Point/Counterpoint

POINT: AOP Will See Widespread Adoption Adrian Colyer, Rob Harrop, Rod Johnson, and Alexandre Vasseur AOP offers both the short--and long-term return on investment needed to ensure its widespread adoption. COUNTERPOINT: AOP Has Yet to Prove Its Value Danio Beuche and Cédric Beust Where is the proof that nonhierarchical modularization into aspects makes systems development cheaper or better?     

Spray cooling effects on milk production, milk, and rectal temperatures of cows during a moderate temperate summer season

During summer 1982, responses of lactating Holstein and Guernsey cows were measured by milk temperature recorded by a Digital Dataloger with thermocouples attached to Boumatic flow meters. Maximum air temperature and temperature-humidity index averaged 30.8 degrees C and 75.6 for July. Breed did not affect milk temperature, but within-breed milk temperature increased with production. In a second study, benefits of spray cooling were evaluated with 24 Holsteins in midlactation assigned randomly to two groups of 12 and maintained under loose-housing conditions. Spray nozzles were installed in the walkways and under the manger shade for the spray treatment group. Maximum temperature and temperature-humidity index during the spray study were 27 degrees C and 73.9. Rectal temperature taken following milking averaged less for treatment than control (38.8 versus 39.1 degrees C). Milk temperature was similar (37.8 versus 38.1 degrees C). Daily milk yield was .70 kg higher than controls. Milk temperature may provide reliable indication of climate stress similar to rectal temperature, and spray cooling improves cow comfort and lessens summer decline of milk production.     

Constructions of particular random processes

This paper reviews how to construct sets of random numbers with particular amplitude distributions and correlations among values. These constructions support both high-fidelity Monte Carlo simulation and analytic design studies. A variety of constructions is presented to free engineering models from “white or normal” limitations embodied in many current simulations. The methods support constructions of conventional stationary and normally distributed processes, nonstationary, nonnormal signal and interference waveforms, nonhomogeneous random scenes, nonhomogeneous volumetric clutter realizations, and snapshots of randomly evolving, nonhomogeneous scenes. Each case will have specified amplitude statistics, e.g., normal, log-normal, uniform, Weibull, or discrete amplitude statistics; and selected correlation, e.g., white, pink, or patchy statistics, clouds. or speckles. Sets of random numbers with correlation, nonstationarities, various tails for the amplitude distributions, and multimodal distributions can be constructed. The paper emphasizes aspects of probability theory necessary to engineering modeling     

Designing circuits with partial scan

In this scan design methodology, only selected faults are targeted for detection. These faults are those not detected by the designer's functional vectors. The test generator decides exactly which flip-flops should be scanned using one of two methods. In the first method, all possible tests are generated for each target fault, and the set of tests requiring the fewest flip-flops is selected. In the second method, only one test is generated for each fault, and the use of flip-flops is avoided as much as possible during test generation. Examples of actual VLSI circuits show a savings of at least a 40% in full-scan overhead     

Comparison of capillary gas chromatographic method and automated spectrophotofluorometric methods for measuring content uniformity of conjugated oestrogens in pharmaceutical preparations

To measure the content uniformity of conjugated cestrogens tablets, the USP XXII monograph specifies a capillary gas chromatographic method. This involves separation of the trimethylsilyl derivatives of the various oestrogens found in a typical conjugated oestrogens tablet using a fused-silica 0V 225 bonded phase column. Hydrogen is used as the carrier gas with FID detection. A more rapid spectrophotofluorometric method of analysis has been developed in which the oestrogens are extracted from the dosage form into water, then transferred into organic solvent as the dicyclohexylamine complex. Fluorescence is developed by heating the solution of the complex in the presence of 70% sulphuric acid. The chemistry and detection are carried out using a segmented-flow analyser.The spectrophotofluorometric method is preferred as a routine control for content uniformity because considerable time is saved during sample preparation and analysis compared to gas chromatography. Coefficients of variation show that both methods produce acceptable results. These results fall well within the USP XXII [1] monograph, limits and also well within the tighter limits imposed by the USP XXII, section 905.     

The gradient of the finite element variational indicator with respect to nodal and applications in fracture mechanics and mesh optimization

We derive a closed-form expression for the change in the variational indicator of a finite element mesh with respect to perturbations in nodal point co-ordinates. The expression is evaluated very effectively from standard finite element data obtained in one solution, and may be easily programmed as part of a general finite element code. We present the derivation for two- and three-dimensional isoparametric elements used in linear and nonlincar elasticity. The expression has practical applications in the computation of stress intensity factors in fracture mechanics and in the determination of the ‘optimal’ mesh with a given element-node connectivity. We demonstrate both applications by accurately determining the stress intensity factor of a Mode I crack using a finite element mesh which was improved using mesh optimization.     

Rainbow Net analysis of VAXcluster system availability

A system modeling technique, Rainbow Nets, is used to evaluate the availability and mean-time-to-interrupt of the VAXcluster. These results are compared to the exact analytic results showing that reasonable accuracy is achieved through simulation. The complexity of the Rainbow Net implemented for the VAXcluster does not increase as the number of processors increases, but remains constant. This is unlike a Markov model which increases in size exponentially. The constancy is achieved by using tokens with identity attributes (items) that can have additional attributes associated with them (features) which can exist in multiple states. The time to perform the simulation increases, but this is a polynomial increase rather than exponential. With Rainbow Nets, there is no restriction on distributions used for transition firing times. This freedom allows real situations to be modeled more accurately by choosing the distribution which best fits the system performance. This eliminates the need to make the many simplifying assumptions that are typically required to keep analytic calculations from becoming intractable