Effects of reducing and oxidizing atmospheres on the PTCR characteristics of porous n-BaTiO3 ceramics by adding polyethylene glycol

Donor doped BaTiO₃ (n-BaTiO₃) ceramics were fabricated by adding polyethylene glycol (PEG) at 20 wt %. The effects of reducing and oxidizing atmospheres on the PTCR characteristics of the porous n-BaTiO₃ ceramics were investigated. The PTCR characteristics of the porous n-BaTiO₃ ceramics is strongly affected by chemisorbed oxygen at the grain boundaries and are recovered as the atmosphere is changed from the reducing gas to oxidizing gas. The low room-temperature resistivity of the porous n-BaTiO₃ ceramics in reducing atmospheres may be caused by the decrease in potential barrier height, which originates from an increase in the number of electrons owing to the desorption of chemisorbed oxygen atoms at the grain boundaries. In addition, the high room-temperature resistivity of the porous n-BaTiO₃ ceramics in oxidizing atmospheres may be caused by the increase in potential barrier height, which results from the adsorption of chemisorbed oxygen atoms at the grain boundaries.     

Curvilinear fatigue crack reliability analysis by stochastic boundary element method

In this paper, the stochastic boundary element method, which combines the mixed boundary integral equations method explored in Reference 1 with the first-order reliability method, is developed to study probabilistic fatigue crack growth. Due to the high degree of complexity and non-linearity of the response, direct differentiation coupied with the response-surface method is employed to determine the response gradient. Three random processes, the mode I and mode II. stress intensity factors and the crack direction angle, are included in the expression of the response gradient. The sensitivity of these random processes is determined using a first-order response model. An iteration scheme based on the HL-RF method² is applied to locate the most probable failure point on the limit-state surface. The accuracy and efficiency of the stochastic boundary element method are evaluated by comparing the cumulative distribution function of the fatigue life obtained with Monte Carlo simulation. The reliability index and the corresponding probability of failure are calculated for a fatigue crack growth problem with randomness in the crack geometry, defect geometry, fatigue parameters and external loads. The response sensitivity of each primary random variable at the design point is determined to show its role in the fatigue failure. The variation of each primary random variable at the design point with the change of probability of failure is also presented in numerical examples.     

Still image coding based on vector quantization and fractalapproximation

In this paper, we propose a coding algorithm for still images using vector quantization (VQ) and fractal approximation, in which low-frequency components of an input image are approximated by VQ, and its residual is coded by fractal mapping. The conventional fractal coding algorithms indirectly used the gray patterns of an original image with contraction mapping, whereas the proposed fractal coding method employs an approximated and then decimated image as a domain pool and uses its gray patterns. Thus, the proposed algorithm utilizes fractal approximation without the constraint of contraction mapping. For approximation of an original image, we employ the discrete cosine transform (DCT) rather than conventional polynomial-based transforms. In addition, for variable blocksize segmentation, we use the fractal dimension of a block that represents the roughness of the gray surface of a region. Computer simulations with several test images show that the proposed method shows better performance than the conventional fractal coding methods for encoding still pictures.     

A 44-GHz monolithic waveguide plane-wave amplifier with improvedunit cell design [using pHEMTs]

A 44-GHz monolithic waveguide plane-wave amplifier (PWA) with improved unit cell design is presented in this paper. The unit cell is a two-stage direct-coupled design and satisfies size, bistability, and stability requirements of the waveguide PWA. The ultra-compact unit cell had a cell size of 0.8 mm², and showed a small-signal gain of 8 dB and an output power of 15 dBm at 44 GHz with a corresponding dc-to-RF efficiency of 10%. A monolithic waveguide PWA using these unit cells showed a “flange-to-flange” gain of 5 dB, an output power of 0.3 W, and an efficiency of 2% at 44 GHz     

Rooster testicular germ cells and epididymal sperm contain P450 aromatase

We recently found that cytochrome P450 aromatase (P450arom) is present in germ cells of the mammalian testis and is capable of converting androgens to estrogens in the male reproductive tract. The objective of the present study was to determine whether testicular germ cells and epididymal sperm of an avian species are also capable of synthesizing estrogen. P450arom was localized in the rooster testis and epididymal region by immunocytochemistry, using an antiserum generated against purified human placental cytochrome P450arom. Immunostaining was present in pachytene spermatocytes, round spermatids, elongated spermatids, flagella of late spermatids, and sperm in the epididymal region. A positive reaction was also found in nonciliated cells of the epididymal region. However, the absence of mRNA for P450arom in the epididymal region indicated that the immunoreactive protein present in the epididymal region is not synthesized in this region. The immunoreactive P450arom found in epididymal sperm was shown to be active through use of a 3H2O assay. On the basis of these data, we conclude that rooster testicular germ cells and epididymal sperm are sites for the synthesis of estrogen, a potential regulator or modulator of germinal epithelium in the testis and the epithelium of the epididymal region of the avian species.     

A physics-based GaAs PHEMT noise model for low drain bias operation using characteristic potential method

A new physics-based noise model of a GaAs PHEMT is developed using the characteristic potential method (CPM). The model calculates the intrinsic noise current sources using CPM. Combined with the extrinsic noise parameters extracted from the measured S-parameters, the model reproduces four noise parameters of the device accurately under low drain bias voltages without using any fitting parameters. The model is verified with a 0.2-/spl mu/m GaAs PHEMT and shows excellent agreement with the measurements for all the noise parameters up to a drain voltage of 1 V Also, the proposed method allows the simulation of the microscopic noise distribution and thus allows one to obtain a physical understanding of noise mechanisms inside the device.     

Children's ascriptions of knowledge to others.

Piaget believed that young children were egocentric and would ascribe their own knowledge to another. In contrast, Wimmer, Hogrefe, and Perner (1988) found that children did not perform egocentrically when assessing another's knowledge. The present study was carried out to determine which claim was right. A familiar object was secretly placed in a box, and a child and others either looked in the box or did not look. Two of the main findings were that (a) 6-year-olds were significantly better than 3- to 4-year-olds at assessing the other's knowledge, even though both assessed the other's perception correctly (p?p?     

Breakdown probabilities for thin heterostructure avalanche photodiodes

The recurrence theory for the breakdown probability in avalanche photodiodes (APDs) is generalized to heterostructure APDs that may have multiple multiplication layers. The generalization addresses layer-boundary effects such as the initial energy of injected carriers as well as the layer-dependent profile of the dead space in the multiplication region. Reducing the width of the multiplication layer serves to both downshift and sharpen the breakdown probability curve as a function of the applied reverse-bias voltage. In structures where the injected carriers have an initial energy that is comparable to the ionization threshold energy, the transition from linear mode to Geiger-mode is more abrupt than in structures in which such initial energy is negligible. The theory is applied to two recently fabricated Al/sub 0.6/Ga/sub 0.4/As-GaAs heterostructure APDs and to other homostructure thin GaAs APDs and the predictions of the breakdown-voltage thresholds are verified.