New intramolecular effect observed for polyesters: An anomeric effect

A series of polyesters was prepared to evaluate hydrolytic stability as a function of cyclohexyl dibasic acid content. The three cyclohexyl dibasic acids: 1,2; 1,3; and 1,4 were formulated into polyesters with two glycols. The proportion of cis and trans isomers was evaluated via ¹H NMR. The hydrolytic stability of short chain polyesters was evaluated in an acetone/water mixture which solubilized the polyesters to mimic oligoester behavior within a thermosetting polyester coating environment. The rate of hydrolysis was monitored by acid titration and corroborated by GPC. Surprisingly, 1,2-cylohexyl diacid-based polyesters were robust, and 1,3-cyclohexyl diacid-based polyesters were the most susceptible to hydrolysis. Evidently, a 1,2-anchimeric effect for cyclohexyl dibasic acid polyesters was not an important consideration, while the 1,3-cyclohexyl ester interaction was. Consequently, an anomeric effect was proposed. Presented at the 81st Annual Meeting of the Federation of Societies for Coatings Technology, November 12–14, 2003, in Philadelphia, PA.     

Children, robotics, and education

Popular interest in robotics has increased astonishingly in the last few years. Robotics is seen by many as offering major new benefits in education at all levels. Before rushing to exploit this popularity, educators should ask serious questions about the universality and longevity of the robotics phenomenon. Is it a fashion? To be useful, the energy released by robotics must be sustained and universal, and the means of exploiting it must be systematic. Universities define their own robotics curriculum, but most schools lack both the resources and the freedom to do this, and must work with a national curriculum. If it can be shown that robotics has sustained potential in education, it seems inevitable that new ways need to be found to integrate it into the school curriculum.     

Oxidation of oleuropein studied by EPR and spectrophotometry

The autoxidation at alkaline pH and enzymatic oxidation by mushroom tyrosinase of oleuropein, the dominant biophenol present in the fruits and leaves of Olea europea, was followed by both electron paramagnetic resonance (EPR) and absorption spectroscopy. For comparison, the same oxidation processes were applied to 4‐methylcatechol, a simple polyphenol present in olive mill wastewaters. EPR spectra of stable o‐semiquinone radicals produced during autoxidation at pH 12 and short‐lived o‐semiquinone free radicals produced during autoxidation at pH 9.0 or tyrosinase action and stabilized by chelation with a diamagnetic metal ion (Mg²⁺) were recorded for both polyphenols, and the corresponding hyperfine splitting constants were determined. The UV‐Vis spectral characteristics of the oxidation of polyphenols were highly dependent on the type of polyphenol, oxidant type and the pH of the reaction. The kinetic behavior of tyrosinase in the presence of oleuropein and 4‐methylcatechol was followed by recording spectral changes at 400 nm (absorption maximum) over time. The tysosinase activity with oleuropein showed a pronounced pH optimum at pH 6.5 and a minor one around pH 8. From the data analysis of the initial rate at pH 6.5, the kinetic parameters K_m = 0.34 ± 0.03 mM and V_max = 0.029 ± 0.002 ΔA₄₀₀ min^–1 were determined for oleuropein.     

Support vector regression for determining the minimum zone sphericity

Several methods have been investigated to determine the deviation of manufactured spherical parts from ideal geometry. One of the most popular is the least squares technique, which is still widely employed in coordinate measuring machines used by industries. The least squares algorithm is optimal under the assumption that the data set is very large and has the inherent disadvantage of overestimating the minimum tolerance zone, resulting sometimes in the rejection of good parts. In addition, it requires that the data be distributed normally. The support vector regression approach alleviates the necessity for these assumptions. While most fitting algorithms in practice today require that the sampled data accurately represent the surface being inspected, support vector regression provides a generalization over the surface. We describe how the concepts of support vector regression can be applied to the determination of tolerance zones of nonlinear surfaces; to demonstrate the unique potential of support vector machine algorithms in the area of coordinate metrology. In specific, we address part quality inspection of spherical geometries.     

