Poly(L‐lactide). X. Enhanced surface hydrophilicity and chain‐scission mechanisms of poly(L‐lactide) film in enzymatic,alkaline, and phosphate‐buffered solutions

Attempts were carried out to enhance the surface hydrophilicity of poly(L ‐lactide), that is, poly(L ‐lactic acid) (PLLA) film, utilizing enzymatic, alkaline, and autocatalytic hydrolyses in a proteinase K/Tris–HCL buffered solution system (37°C), in a 0.01N NaOH solution (37°C), and in a phosphate‐buffered solution (100°C), respectively. Moreover, its chain‐scission mechanisms in these different media were studied. The advancing contact‐angle (θ_a) value of the amorphous‐made PLLA film decreased monotonically with the hydrolysis time from 100° to 75° and 80° without a significant molecular weight decrease, when enzymatic and alkaline hydrolyses were continued for 60 min and 8 h, respectively. In contrast, a negligible change in the θ_a value was observed for the PLLA films even after the autocatalytic hydrolysis was continured for 16 h, when their bulk M_n decreased from 1.2 × 10⁵ to 2.2 × 10⁴ g mol^?1 or the number of hydrophilic terminal groups per unit weight increased from 1.7 × 10^?5 to 9.1 × 10^?5 mol g^?1. These findings, together with the result of gravimetry, revealed that the enzymatic and alkaline hydrolyses are powerful enough to enhance the practical surface hydrophilicity of the PLLA films because of their surface‐erosion mechanisms and that its practical surface hydrophilicity is controllable by varying the hydrolysis time. Moreover, autocatalytic hydrolysis is inappropriate to enhance the surface hydrophilicity, because of its bulk‐erosion mechanism. Alkaline hydrolysis is the best to enhance the hydrophilicity of the PLLA films without hydrolysis of the film cores, while the enzymatic hydrolysis is appropriate and inappropriate to enhance the surface hydrophilicity of bulky and thin PLLA materials, respectively, because a significant weight loss occurs before saturation of θ_a value. The changes in the weight loss and θ_a values during hydrolysis showed that exo chain scission as well as endo chain scission occurs in the presence of proteinase K, while in the alkaline and phosphate‐buffered solutions, hydrolysis proceeds via endo chain scission. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1628–1633, 2003     

Polymerization behavior of methylol-functional benzoxazine monomer

This study focuses on methylol functional benzoxazines as precursors to build a network structure utilizing both benzoxazine and resole chemistry. The first part is a review of systems that contain methylol groups which play a role on their crosslinking formation. The polymerization mechanism and properties of resoles will be highlighted as the most abundant polymers that are characterized by polymerization through condensation reaction of methylol group. In the second part, the effect of incorporating methylol group into benzoxazine monomers is studied. Differential scanning calorimetry (DSC) is used to study the effect of methylol group on the rate of polymerization. Kissinger and Ozawa methods using non-isothermal DSC at different heating rates show that methylol monomer exhibits lower average activation energy compared to the un-functionalized monomer. The effect of adding catalysts into the monomers is also studied. p-Toluene sulfonic acid (PTSA) is found to be more efficient than 1-methyl-imidazole (IMD) and lithium iodide (LiI) in the case of methylol monomer due to its ability of accelerating both the methylol condensation and ring-opening polymerization. Additionally, thermal behavior of the monomers is studied using thermogravimetric analysis (TGA).     

A New Slip Frequncy Detector of an Induction Motor Utilizing Rotor Slot Harmonics

A method to detect slip frequency from rotor slot harmonics of a three-phase squirrel-cage induction motor is proposed. The rotor slot harmonic voltage Is obtained by summing the three phase voltages, and after being sampled with a multiple of the stator frequency, it is changed into slip frequency waves, from which a voltage proportional to the slip frequency is obtained. Sophisticated sampling techniques allow elimination of the third harmonic voltage induced in the sum of the three-phase voltages and also allow reduction of time constant of the slip frequency detector. Expenmental results show that the slip frequency detector has a good linearity in the range of slip frequency of about -50 to +30 percent of the stator frequency.     

An IR study on ion-specific and solvent-specific swelling of poly(N-vinyl-2-pyrrolidone) gel

Swelling degrees of poly(N-vinyl-2-pyrrolidone) (PVP) gel were measured in aqueous salt solutions and in water/organic solvent mixtures to find marked ion- and solvent-specificities. In order to investigate any correlation of those specificities with hydration or solvation of PVP, IR spectra band of the CO group was monitored by means of ATR method both for PVP gel and the relevant solution systems. Dependence of the peak frequency on the swelling ratio suggested that hydration of PVP carbonyl group in deswollen gel systems is different from that in the corresponding solution systems. In the solution systems, PVP carbonyl band showed a high-wavenumber shift for deswollen systems, which can be well correlated with changes in water proton charge through ionic hydration and with Gutmann's acceptor number of organic solvents. In the deswollen gel systems, the CO band showed a low-wavenumber shift, suggesting a strong hydration or doubly hydrated state. This unexpected behavior was interpreted by assuming an intermolecular hydrogen bond of two carbonyl groups intermediated by water molecules.     

