Biochemical identification of transmembrane segments of the Ca(2+)-ATPase of sarcoplasmic reticulum

The transmembrane segments of sarcoplasmic reticulum Ca(2+)-ATPase were determined by trypsinization of cytoplasmic side-out intact sarcoplasmic reticulum vesicles. The membrane portion of tryptic digest comprising the transmembrane fragments, joined by the intravesicular segments, was separated by sodium dodecyl sulfate-polyacrylamide gel electrophoresis after labeling with fluorescein 5-maleimide in the presence of sodium dodecyl sulfate. In this way, seven fluorescent bands of tryptic fragments below 11 kDa were observed which were derived from 4 pairs of membrane spanning segments and one hydrophobic sequence at the C-terminal end. Two peptides of 10.8 and 10.6 kDa had the identical N-terminal sequence beginning at Glu826, representing the transmembrane segments M7 and M8 and their connecting loop. A band at 8.1 kDa contained one peptide beginning at Tyr36 (M1/loop/M2). A 7.7-kDa peptide starting at Leu253 (M3/loop/M4) and a 7.3-kDa peptide beginning at Ala752 (M5/loop/M6) were also observed. A band at 6.7 kDa contained two peptides, one beginning at Ser48 (M1/loop/M2) and another beginning at Tyr763 (M5/loop/M6). In addition, a 4-kDa peptide beginning at Met925 was observed. The size of this peptide did not allow for a complete pair of transmembrane segments, but this peptide could have been derived from trypsinolysis between the last pair of membrane spanning segments. These data therefore provide biochemical evidence for at least 8 transmembrane segments and perhaps two more at the C-terminal end of the enzyme.     

Expression of laminin and nidogen genes during the postimplantation development of the mouse placenta

The expression patterns of laminin A, B1, B2, and nidogen genes were identified by in situ hybridization in postimplantation mouse extraembryonic tissues and maternal decidua during the period when the chorioallantoic placenta is established. Laminin and nidogen genes were not coordinately expressed either in the decidua or in trophoblast cells, indicating that these genes are regulated independently in these cell types during the establishment of the placenta. Laminin A mRNA was absent from the decidua except in the outer layer of cells adjacent to the myometrium and in the central decidual zone adjacent to the remnant of the uterine epithelium on Day 9. At this stage laminin B1, B2, and nidogen genes were strongly expressed in these cells and also in other regions of the decidua. Laminin B1 mRNA was present at higher levels in the decidua capsularis than in the decidua basalis, while nidogen mRNA showed highest expression in the decidua basalis. Laminin B2 mRNA was produced uniformly throughout the decidua at very high levels, suggesting that laminin B2 chains may be an important component of the decidual matrix. By Day 11, the nidogen gene was expressed only in endothelial cells lining the maternal blood spaces within the decidua. Laminin B1 and nidogen mRNAs were found at high levels within trophoblast giant cells at all stages, while laminin A mRNA was detected in trophoblast giant cells at later stages and laminin B2 mRNA was not produced in high levels by these cells. The patterns of gene expression show a very high degree of regional specialization, suggesting that the extracellular matrices in different regions of the decidua and extraembryonic membranes are likely to be composed of quite different ratios of laminin and nidogen polypeptides.(ABSTRACT TRUNCATED AT 250 WORDS)     

Mixed Mode VLSI Implementation of a Neural Associative Memory

A mixed mode digital/analog special purpose VLSI hardware implementation of an associative memory with neural architecture is presented. The memory concept is based on a matrix architecture with binary storage elements holding the connection weights. To enhance the processing speed analog circuit techniques are applied to implement the algorithm for the association. To keep the memory density as high as possible two design strategies are considered. First, the number of transistors per storage element is kept to a minimum. In this paper a circuit technique that uses a single 6-transistor cell for weight storage and analog signal processing is proposed. Second, the device precision has been chosen to a moderate level to save area as much as possible. Since device mismatch limits the performance of analog circuits, the impact of device precision on the circuit performance is explicitly discussed. It is shown that the device precision limits the number of rows activated in parallel. Since the input vector as well as the output vector are considered to be sparsely coded it is concluded, that even for large matrices the proposed circuit technique is appropriate and ultra large scale integration with a large number of connection weights is feasible.     

Measurements of single chain form factors by small-angle neutron scattering from polystyrene blends containing high concentrations of labelled molecules

A series of small angle neutron scattering measurements on blends of normal polystyrene (PSH) and labelled (deuterated) polystyrene (PSD) have been made with concentrations of PSD from 5 to 50 mol %. It is shown that the single chain form factor of the polymer in bulk can be obtained from a single concentration measurement for any concentration of labelled molecules, providing the molecular weights of the parent and labelled molecules are the same and the molecular weight distributions are narrow.     

A comparison between the enhanced mass transfer in boundary and pressure driven oscillatory flow

Mass transport in pulsating flow devices using either moving boundaries or oscillating imposed pressure drops are compared with each other by means of a calculation using a simple model. We conclude that there is no difference between the two configurations as long as one is interested only in the power required to move the fluid for the convective mass transport achieved. However, the boundary driven configuration is more efficient if the power is divided by the total mass transport where both the diffusive and convective parts are taken into account, the boundary driven configuration is more efficient. The amplitude of the piston stroke in the pressure driven configuration and the amplitude in the boundary driven case are assumed to be the same, and the inertia of the moving devices themselves are ignored in this calculation.     

Simulation of the submerged energy nozzle-mold water model system using laser-optical and computational fluid dynamics methods

The present work describes quantitative digital particle image velocimetry measurements of a full-scale water model of a thin slab mold. Different casting speeds and two submerged entry nozzles with one and two outlet ports have been investigated. The flow pattern of the single-port nozzle shows a counterclockwise-rotating double vortex that is nearly steady-state but leads to high stationary surface waves. The flow jets out of the two-port nozzle oscillate and produce a transient flow pattern with low wave amplitudes. The amplitudes for the one-port nozzle show a linear variation with the volumetric flow rate. The experimental results lead to a good interpretation of the flow phenomena and are used to validate steady-state numerical simulations with the commercial program, CFX, on the basis of the Reynolds equations. To describe anisotropic turbulence effects, the Reynolds stress model (RSM) is used for the flat single-port nozzle and the standard k-ɛ model for the mold flow. The calculated mean velocities and wave amplitudes, predicted from pressure distribution at the water surface, are generally in the consensus of the experimental data. An erratum to this article is available at .     

Cognitive-behavioral therapy and relationship therapy in the treatment of children referred for antisocial behavior.

112 children (aged 7-13 yrs) were randomly assigned to one of three treatments: problem-solving skills training (PSST), problem-solving skills training with in vivo practice (PSST-P), which included therapeutically planned activities to extend training to settings outside of treatment, or client-centered relationship therapy (RT). PSST and PSST-P children showed significantly greater reductions in antisocial behavior and overall behavior problems, and greater increases in prosocial behavior than RT children. These effects were evident on measures obtained immediately after treatment and at a 1-year follow-up, and on measures of child performance at home and at school. PSST-P children showed greater changes than PSST children on measures of functioning at school at posttreatment, but these differences were no longer evident at follow-up. Children in both PSST conditions showed significant reductions in deviant behavior and improvements in prosocial behavior from pretreatment to follow-up, whereas RT children tended to remain at their pretreatment level of functioning. (PsycINFO Database Record (c) 2010 APA, all rights reserved)