Biological treatment of wastewater from a polymer coating process

Wastewater containing propylene glycol methyl ether from a powder and E‐coating plant was treated biologically. The wastewater was circulated through a packed column at rates of 0.014, 0.028, and 0.042 m³ m^?2 s^?1 (14, 28, and 42 kg m^?2 s^?1) with an airflow in a countercurrent direction. Various air flowrates from 0.034 to 0.10 m³ m^?2 s^?1 (0.041–0.12 kg m^?2 s^?1) were used. The removal of the biological oxygen demand (BOD) of the wastewater did not change significantly with the air flowrate. After 4 days of treatment in the packed column the BOD was reduced by about 70% while a BOD reduction of 10% was observed with the wastewater in a stagnant tank. BOD removal with aeration in the packed column was about 40% higher than that without aeration. At the air flowrate of 0.068 m³ m^?2 s^?1 and the liquid flowrate of 0.028 m³ m^?2 s^?1, BOD removal for the wastewater seeded with Polyseed® increased by about 25% compared with that of the unseeded wastewater. In order to minimize the power consumption, cyclic pumping of the liquid to the packed column with aeration was also tested. For the liquid‐pumping cycle of 2‐h on and 4‐h off, BOD removal was about the same as that with a continuously pumping operation. © 2002 Society of Chemical Industry     

Advanced Surface of Fibrous Activated Carbon Immobilized with FeO/TiO2 for Photocatalytic Evolution of Hydrogen under Visible Light

FeO-doped TiO₂ nanoparticle photocatalysts were immobilized onto the surface of fibrous activated carbon (ACF) via a sol-gel process. As an adsorbent and photocatalyst, FeO-TiO₂ on immobilized ACFs (FeO-TiO₂/ACF) greatly improved the photocatalysis rate of hydrogen production as compared with pure TiO₂ and ACF-TiO₂ under UV irradiation and visible light. The addition of ACFs surface significantly reduced the photogenerated pairs of electrons-hole recombination, thereby promoting the photocatalysis action of doped photo-metal oxides of FeO-TiO₂. Co-doping of FeO onto the lattice of the TiO₂ approach can improve the absorption activity of visible light through photo-metal oxide of TiO₂ and further enhance hydrogen production under visible light. The photocatalytic fabrics (FeO-TiO₂/ACF) were effortlessly split out from the experimental solution for re-utilization and exhibited high stability even after five complete regeneration cycles.     

Dry Fractionation Approach in Concentrating Tocopherols and Tocotrienols from Palm Fatty Acid Distillate: A Green Pretreatment Process for Vitamin E Extraction

Palm fatty acid distillate (PFAD) is a rich source of vitamin E. As compared to other vegetable oil, PFAD has higher tocotrienol (70–80%) over tocopherol content, which makes it a valuable source for vitamin E extraction. Current vitamin E extraction methods are not sustainable due to the intensive usage of chemical and high operational cost. Hence, the present study investigated for the first time using dry fractionation process as a green and economical pretreatment method for separating solid fraction (stearin) and liquid fraction (olein) in order to concentrate vitamin E from PFAD in olein fraction. We examined the dry fractionation conditions: crystallization ending temperature (36–44 °C), cooling rate (0.3 and 1.5°C min⁻¹), stirring speed (20–125 rpm), and holding time (0–60 min) on the composition of unsaturated and saturated fatty acids as well as vitamin E content in liquid fraction (olein) and solid fraction (stearin) using gas chromatography and high performance liquid chromatography, respectively. In most of these conditions, vitamin E was ultimately higher in olein fraction as compared to stearin fraction, which is correlated with the high degree of unsaturation. Under a cooling rate of 0.3°C min⁻¹, 90 rpm stirring speed, and ending crystallization of 38 °C, the highest vitamin E rich olein fraction was attained with 1479 ± 10.51 ppm in 50 g olein fraction as compared to 1366 ± 7.94 ppm in 500 g of unfractionated PFAD.     

Simulated Microgravity Inhibits the Proliferation of Chang Liver Cells by Attenuation of the Major Cell Cycle Regulators and Cytoskeletal Proteins

Simulated microgravity (SMG) induced the changes in cell proliferation and cytoskeleton organization, which plays an important factor in various cellular processes. The inhibition in cell cycle progression has been considered to be one of the main causes of proliferation inhibition in cells under SMG, but their mechanisms are still not fully understood. This study aimed to evaluate the effects of SMG on the proliferative ability and cytoskeleton changes of Chang Liver Cells (CCL-13). CCL-13 cells were induced SMG by 3D clinostat for 72 h, while the control group were treated in normal gravity at the same time. The results showed that SMG reduced CCL-13 cell proliferation by an increase in the number of CCL-13 cells in G0/G1 phase. This cell cycle phase arrest of CCL-13 cells was due to a downregulation of cell cycle-related proteins, such as cyclin A1 and A2, cyclin D1, and cyclin-dependent kinase 6 (Cdk6). SMG-exposed CCL-13 cells also exhibited a downregulation of α-tubulin 3 and β-actin which induced the cytoskeleton reorganization. These results suggested that the inhibited proliferation of SMG-exposed CCL-13 cells could be associate with the attenuation of major cell cycle regulators and main cytoskeletal proteins.     

Hydrophilicity Enhancement of High‐Density Polyethylene Film by Ozonation

High‐density polyethylene (HDPE) films were ozonated in the gas phase and in distilled water, respectively, to improve their surface hydrophilicity. The efficiency of ozonation conducted in the gaseous and aqueous phases was compared. The results indicated that the aqueous ozonation was more effective than its gaseous counterpart in terms of peroxide generation. The results also showed that the concentration of peroxides generated on the film surfaces increased with the applied ozone dose and ozonation time in both phases. It was found that the peroxides generated by aqueous ozonation were accessible to monomers for graft polymerization. The hydrophilicity of the HDPE films was significantly improved by graft polymerization of acrylamide (AAm) initiated by the peroxides. The contact angle reduction from 74.9° to 38.6° indicated the successful graft polymerization. The successful graft polymerization of AAm was further confirmed by the formation of new peaks corresponding to amide groups in FTIR spectra and by scanning electron microscope images.     

Angiotensin II signal transduction pathways

It has been 100 years since the discovery of renin by Tigerstedt and Bergman. Since that time, numerous discoveries have advanced our understanding of the renin-angiotensin system, including the observation that angiotensin II is the effector molecule of this system. A remarkable aspect of angiotensin II is the many different physiological responses this simple peptide induces in different cell types. Here, we focus on the signal transduction pathways that are activated as a consequence of angiotensin II binding to the AT1 receptor. Classical signaling pathways such as the activation of heterotrimeric G proteins by the AT1 receptor are discussed. In addition, recent work examining the role of tyrosine phosphorylation in angiotensin II-mediated signal transduction is also examined. Understanding how these distinct signaling pathways transduce signals from the cell surface will advance our understanding of how such a simple molecule elicits such a wide variety of specific cellular responses.     

Comparison of methods for selecting personal protective equipment for arc flash hazards

In 1960, a large global chemical company began documenting and implementing requirements for preventing injuries from electric arc flash hazards, including appropriate personal protective equipment (PPE). Methods evolved from requiring a 100% natural fiber long-sleeve shirt for a specific task to a detailed analysis with multiple flame-resistant clothing options. This paper compares the PPE required by these methods, based on hazards analysis in more than 65 manufacturing and laboratory facilities. The total costs for the example company are estimated for each method.