Thermal decomposition processes in aromatic amine-based polybenzoxazines investigated by TGA and GC-MS

Three different aromatic amine-based polybenzoxazines are subjected to thermal decomposition in a thermogravimetric analyzer. The degradation products, which are volatile compounds evaporating out of the furnace as gases, are trapped and analyzed further by a gas chromatograph which is coupled with a mass selective detector (GC-MS). All the degradation products are separated by GC and come out at different retention times, as seen in the total ion chromatogram. All the compound's mass are selectively identified by MS. The chromatograms are divided into two regions; the low column temperature region containing low molecular weight and highly volatile compounds, and the high column temperature region containing higher molecular weight and less volatile compounds. The evolved gas analysis performed by GC-MS allows us to identify the molecular weight and also the structure of the volatiles. This information is then used to illustrate the processes occurring during the thermal decomposition of aromatic amine-based polybenzoxazines.     

采用MAMMOS技术的高密度光记录

MAMMOS(Magnetic Amplifying Magneto－ Optical System:磁畴扩大磁光系统 )是实现高密度磁光盘的有效方法。不仅能得到不依赖于磁畴长度的较大的读出信号振幅,而且还能实现超出光学系统衍射极限的分辨率。过去,为实现磁畴的复印与扩大,要对记录膜面施加垂直方向的外部磁场。而现在得知,同时施加垂直磁场和水平方向的磁场,可大幅度地提高微小磁畴的读出特性。确认采用施加水平磁场的方法,在λ =635 nm, NA=0.55的条件下, 0.15μ m的连续磁畴也能获得 BER=2× 10－ 4的读出效果。     

陶瓷色料中添加发色离子的状态与反应

固体滴定法是研究固溶量的一种新方法。本实验选择Mn-Al2O3色料,给其中加入Cr2O3,通过测定反射光谱f(R)、晶格常数、电子自旋共振（ESR）,并计算晶格常数,分别得到加入Cr2O3前后的Mn-Al2O3的反射光谱与晶格常数的变化,依据该数据来推定着色离子Mn的固溶量及化学状态。为研究Mn-Al2O3红色料中Mn的固溶量,给其中加入Cr2O3,它使Mn-Al2O3红的色调发生变化,在此过程中发生如下反应：Cr^3 Mn^3 →Cr^4 Mn^2 ,Mn-Al2O3红色料在反射光谱520nm处有吸收峰值,给其中添加Cr2O3后峰值减小,用Cr^3 的固溶量（即Cr2O3的添加量）和峰值Δf(R)作图并延伸图线至Δf(R)=0点,此点对应的Cr2O3值即为Mn^3 的固溶量（Mn2O3的浓度）。实验证明,利用固体滴定法在一定精度范围内测定发色元素的固溶量取得一定程度成功。锰红色料中的发色离子状态为Mn^3 ,添加Cr2O3后,Cr能置换Mn-Al2O3中的Mn。铬是以Cr^3 化学状态固溶到Al2O3中的。     

EXPERIMENTAL STUDIES ON A NOVEL CHEMICAL HEAT PUMP DRYER USING A GAS-SOLID REACTION

The authors have been studying Chemical Heat Pumps (CHP) from the viewpoints of energy saving and environmental impact. The CHP can store thermal energy in the form of chemical energy by an endothermic reaction, and release it at various temperature levels during heat demand periods by exo/endothermic reactions. The authors have proposed in an earlier study a novel chemical heat pump (CHP) system for environmentally-friendly effective utilization of thermal energy in drying as a chemical heat pump dryer (CHPD). In this exploratory study, we test the effectiveness of operating the proposed CHPDs experimentally. Basic experiments on the CHPDs such as hot dry air production for convective drying are performed on lab-scale CHPD apparatuses using gas-solid reactions in calcium oxide/calcium hydroxide reactant beds. The proposed CHPDs are found to produce hot air by CHP operation for drying. The temperature levels of the produced hot air and the reaction rates/conversions are as good as in the case of hot water supply system using basically same CHP operation. The cold heat for air dehumidification is also found to be generated/recovered by the same CHPD system. The generated heat amounts can be increased by changing the operating conditions although the heat recovery must be enhanced for practical application of CHPDs.     

Kinetically Stable Bicelles with Dilution Tolerance,Size Tunability,and Thermoresponsiveness for Drug Delivery Applications

Mixtures of a phospholipid (1,2‐dipalmitoyl‐sn‐glycero‐3‐phosphatidylcholine, DPPC) and a sodium‐cholate‐derived surfactant (SC‐C₅) at room temperature formed phospholipid bilayer fragments that were edge‐stabilized by SC‐C₅: so‐called “bicelles”. Because the bilayer melting point of DPPC (41 °C) is above room temperature and because SC‐C₅ has an exceptionally low critical micelle concentration (<0.5 mm ), the bicelles are kinetically frozen at room temperature. Consequently, they exist even when the mixture is diluted to a concentration of 0.04 wt %. In addition, the lateral size of the bicelles can be fine‐tuned by altering the molar ratio of DPPC to SC‐C₅. On heating to ≈37 °C, the bicelles transformed into micelles composed of DPPC and SC‐C₅. By taking advantage of the dilution tolerance, size tunability, and thermoresponsiveness, we demonstrated in vitro drug delivery based on use of the bicelles as carriers, which suggests their potential utility in transdermal drug delivery.