Termites live in a material world: exploration of their ability to differentiate between food sources.

Drywood termites are able to assess wood size using vibratory signals, although the exact mechanism behind this assessment ability is not known. Important vibratory characteristics such as the modal frequencies of a wooden block depend on its geometry and boundary conditions; however, they are also dependent on the material characteristics of the block, such as mass, density and internal damping. We report here on choice experiments that tested the ability of the drywood termite Cryptotermes secundus to assess wooden block size using a solid wooden block paired with a composite block, the latter made of either wood and aluminium or wood and rubber. Each composite block was constructed to match mass or low-frequency vibratory modes (i.e. fundamental frequency) of the solid wooden block. The termites always chose the blocks with more wood; they moved to the solid wooden blocks usually within a day and then tunnelled further into the solid wooden block by the end of the experiment. Termites offered composite blocks of wood and rubber matched for mass were the slowest to show a preference for the solid wooden block and this preference was the least definitive of any treatment, which indicated that mass and/or damping may play a role in food assessment. This result clearly shows that the termites were not fooled by composite blocks matched for mass or frequency, which implies that they probably employ more than a single simple measure in their food assessment strategy. This implies a degree of sophistication in their ability to assess their environment hitherto unknown. The potential importance of alternative features in the vibrational signals is discussed.     

Electrostatic Droplet Growth in a Neutrally Buoyant Emulsion

Droplet growth is examined in a water-in-oil type emulsion where the droplets are subjected exclusively to viscous and dielectrophoretic forces. The latter are produced by the interaction of the droplets with an otherwise uniformly imposed electric field. Theoretical considerations are presented as a basis for understanding and interpreting the experiments. An emulsion consisting of deionized water droplets in a silicone oil of specific gravity I is subjected to a uniform 60 Hz, ac electrostatic field. Initially, the droplets are fairly monodisperse with mean diameters of approximately 25 , sm. The changes in droplet size distributions with time are examined with a laser diffraction system for water volume fractions ranging from 0.001 to 0.1 and applied fields ranging from 52 to 520 kVm-1. The average droplet size increases exponentially with time; we examine the exponent's dependence on average field strength and droplet volume fraction.     

Towards real CAD

Present-day computer-aided design (CAD) packages play only a small part in the area of mechanical engineering design, which involves the synthesis and embodiment of physical components to perform a pre-determined function without unwanted side effects. The computer cannot properly help the designer in this task until it is able to capture and process the function requirements of the design. This paper describes the computer system being developed for this purpose at the Engineering Design Centre at Cambridge University Engineering Department. The paper also explores some of the geometrical and programming implications raised.     

Genetic algorithms in engineering electromagnetics

This paper presents a tutorial and overview of genetic algorithms for electromagnetic optimization. Genetic-algorithm (GA) optimizers are robust, stochastic search methods modeled on the concepts of natural selection and evolution. The relationship between traditional optimization techniques and the GA is discussed. Step-by-step implementation aspects of the GA are detailed, through an example with the objective of providing useful guidelines for the potential user. Extensive use is made of sidebars and graphical presentation to facilitate understanding. The tutorial is followed by a discussion of several electromagnetic applications in which the GA has proven useful. The applications discussed include the design of lightweight, broadband microwave absorbers, the reduction of array sidelobes in thinned arrays, the design of shaped-beam antenna arrays, the extraction of natural resonance modes of radar targets from backscattered response data, and the design of broadband patch antennas. Genetic-algorithm optimization is shown to be suitable for optimizing a broad class of problems of interest to the electromagnetic community. A comprehensive list of key references, organized by application category, is also provided     

Computational medicine: bioelectric field problems

Applications of large-scale computer modeling and simulation to a class of bioelectric field problems in a variety of biomedical research areas, from single cells to full human structures, are described. The authors focus on a specific subset of bioelectric field problems that have applications in electrocardiography and electroencephalography. The physics and physiology of bioelectric volume conductors are introduced. A specific computational example and the authors' view on the future direction of computational medicine are presented     

Pocket pagers in lots of one CIM

The Fusion program, a method for agile, flexible computer integrated manufacturing (CIM) at Motorola's Paging Products Group, is discussed. Fusion's CIM and automated assembly system can manufacture a wide variety of different products on the same production line. The development of the Fusion program and how it differs from its predecessor, the Bandit program, are described     

