Performance Analysis of Full-Duplex Vehicle-to-Vehicle Relay System over Double-Rayleigh Fading Channels

Mobile Networks and Applications - In this paper, we study the performance of a full-duplex (FD) relay system in vehicle-to-vehicle (V2V) communication. In this relay communication system, the...     

Cache-aided full-duplex: delivery time analysis and optimization

Edge caching has received much attention as a promising technique to overcome the stringent latency and data-hungry challenges in the future generation wireless networks. Meanwhile, full-duplex (FD) transmission can potentially double the spectral efficiency by allowing a node to receive and transmit at the same frequency band simultaneously. In this paper, we investigate the delivery time performance of a cache-aided FD system, in which an edge node, operates in FD mode, serves users via wireless channels and is equipped with a cache memory. Firstly, we derive a closed-form expression for the average delivery time by taking into account the uncertainties of both backhaul and access wireless channels. The derived analysis allows the examination of the impact of key parameters, e.g., cache size and transmit power. Secondly, a power optimization problem is formulated to minimize the average delivery time. To deal with the non-convexity of the formulated problem, we propose an iterative optimization algorithm based on the bisection method. Finally, numerical results are presented to demonstrate the effectiveness of the proposed algorithm. A significant delivery time reduction is achieved by the proposed optimization compared to the FD reference and half-duplex counterpart.

     

Silver metallization for microwave device using aerosol deposition

We examined the possibility of using aerosol deposition (AD) as a simple, environmentally friendly and dry metallization process capable of acting as an alternative to the electroless and electroplating methods. Silver thick films were fabricated, their characteristics evaluated, and the factors influencing their growth investigated. As a result, silver thick films were successfully fabricated by AD with high deposition rates (10 μm/min) at room temperature. The resistivity of the as-deposited silver thick films was 8–10 times larger than that of the bulk silver. Post-annealing increased the resistivity of the silver films by approximately 2–3 times compared to that of the bulk silver. Microstructural observations revealed an increase in the connectivity between the silver particles after the heat treatments, which reduced the resistivity of the as-deposited silver films.     

Physicochemical properties,antioxidant activity and inhibition of α‐glucosidase of a novel fermented pepper (Capsiccum annuum L.) leaves‐based vinegar

The aim of this study was to utilise by‐product pepper leaves for vinegar production due to its nutritional value. Changes in physicochemical and functional properties in four main process from raw material (leaves) to lactic acid (juice), alcohol (wine) and acetic acid (vinegar) fermentations were evaluated and compared. Their nutritional compositions were significantly different and particularly the wine and vinegar had higher total phenol content and their expanded diversity than the juice and then leaves (P < 0.05). Difference in values for phenolic compound was highly correlated with their α‐glucosidase inhibitory (AGI) and antioxidant capacities in DPPH and superoxide radical scavenging and reducing power assays (r = 0.919–0.981); vinegar ≥ wine > juice > leaves. Especially, AGI activity was greatly enhanced depending on fermentation steps beyond expectation. Thus, these data confirm that pepper leaves is a good functional source and the vinegar fermentation improved the functionality in stages.     

A comparative study on the antioxidative and anti‐allergic activities of fresh and aged black garlic extracts

The antioxidative and anti‐allergic activities of fresh and aged black garlic extracts were investigated. The garlic samples were extracted with 70% ethanol (v/v) and the total phenolic content was measured. The antioxidant capacity of extracts was assessed by determining the scavenging activities on 1,1‐diphenyl‐2‐picrylhydrazyl and hydroxyl radicals, ferricyanide reducing power, ferrous ion‐chelating ability and inhibitory effect on linoleic acid peroxidation. The anti‐allergic activity of extracts was analysed by measuring their inhibitory effects against β‐hexosaminidase release. The aged black garlic exhibited significantly higher phenolic content and greater antioxidative activity than fresh garlic. Both garlic extracts showed strong antioxidant capacity in a dose‐dependent manner. On the other hand, a considerably higher suppression of β‐hexosaminidase release was found in fresh garlic extract at lower concentration compared with that of the black garlic. Results of this study illustrate that ageing of garlic could enhance its antioxidant capacity, but could decrease its anti‐allergic activity.     

Al2O3-nanodiamond composite coatings with high durability and hydrophobicity prepared by aerosol deposition

We attempted the room-temperature fabrication of Al₂O₃-based nanodiamond (ND) composite coating films on glass substrates by an aerosol deposition (AD) process to improve the anti-scratch and anti-smudge properties of the films. Submicron Al₂O₃ powder capable of fabricating transparent hard coating films was used as a base material for the starting powders, and ND treated by 1H,1H,2H,2H-perfluorooctyltriethoxysilane (PFOTES) was added to the Al₂O₃ to increase the hydrophobicity and anti-wear properties. The ND powder treated by PFOTES was mixed with the Al₂O₃ powder by ball milling to ratios of 0.01 wt.%, 0.03 wt.%, and 0.05 wt.% ND. The water contact angle (CA) of the Al₂O₃-ND composite coating films was increased as the ND ratio increased, and the maximum water CA among all the films was 110°. In contrast to the water CA, the Al₂O₃-ND composite coating films showed low transmittance values of below 50% at a wavelength of 550 nm due to the strong agglomeration of ND. To prevent the agglomeration of ND, the starting powders were mixed by attrition milling. As a result, Al₂O₃-ND composite coating films were produced that showed high transmittance values of close to 80%, even though the starting powder included 1.0 wt.% ND. In addition, the Al₂O₃-ND composite coating films had a high water CA of 109° and superior anti-wear properties compared to those of glass substrates.     

Triethyl and tributyl phosphite as flame-retarding additives in Li-ion batteries

This study examined the influence of triethyl and tributyl phosphite (TEP and TBP) additives on the electrochemical performance of lithium-ion cells. The cell performance of the TEP- and TBP-containing electrolytes was evaluated by cyclic voltammetry, thermogravimetric analysis, electrochemical impedance spectroscopy, Fourier transform infrared spectroscopy and scanning electron microscopy. The flammability of the electrolytes was also investigated by measuring the self-extinguishing time of the electrolytes. The results showed that the TEP and TBP additives suppressed the flammability of the electrolyte, with a significant improvement in cell performance observed for the TEP additive. In addition, TEP and TBP additives improved the thermal stability of the battery and its electrochemical cell performance. Overall, 5 wt% TEP and TBP can be used as a flame-retarding additive to improve the cell performance of Li-ion batteries due to the decrease in cell impedance and SEI formation.