Simultaneous three-dimensional step-height measurement and high-resolution tomographic imaging with a spectral interferometric microscope

A noncontact, nonmechanical scanning, wide-field spectral interference microscope is developed for simultaneous measurement of three-dimensional step-height of discontinuous objects and tomographic imaging. A superluminescent diode (SLD) is used as a broadband light source and a liquid-crystal Fabry-Perot interferometer (LC-FPI) as a frequency-scanning device. By means of changing the injection current to the SLD, the spectral profile of the SLD is equalized, and a constant light input to the interferometer is achieved over the entire frequency-scan range. The Fourier-transform technique is used to determine both the amplitude and the phase of spectral fringe signals. Three-dimensional height distribution of a discontinuous object is obtained from the phase information, whereas optically sectioned images of the object are obtained either from the amplitude information alone or from the combination of both the amplitude and phase information. Experimental results with submicrometer resolution are presented for both step-height measurement and tomographic sectioning.     

Application of a NDI method using magneto-optical film for micro-cracks

Leakage magnetic flux is occurred in the cracked area of magnetized specimens, and also it changes the magnetic domain area of the magneto-optical film positioned on the specimen. It causes the change of the optical permeability of the magnetic domain on the crack area. So crack images can be obtained easily using this principle. On the other hand, utilizing a laser in this method makes possible to perform a remote sensing by detecting the light intensity contrast between cracked area and normal area. This paper shows the application of non-destructive inspection system taking advantage of magneto-optical method for micro-cracks and presents examples applied to the several types of specimens having fatigue cracks and fabricated cracks using this method. Also the authors prove the possibility of this method as a remote sensing system under the oscillation load considering application to real fields.     

Oligoethylenes in high pressure polyethylene

Summary Series of several alkylated cycloheptanes were detected in some commercial samples of high pressure polyethylene. The structures of the alkylated cycloheptanes were found closely related to the chain transfer agents used in the polymerization process. A probable mechanism involving radical cyclization to cycloheptane structures was presented.     

Multiplexed toxin analysis using four colors of quantum dot fluororeagents

Quantum dots (QDs) have the potential to simplify the performance of multiplexed analysis. In this work, we prepared bioinorganic conjugates made with highly luminescent semiconductor nanocrystals (CdSe-ZnS core-shell QDs) and antibodies to perform multiplexed fluoroimmunoassays. Sandwich immunoassays for the detection of cholera toxin, ricin, shiga-like toxin 1, and staphylococcal enterotoxin B were performed simultaneously in single wells of a microtiter plate. Initially the assay performance for the detection of each toxin was examined. We then demonstrated the simultaneous detection of the four toxins from a single sample probed with a mixture of all four QD-antibody reagents. Using a simple linear equation-based algorithm, it was possible to deconvolute the signal from mixed toxin samples, which allowed quantitation of all four toxins simultaneously.     

Hydration of halide anions in ion-exchange resin and their dissociation from cationic groups

The local structures of Cl- and Br- in an anion-exchange resin have been investigated by X-ray absorption fine structure (XAFS). The resins, which have been equilibrated under various partial water vapor pressures to allow the anions to have various hydration numbers, are provided for XAFS measurements. The XAFS spectra indicate that two scattering groups around the counteranion are present, that is, water molecules and an ion-exchange group. Regression analyses allow the separation of the contributions from these two scattering groups; thus, the average hydration number (N) is determined. The hydration number linearly increases with increasing the number of water molecules (n) adsorbed by an ion-exchange pair (an ion-exchange group and a counteranion) until the ion-exchange pair adsorbs ca. 3 water molecules, indicating that all of the adsorbed water molecules coordinate the counteranion. However, an increase in N with increasing n becomes small as n exceeds 3; N finally reaches 3.9 (+/-0.4) for Cl- and ca. 3.4 (+/-0.5) for Br-. Detailed studies of the water adsorption isotherms imply that the maximum hydration number of these anions is three when they are bound by the ion-exchange groups, and as more water molecules are supplied, they are dissociated from the ion-exchange groups; ca. 40% of total counteranions are dissociated from the ion-exchange groups.     

Wind-flow measurement over the Subaru Telescope

Wind flows over the 8.2-m Subaru Telescope at Mauna Kea in Hawaii were analyzed with a correlation method. Three or four wind flows were detected from our measurements. Spatial and temporal resolution of the wind-flow analysis across the 8.2 m pupil were investigated experimentally. A three-dimensional spatiotemporal-frequency analysis was also applied to the wind-flow data.     

Spectroscopic studies on the rare-earth vanadites

The nature of the V/1bO/1bV interaction of the perovskite type rare-earth vanadites were studied by spectroscopic methods. Infrared and ultraviolet analyses revealed that the V/1bO bond length became shorter and that the V/1bO bond strength increased, as a function of the atomic number of lanthanide elements in LnVO₃. Judging from the x-ray fluorescent spectra of oxygen-K_α, the energy level of O^2? (p_π) orbitals of the heavier rare-earth vanadites was lower than that of the lighter rare-earth vanadites.     

Pulsed laser irradiation impact on two marine diatoms Skeletonema costatum and Chaetoceros gracilis

The ability of pulsed laser irradiations to cause damage on the biofouling organisms is recently being investigated. If this technique is employed in industries such as power generation wherein a large quantity of water is being used for the cooling purpose, many organisms other than the targeted would get affected. In this study, we have investigated the damage caused by the pulsed laser irradiations from an Nd:YAG laser (fluence 0.1J/cm(2)) for varying durations such as 2, 5, 10, 30, 60 and 300 s on two marine diatom species namely Skeletonema costatum and Chaetoceros gracilis. Upon exposure to low power laser irradiations, these diatom species showed mortalities between 52.6+/-9.3% to 97.7+/-3.1% in the case of S. costatum and 57.8+/-2.5% to 98.9+/-0.6% in the case of C. gracilis for 2 and 300 s of irradiations, respectively. The mortality increased with the increase in the duration of laser irradiation. The estimation of the chlorophyll a concentration in the irradiated samples showed a considerable reduction varying between 9.8% and 57% in C. gracilis and 3% and 70.3% in S. costatum for 2 and 300 s of irradiations, respectively. The laser-survived cells grew as the non-irradiated (control) samples. C. gracilis frustules were broken by the laser whilst, the cell materials were drained out of the frustules in the case of S. costatum. The study therefore showed that the low power pulsed laser irradiations could cause significant damage on the two species of planktonic diatoms.     

Development of service-oriented products based on the inverse manufacturing concept

To achieve sustainability, resource consumption and waste generation must be drastically decreased. For societal acceptance, preservation of both quality of life and corporate profits are essential. One promising approach is to shift the source of value from the amount of product sold to the quality of services the product provides. This paper describes the need for redesigning recycling systems from a manufacturing perspective and then discusses the possibility of this "servicification" of products, describing our experience with prototype development. We discuss development of product prototypes and their business, using consumer facsimile machines as an example of "service-oriented products". Traditional thought presumes that only products comprising new materials and components are valuable. Consideration of a service-oriented product can serve as a stimulus to revise this mode of thought and to control delivery and quality of disposed products. This paper also provides a life cycle simulation of the developed service-oriented business. Simulation results indicate that service-oriented business can potentially reduce environmental impact while extending business opportunities from the viewpoint of whole product life cycles.