples. Transmission electron microscopy and X-ray diffraction were used to analyze the microstructure. The results showed a significant refinement from the initial microstructure achieving nanometric grain size around 50?nm and phase transformation α?→?ω?+?β_I induced by shear. The Vickers microhardness values of the material submitted to HPT technique were significantly higher than those of non-deformed material. Also, HPT procedure resulted in a huge grain refinement of the material and in phase transformation.     

Induced ferromagnetism in helium bombarded graphite

Irradiation with helium ions is an effective method for triggering ferromagnetism in graphite. Chemical inertness of helium suggests that local magnetic moment formation is determined solely by the intrinsic carbon defects created during the target damage. Interacting moments are located in two places: in the vicinity of the sample surface and near the point of maximum defect generation.     

Migration of specific planar grain boundaries in bicrystals: application of magnetic fields and mechanical stresses

Recent research on the dynamics of planar grain boundaries is reviewed. Novel measuring techniques developed for in situ observation and recording of magnetically and stress driven grain boundary migration are presented. The results of migration measurements obtained on bismuth, zinc and aluminum bicrystals are addressed. The experiments revealed that the inclination of a 〈112〉 tilt boundary in Bi has a very strong influence on its mobility. The migration of planar 〈10$ \bar 1 $ \bar 1 0〉 tilt grain boundaries with different misorientation angles was measured in situ in bicrystals of high purity zinc. The results proved that there is a pronounced misorientation dependence of grain boundary mobility in the investigated angular range. The shear stress induced migration of planar symmetric 〈100〉 tilt boundaries in aluminum bicrystals was observed to be accompanied by a lateral translation of the adjacent grains. The coupling between boundary motion and shearing is not confined to low angle and some low Σ high angle boundaries, but occurs also for noncoincidence high angle 〈100〉 tilt boundaries. It has been found that also for stress induced grain boundary motion there is a misorientation dependence of the migration activation parameters. Lower values of the activation enthalpy and the pre-exponential mobility factor can be associated with boundaries with tilt angles close to low Σ CSL orientation relationships.     

Role of Self-Organization of Dislocations in the Onset and Kinetics of Macroscopic Plastic Instability

The present paper examines two aspects of the problem of critical conditions of jerky flow in alloys, or the Portevin–Le Chatelier (PLC) effect. Recent development of dynamic strain aging (DSA) models proved their capacity to qualitatively reproduce complex non-monotonic behavior of the critical strain, providing that the parameters of theory are allowed to depend on strain. Experimental measurements of such strain dependences have been realized for the first time and used to revise the predictions of the critical strain and stress relaxation kinetics upon abrupt strain-rate changes. On the other hand, it is usually omitted from consideration that the PLC stress serrations can last very short time in comparison with the characteristic time of stress transients. The development of stress drops was studied with the aid of the acoustic emission (AE) technique. It is shown that such macroscopic instabilities are caused by clustering of AE events which otherwise occur all the time, including the periods of smooth plastic flow. The role of synchronization of dislocation avalanches in the development of abrupt stress serrations and its relationship with the predictions of the local DSA models is discussed.     

Indium doped niobium phosphates as intermediate temperature proton conductors

Indium doped niobium phosphates were prepared from precursors of trivalent indium oxide, pentavalent niobium oxide and phosphoric acid. The obtained materials were characterized by X-ray diffraction, impedance spectroscopy, FT-IR spectroscopy and scanning electron microscopy. It was found that the indium doping promoted formation of the cubic Nb₂P₄O₁₅ phase instead of the monoclinic Nb₅P₇O₃₀ phase in the pristine niobium phosphates and enhanced the preservation of OH functional groups in the phosphates. The preserved OH functionalities in the phosphates after the heat treatment at 650 °C contributed to the anhydrous proton conductivity. The Nb_0.9In_0.1 phosphate exhibited a proton conductivity of five times higher than that of the un-doped analog at 250 °C. The conductivity was stabilized at a level of above 0.02 S cm⁻¹ under dry atmosphere at 250 °C during the stability evaluation for 3 days.     

Deep HDS over NiMo/Zr-SBA-15 catalysts with varying MoO3 loading

In the present work, with the aim of searching for new, highly effective catalysts for deep HDS, a series of NiMo catalysts with different MoO₃ loadings (6–30 wt.%) was prepared using SBA-15 material covered with ZrO₂-monolayer as a support. Prepared catalysts were characterized by N₂ physisorption, small- and wide-angle XRD, UV–vis diffuse reflectance spectroscopy, temperature-programmed reduction, SEM-EDX and HRTEM, and their catalytic activity was evaluated in the 4,6-dimethyldibenzothiophene hydrodesulfurization (HDS). It was observed that ZrO₂ incorporation on the SBA-15 surface improves the dispersion of the Ni-promoted oxidic and sulfided Mo species, which were found to be highly dispersed, up to 18 wt.% of MoO₃ loading. Further increase in metal charge resulted in the formation of MoO₃ crystalline phase and an increase in the stacking degree of the MoS₂ particles. All NiMo catalysts supported on ZrO₂-modified SBA-15 material showed high activity in HDS of 4,6-DMDBT. The best catalyst having 18 wt.% MoO₃ and 4.5 wt.% NiO was almost twice more active than the reference NiMo/γ-Al₂O₃ catalyst. High activity of NiMo/Zr-SBA-15 catalysts and its evolution with metal loading was related to the morphological characteristics of the MoS₂ active phase determined by HRTEM.