Organic LED full-color passive-matrix display

Abstract— A full-color 5.2-inch 1/4-VGA passive-matrix organic LED display has been developed, adopting selective deposition for the different emitting materials. The display features 320 (×3) × 240 pixels with an equivalent pixel size of 0.33 × 0.33 mm, white peak luminance of over 150 cd/m², and power consumption of 6 W.     

Experimental verification for stability improvement of sensorless vector control system of induction motor using real‐time tuning of observer gain

This paper proposes a method for the design of the adaptive rotor flux observer gain to improve stability at low speed and in regenerating mode. The method is based on stability analysis, which utilizes a linearized model considering all systems, including each control loop. Therefore, the proposed method considers the effects of motor constants and control circuit constants. The stability analysis using the transfer function for the rotor speed considers the arrangement of poles and zeros and the steady‐state error. The rotor flux observer gain which improves the stability for each operating condition is ascertained. This paper also proposes a real‐time tuning method for the observer gain. The validity of the proposed method was confirmed by simulation using Matlab Simulink and by experiment. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 166(1): 67–81, 2009; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20715     

Position control for a linear slider with twin linear drives

In this paper, position control of a linear slider with twin linear drives is considered. Recently, for high‐speed response, several linear motors have been used for linear slider systems. In such a linear slider, if the linear drives are controlled individually, their position responses may undergo vibrational disturbance by interaction with the output of the motors. To control this vibration, this paper presents a dynamic model of a linear slider system which consists of two motion systems decoupled by coordinate transformation, and proposes a feedback controller which is designed for these two decoupled systems. The effectiveness of the proposed method is confirmed by experiments. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 147(4): 68–76, 2004; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10291     

超临界流体技术在苎麻织物中的应用研究

对影响超临界CO2流体处理苎麻纤维的因素，如温度、压力、时间以及助溶剂进行正交试验，对处理后的苎麻纤维的含杂情况、微结构、机械物理性能和热稳定性等性质作了测试分析。结果表明，超临界CO2流体处理苎麻织物的最佳工艺条件为：工作温度120℃、压力25MPa、时间40min、助溶剂0．1％。该处理可改善苎麻纤维的性能，提高其膨胀性，有利于后续加工，并为其进一步改性打下基础。     

The effects of di-D-fructofuranose-1,2':2,3'-dianhydride (DFA III) administration on human intestinal microbiota

Di-D-fructofuranose-1,2':2,3'-dianhydride (DFA III) was shown to enhance Ca absorption in rat and human intestine. The effects of DFA III administration (9 g per day for 4 weeks that corresponded to 3-fold the optimal dosage of DFA III) on human intestinal microbiota were studied using denaturing gradient gel electrophoresis (DGGE). The major groups of human intestinal microbiota reported previously: the Bacteroides, the Clostridium coccoides group (Clostridium cluster XIVa), the Clostridium leptum group (Clostridium cluster IV), and the Bifidobacterium group were detected. The similarity of 30 DGGE profiles based on the V3 region (before and after administration to the 15 subjects) of the 16S rDNA were calculated using Pearson's correlation based on numbers, positions and intensity of bands, and then a dendrogram of DGGE profiles was constructed by the unweighted pair group method using arithmetic average (UPGMA) clustering method. By these analyses, no difference in DGGE profiles after DFA III administration was observed in healthy subjects, while two subjects with chronic constipation showed different profiles, namely on numbers, positions and the intensity of some bands. Their stools were softer and stool frequencies increased and they obtained relief from constipation.     

