变频器在暖通空调行业中的应用

本文提出中央空调系统的一种变频调速改造方案，介绍了该系统的结构组成及运行原理，对系统各部分的作用进行了讨论。     

Modeling for local dynamic behaviors of phenol biodegradation in bubble columns

A coupled three-dimensional (3-D) model, combining hydrodynamics with biochemical reactions, was developed to simulate the local transient flow patterns and the dynamic behaviors of cell growth and phenol biodegradation by yeast Candida tropicalis in the bubble-column bioreactor, using the computational fluid dynamic (CFD) method. In order to validate this proposed model effectively, the validation of the local hydrodynamic characteristics of the gas-mineral salt solution (gas-liquid) two-phase system, with the phenol concentration of 1200 mg/L, and with the absence of cells, was performed in a square-sectioned bubble column bioreactor using the LDA system and conductivity probe. Furthermore, the validation of phenol biodegradation behaviors by yeast Candida tropicalis at different initial concentrations of phenol and cell was also carried out in the above bubble-column bioreactor. The results indicated that the model simulations had a satisfying agreement with the experimental data. Finally, the local instantaneous flow and phenol biodegradation features including gas holdup, gas velocity, liquid velocity, cell concentration and phenol concentration inside the bioreactor were successfully predicted in different-scale bubble columns by the proposed model. © 2006 American Institute of Chemical Engineers AIChE J, 2006     

一种考虑分布电容的模糊故障测距算法

提出了一种考虑分布电容的故障测距新算法。该算法基于微分方程描述的线路数学模型，利用单端信息对高压输电线路进行故障测距，保留了解微分方程算法的简单可靠、现实可行、不必考虑衰减直流分量和谐波及电网频率波动影响的特点，同时考虑过渡电阻和分布电容的影响，克服了传统解微分方程法中在经高阻接地故障时测距误差过大和忽略分布电容引起的故障定位不准确的缺点。为了检验算法的精度，进行了大量的动模实验。结果表明，算法原理正确并具有较高的测距精度。     

室内绿饰技巧——具创意的绿饰容器

鸟笼艺术装饰 鸟笼中是薜荔，能攀援、匍匐成下垂生长，所以在此构成了一幅活的 笼中艺术画。     

浅析露天栈桥改造

结合工程实例，论述了露天栈桥产生裂缝和腐蚀的原因，对栈桥结构进行了评价，提出了加固方案及加固施工中应注意的事项，经使用证明，加固效果良好。     

Toughening mechanism for a rubber-toughened epoxy resin with rubber/matrix interfacial modification

For a rubber-toughened piperidine-DGEBA epoxy resin, the interface between the rubber particle and the epoxy resin matrix was modified by an epoxide end-capped carboxyl terminated butadiene and acrylonitrile random copolymer (CTBN). The end-capping epoxides used were a rigid diglycidyl ether of bisphenol-A (Epon 828), a short-chain flexible diglycidyl ether of propylene glycol (DER 736), and a long-chain flexible diglycidyl ether of propylene glycol (DER 732). The microstructures and the fracture behaviour of these rubber-modified epoxy resins were studied by transmission electron microscopy and scanning electron microscopy. Their thermal and mechanical properties were also investigated. In the rubber-modified epoxy resins, if the added CTBNs were end-capped by a flexible diglycidyl ether of propylene glycol (DER 732 or DER 736) before curing, the interfacial zone of the undeformed rubber particle, the degree of cavitation of the cavitated rubber particle on the fracture surface and the fracture energy of the toughened epoxy resin were all significantly increased. The toughening mechanism based on cavitation and localized shear yielding was considered and a mechanism for the interaction between cavitation and localized shear yielding that accounts for all the observed characteristics is proposed.     

Netted radar sensitivity and ambiguity

The performance of netted radar is evaluated in terms of a netted version of the radar equation and the ambiguity function. A software simulation has been developed to allow assessment of netted radar sensitivity and ambiguity properties in both two-and three-dimensional space. Simulation results demonstrate that coherent netted radar sensitivity depends not only on the radar parameters, but also on the numbers, locations and specification of transmit and receive nodes. The netted radar ambiguity function is affected by a combination of many factors. In addition to those that determine the form of the monostatic ambiguity function, the locations of transmit and receive nodes as well as the position and velocity of the target all are shown to play an important role in evaluating system performance. As a result of these dependencies, it is shown that there is severe degradation of range and Doppler resolution when a target crosses sufficiently close to a transmit-receive baseline.     

喷射沉积SiCP/Al复合材料及6066铝合金热挤压工艺的研究

作者应用喷射共沉积工艺制备 6 0 6 6 / Si Cp复合材料和 6 0 6 6铝合金锭坯 ,在不同的挤压比、挤压温度下挤压成　　型 ,用金相显微镜观察材料的显微组织 ,并测试了材料的力学性能。结果表明 :Si C/ Al复合材料喷射沉积状态的组织很疏松 ,存在许多的间隙 ,其密度约为理论密度的 86 % ,Si C颗粒在复合材料中分布不均匀 ,喷射沉积铝合金基体的致密度可达 90 % ;挤压过程使 Al/ Si Cp复合材料的大多数空隙消失 ,致密程度随挤压比的增大而增大 ,挤压比超过 14 .7后不会明显变化 ,而铝合金基体的致密程度与挤压比的变化关系不明显 ;挤压温度对材料的致密程度影响不大 ;Al/ Si Cp复合材料性能在挤压比超过 14 .7后变化不大 ;铝合金的性能不受挤压比变化的影响 ;而挤压温度过高使材料性能下降     

四川马海毛钢花呢的试制

根据四川马海毛原料资源的品质特性，运用精纺粗做的方法，成功地试制出手感滑糯而富有弹性、光泽明亮悦目，各项物理指标符合FZ/T24002-93标准的四川马海毛纯毛钢花呢，达到了马海毛产品的特殊风格。同时指出四川马海毛制成率偏低。     

多级网络多处理机系统的性能评估

本文建立了多级网络(δ-网)多处理机系统的马尔柯夫模型,为系统结构参数和任务粒度的选择提供了依据。文中分析了处理机数目、网络结构参数和任务粒度对系统性能的影响,并对模型计算结果和仿真结果作了比较。