Directly Compressible Acetaminophen Compositions Prepared by Fluidized-Bed Granulation

Polyvinylpyrrolidone (PVP) in aqueous solution was used as a binding agent in a fluidized-bed system to agglomerate acetaminophen powder into directly compressible granules. It was found that a minimal amount of 5% w/w PVP in a concentration of 7.5% w/v or less was needed to produce granules with an acceptable flow and the corresponding tablets having enough hardness without capping. There was a strong correlation between the time for 80% dissolved (T₈₀) and the logarithm of granule volume-surface mean diameter. A directly compressible acetaminophen composition to manufacture tablets having a T₈₀ value less than 30 min can be prepared simply by adding an appropriate amount of disintegrant (crospovidone, sodium starch glycolate, or pregelatinized starch) to the agglomerated granules.     

Multi-emitter Si/GexSi1-x heterojunctionbipolar transistor with no base contact and enhanced logic functionality

We demonstrate multi-emitter Si/Ge_xSi_1-x n-p-n heterojunction bipolar transistors (HBT's) which require no base contact for transistor operation. The base current is supplied by the additional emitter contact under reverse bias due to the heavy doping of the emitter-base junction. Large-area HBT test structures exhibit good transistor characteristics, with current gain β≈400 regardless of whether the base current is supplied by a test base electrode or one of the emitter contacts. These devices have enhanced logic functionality because of emitter contact symmetry. Since device fabrication does not require base electrode formation, the number of processing steps can be reduced without significant penalty to HBT performance     

Solution structure of a DNA duplex containing the exocyclic lesion 3,N4-etheno-2'-deoxycytidine opposite 2'-deoxyguanosine

Vinyl chloride reacts with cellular DNA producing 3,N4-etheno-2'-deoxycytidine (epsilonC) along with other exocyclic adducts. The solution structure of an oligodeoxynucleotide duplex containing an epsilonC.dG base pair was determined by high-resolution NMR spectroscopy and molecular dynamics simulations. NMR data indicated that the duplex adopts a right-handed helical structure having all residues in anti orientation around the glycosylic torsion angle. The epsilonC adduct has a sugar pucker in the C3'-endo/C4'-exo region while the rest of the residues are in the C2'-endo/C3'-exo range. NOE interactions established Watson-Crick alignments for canonical base pairs of the duplex. The imino proton of the lesion-containing base pair resonated as a sharp signal that was resistant to water exchange, suggesting hydrogen bonding. Restrained molecular dynamics simulations generated three-dimensional models in excellent agreement with the spectroscopic data. The refined structures are slightly bent at the lesion site without major perturbations of the sugar-phosphate backbone. The adduct is displaced and shifted toward the major groove of the helix while its partner on the complementary strand remains stacked. The epsilonC(anti).dG(anti) base pair alignment is sheared and stabilized by the formation of hydrogen bonds. The biological implications of structures of epsilonC-containing DNA duplexes are discussed.     

Micropipelined asynchronous discrete cosine transform (DCT/IDCT)processor

We describe the design and implementation of an asynchronous discrete cosine transform/inverse discrete cosine transform (DCT/IDCT) processor core compliant with the CCITT recommendation H.261. First, a micropipelined implementation with level-sensitive latches is shown. This is improved by replacing the level-sensitive latches with dual-edge triggered flip-flops to save power and using completion-detection adders in the critical stage of the pipeline to exploit the data-dependent processing delay. Gate-level simulation of extracted layouts indicates that the performance of asynchronous implementations is comparable with that of a synchronous implementation based on an identical architecture. This is because part of the penalty introduced by handshaking circuitry in an asynchronous pipeline can be recovered by exploiting data-dependent processing delays with completion-detection circuitry. In pipelines with significant arithmetic processing such as the DCT/IDCT processor, this is easily accomplished. Our results are encouraging because asynchronous designs do not employ global clocking. In the near future when clock generation, clock distribution, and the power consumed in the clock circuitry become limiting factors in the design of large synchronous application specific integrated circuits (ASICs), asynchronous implementation methodology could be pursued as a real alternative