Effects of sea surface temperature accuracy on offshore wind resource assessment using a mesoscale model

Offshore wind simulations were performed with the Weather Research and Forecasting (WRF) model driven by three different sea surface temperature (SST) datasets for Japanese coastal waters to investigate the effect of the SST accuracies on offshore wind simulations. First, the National Centers for Environmental Prediction Final analysis (FNL) (1° × 1° grid resolution) and the Operational Sea Surface Temperature and Sea Ice Analysis (OSTIA) (0.05° × 0.05° grid resolution) datasets were compared with in situ measurements. The results show a decrease in accuracy of these datasets toward the coast from the open ocean. Aiming at an improved accuracy of SST data, we developed a new high‐resolution SST dataset (0.02° × 0.02° grid resolution). The new dataset referred to as MOSST is based on the Moderate Resolution Imaging Spectroradiometer (MODIS) product, provided by the Japan Aerospace Exploration Agency (JAXA). MOSST was confirmed to be more accurate than FNL and OSTIA for the coastal waters. Then, WRF simulations were carried out for 1 year with a 2 km grid resolution and by using the FNL, OSTIA and MOSST datasets. The use of the OSTIA dataset for a WRF simulation was found to improve the accuracy when compared with the FNL dataset, and further improvement was obtained when the MOSST dataset was applied. The sensitivity of wind speed and wind energy density to SST is also discussed. We conclude that the use of an accurate SST is a key factor not only for realistic offshore wind simulations near the surface but also for accurate wind resource assessments at the hub height of wind turbines. Copyright © 2014 John Wiley & Sons, Ltd.     

Effect of SiC on Interfacial Reaction and Sintering Mechanism of TiB2

Compacts of TiB₂ with densities approaching 100% are difficult to obtain using pressureless sintering. The addition of SiC was very effective in improving the sinterability of TiB₂. The oxygen content of the raw TiB₂ powder used in this research was 1.5 wt%. X-ray photoelectron spectroscopy showed that the powder surface consisted mainly of TiO₂ and B₂O₃. Using vacuum sintering at 1700°C under 13–0.013 Pa, TiB₂ samples containing 2.5 wt% SiC achieved 96% of their theoretical density, and a density of 99% was achieved by HIPing. TEM observations revealed that SiC reacts to form an amorphous phase. TEM-EELS analysis indicated that the amorphous phase includes Si, O, and Ti, and X-ray diffraction showed the reaction to be TiO₂+ SiC → SiO₂+ TiC. Therefore, the improved sinterability of TiB₂ resulted from the SiO₂ liquid phase that was formed during sintering when the raw TiB₂ powder had 1.5 wt% oxygen.     

Three-dimensional analysis of the spatial distribution of iron oxide particles in a decorative coating by electron microscopic imaging

The three-dimensional (3D) spatial structure of an iron oxide containing alkyd paint specimen has been investigated by serial block-face scanning electron microscopy (SBFSEM). The resultant images of the 3D structure clearly present the spatial distribution of the iron oxide pigment particles in the coating film and reveal the extent of aggregation of the particles in the matrix material. More than one-half of the iron oxide particles (in volume) had aggregated to form clusters of considerable sizes that follow a Gaussian spacing distribution in the measured coating film. Over 80% of the clusters have dimensions between 1.5 μm and 3.5 μm; also, pores are evident at the centres of clusters whose sizes are larger than 2 μm. The work demonstrated here reveals a new approach to fully characterize the 3D spatial structure of coatings and to explore their correlations with the performance of the materials.     

Selective High‐Frequency Mechanical Actuation Driven by the VO2 Electronic Instability

Relaxation oscillators consist of periodic variations of a physical quantity triggered by a static excitation. They are a typical consequence of nonlinear dynamics and can be observed in a variety of systems. VO₂ is a correlated oxide with a solid‐state phase transition above room temperature, where both electrical resistance and lattice parameters undergo a drastic change in a narrow temperature range. This strong nonlinear response allows to realize spontaneous electrical oscillations in the megahertz range under a DC voltage bias. These electrical oscillations are employed to set into mechanical resonance a microstructure without the need of any active electronics, with small power consumption and with the possibility to selectively excite specific flexural modes by tuning the value of the DC electrical bias in a range of few hundreds of millivolts. This actuation method is robust and flexible and can be implemented in a variety of autonomous DC‐powered devices.