Tilted superlattice composition profile determined by photoluminescence and thermal disordering

The composition profile of an (AlAs)_1/2(GaAs)_1/2 tilted superlattice is characterized for the first time. The tilted superlattice sample is thermally disordered, and the energy of the direct band gap photoluminescence peak is measured as a function of increasing layer interdiffusion. The shift in the photoluminescence peak energy after completely disordering the tilted superlattice is 39 meV. A theoretical model is used to simulate the change in band gap as a function of layer interdiffusion for several composition profiles. The profile that gives the best fit to the experimental data is chosen. The tilted superlattice composition profile is found to be sinusoidal, varying from Al_0.40Ga_0.60As to Al_0.60Ga_0.40As.     

Optical and electrical characterization of CdS thin films

Thin CdS films have been grown by chemical bath (CdCl₂, thiourea, ammonia) deposition (CBD) on SnO₂ (TO)-coated glass substrate for use as window materials in CdS/CdTe solar cells. High-resolution transmission electron microscopy revealed grains with an average size of 10 nm. The structure was predominantly hexagonal with a high density of stacking faults. The film crystallinity improved with annealing in air. Annealing in a CdCl₂ flux increased the grain size considerably and reduced the density of stacking faults. The optical transmission of the as-deposited films indicated a band gap energy of 2.41 eV. Annealing in air reduced the band gap by 0.1 eV. Annealing in CdCl₂ led to a sharper optical absorption edge that remained at 2.41 eV. Similar band gap values were obtained by photocurrent spectroscopy and electroabsorption spectroscopy (EEA) using an electrolyte contact. EEA spectra were broad for the as-deposited and air-annealed samples, but narrower for the CdCl₂-annealed films, reflecting the reduction in stacking fault density. Donor densities of ca. 10¹⁷ cm ^–3 were derived from the film/electrolyte junction capacitance.     

Advanced thin-film silicon-on-sapphire technology: microwavecircuit applications

This paper reviews the prospects of thin-film silicon-on-sapphire (TFSOS) CMOS technology in microwave applications in the 1-5 GHz regime and beyond and presents the first demonstration of microwave integrated circuits based on this technology, MOSFET's optimized for microwave use, with 0.5-μm optically defined gate lengths and a T-gate structure, have f_t values of 25 GHz (14 GHz) and f_max values of 66 GHz (41 GHz) for n-channel (p-channel) devices and have noise figure values below 1 db at 2 GHz, some of the best reported performance characteristics of any silicon-based MOSFET's to date. On-chip spiral inductors exhibit quality factors above ten. Circuit performance compares favorably with that of other CMOS-based technologies and approach performance levels similar to those obtained by silicon bipolar technologies. The results demonstrate the significant potential of this technology for microwave applications     

Comparison of the genomic short regions of a vaccine strain (SA-2) and a virulent strain (CSW-1) of infectious laryngotracheitis virus (Gallid herpesvirus 1)

Restriction enzyme linkage maps were produced for the genomic short region of the virulent infectious laryngotracheitis virus (CSW-1 strain). After comparison with the equivalent restriction enzyme linkage maps for the infectious laryngotracheitis virus SA-2 strain (a vaccine strain), it was determined that the maps for the short regions of the two strains were identical, apart from a single section in each of the inverted terminal repeats. Each inverted terminal repeat of the SA-2 strain was discovered to contain 467 base pairs more DNA than the CSW-1 strain's inverted terminal repeats. This extra DNA was more precisely mapped entirely within the EcoRI fragments D and d of SA-2, which were found to form part of the SmaI fragments U and P of SA-2 and Q and b of SA-2 and to contain one SmaI restriction enzyme site.     

Pigmentation phenotypes of variant extension locus alleles result from point mutations that alter MSH receptor function

Coat colors in the chestnut horse, the yellow Labrador retriever, the red fox, and one type of yellow mouse are due to recessive alleles at the extension locus. Similarly, dominant alleles at this locus are often responsible for dark coat colors in mammals, such as the melanic form of the leopard, Panthera pardus. We show here that the murine extension locus encodes the melanocyte-stimulating hormone (MSH) receptor. In mice, the recessive yellow allele (e) results from a frameshift that produces a prematurely terminated, nonfunctioning receptor. The sombre (Eso and Eso-3J) and tobacco darkening (Etob) alleles, which both have dominant melanizing effects, results from point mutations that produce hyperactive MSH receptors. The Eso-3J receptor is constitutively activated, while the Etob receptor remains hormone responsive and produces a greater activation of its effector, adenylyl cyclase, than does the wild-type allele.