A New Method for Comparing Orthonasal and Retronasal Olfaction.

Odors seem to be perceived differently when presented ortho- or retronasally. In this study, stimuli of controlled concentration and duration were applied in either the anterior nasal cavity or epipharynx by means of air-dilution olfactometry. Stimulus concentration was monitored in the olfactory cleft. In Experiment 1, odor thresholds to a food (chocolate) and a nonfood (lavender) odor were lower for orthonasal, compared with retronasal, stimulation. In Experiment 2, intensity ratings to suprathreshold odor concentrations were significantly higher for orthonasal than for retronasal stimulation with hydro- hydrogen sulfide, but not phenyl ethyl alcohol. Accordingly, amplitudes and latencies of olfactory event-related gen potentials to retronasal stimuli were found to be smaller and prolonged, respectively. This indicates differential processing of olfactory stimuli presented through the retronasal or orthonasal routes. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Modeling transient slag-layer phenomena in the shell/mold gap in continuous casting of steel

Mold-slag friction and fracture may cause heat-transfer variations in continuous casting, which leads to steel shell temperature and stress variations, resulting in surface cracks. Analytical transient models of liquid slag flow and solid slag stress have been coupled with a finite-difference model of heat transfer in the mold, gap, and steel shell to predict transient shear stress, friction, slip, and fracture of the slag layers. The models are validated by comparing with numerical models and plant measurements of mold friction. Using reported slag-fracture strength and time-temperature-transformation (TTT) diagrams, the models are applied to study the effect of casting speed and mold-powder viscosity properties on slag-layer behavior between the oscillating mold wall and the solidifying steel shell. The study finds that liquid-slag lubrication would produce negligible stresses. A lower mold-slag consumption rate leads to high solid friction and results in solid-slag-layer fracture and movement below a critical value. Crystalline slag tends to fracture near the meniscus and glassy slag tends to fracture near the mold exit. A medium casting speed may be the safest to avoid slag fracture, due to its having the lowest critical lubrication consumption rate. The high measured friction force in operating casters could be due to three sources: an intermittent moving solid slag layer, excessive mold taper, or mold misalignment. Other symbols are defined in Table I     

Infra-red and Raman spectroscopic study on the thermal stability and high temperature transformation of hydroazafullerene C59HN

Hydroazafullerene C₅₉HN was studied by vibrational infra-red and Raman spectroscopy and its thermal stability was examined. Fingerprints modes were identified and unambiguously differentiate it from bisazafullerene. At 700 K full transformation to bisazafullerene occurred, while an intermediate metastable phase was identified at 540 K showing different spectra where the splitting of most of the lines is strongly reduced.     

Refactoring and converting a TTCN-2 test suite

When deploying TTCN-3 at Nokia, we converted two TTCN-2 test systems to TTCN-3. We explain to which extend we have been able to do the conversion automatically. The conversion tool used provided a syntactically and semantically correct conversion of the TTCN-2 code. We define some improvements made on the tool to increase readability and maintainability of the resulting code. We cover aspects of converting also the non-TTCN-2 parts and describe the experiences we made as a set of lessons learnt.     

Credibility and applicability of virtual reality models in design and construction

In this paper, we present the findings from an extensive study of the use of virtual reality (VR) models in large construction projects. The study includes two parts: The first part presents a quantitative questionnaire designed to investigate how VR models are experienced and assessed by the workforce at a building site. The second part includes a qualitative field survey of how VR models can be applied and accepted by professionals in the design and planning process of a large pelletizing plant. Through mainly studying persons who had little or no experience with advanced information technology (IT), we hoped to reveal the attitudes of the average person working at a construction site rather than of an IT expert. In summary, the study shows that the VR models in both projects have been very useful and well accepted by the users. Today’s information flow is, from a general point of view, considered to be insufficient and the hypothesis is that using VR models in the construction process have the potential to minimize waste of resources and improve the final result.     

液晶分子附着能和盒间隙对响应时间的影响

通过理论分析和实验研究液晶分子附着能和液晶盒间隙对响应时间(τ0)的影响。用液晶盒有效间隙法和表面动力学方程法两种方法推出分析公式,由这两种方法推出的结果是一致的。实验数据与简化方程τ0-dx基本拟合(其中d是液晶盒的间隙,x是指数)。在两种极端的(极大或极小)附着能极限下,指数x分别接近2和1。这个结论有助于优化液晶显示器件的应用。     

Kinetics study of Ti[O(CH2)4OCHCH2]4 initiated ring‐opening polymerization of ε‐caprolactone by differential scanning calorimetry

Chemical shrinkage was used for the in situ measurement of the progressing chemical stabilization reactions and the influence of ozone during the stabilization of polyacrylonitrile. A method for evaluating the activation energy through the sensitivity temperature is presented. The calculated results show that the activation energies were 161.57 kJ/mol in air and 181.23 kJ/mol in ozone-enriched air. Therefore, the chemical reactions were postponed during stabilization in ozone-enriched air. Ozone seemed to act in three ways: first, ozone promoted the formation of the serious skin–core structure. Second, ozone accelerated the chemical reactions and shortened the stabilization time at lower heating rates. Third, ozone postponed the chemical reactions. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Non-invasive headspace measurement for characterizing oxygen-scavenging in polymers

A non-invasive headspace analysis method to measure rate and amount of oxygen uptake in oxygen-scavenging polymers is presented. Oxygen uptake data for metal-catalyzed poly(1,4-butadiene) at 30 °C are provided to illustrate the method. These data were obtained by measuring oxygen headspace concentration above the scavenging polymer with an OxySense^® 200T non-invasive oxygen sensor, and, for comparison, oxygen uptake was measured with an analytical balance. Excellent agreement was observed between these two independent experiments.     

Estrogen effects on the hyperactivity induced by (+)-MDMA and cocaine in female rats.

This study compared the effects of estrogen (E) on the hyperactivity induced by (+)-3,4-methylenedioxymethamphetamine (MDMA) with E effects on cocaine-evoked hyperactivity in female rats. Sprague-Dawley rats were ovariectomized (OVX); half of them received a 17β-estradiol (E?) implant (OVX + E). Three weeks later, rats received saline, (+)-MDMA (1, 2, or 4 mg/kg) or cocaine (5, 10, or 20 mg/kg), and locomotor activity was monitored. OVX + E rats exhibited greater locomotor hyperactivity in response to both psychostimulants than did OVX rats. The enhanced response to cocaine appeared within 5 min following drug injection whereas the enhanced response to (+)-MDMA was delayed for approximately 30 min. The differential effects of E on hyperactivity may be due to the unique profiles of dopamine (DA) and serotonin (5-HT) in response to (+)-MDMA and cocaine. (PsycINFO Database Record (c) 2010 APA, all rights reserved)