A comparison of the performance of lightweight glass containers manufactured by the P&B and B&B processes

The mechanical performance of lightweight glass packages produced by the NNPB (narrow neck press and blow) process was evaluated by comparison with the same glass packages (regular weight) produced by the conventional process (blow and blow). The temper number (annealing process evaluation), thickness distribution behaviour and mechanical performance (impact, vertical load and thermal shock strength) were analysed before and after line simulation, applied in optimized conditions in the laboratory. The performance of lightweight glass packages under transport simulation (truck envelope) in relation to the regular weight bottles was also evaluated. Both bottles presented residual stress values within the specified limits. The lightweight glass bottles had a more homogenous thickness distribution in comparison with the regular weight bottles and a better performance (about 33% improvement) in relation to the impact strength, especially in the heel, even when evaluated after line simulation. As to the vertical load strength, the lightweight glass bottle also indicated a superior performance to the regular weight bottle, both before and after line simulation. Both bottles withstood the temperature difference of 42°C that such packages are supposed to resist according to thermal shock specification. Due to the better thickness distribution of lightweight glass packages, they withstood a maximum temperature difference (progressive thermal shock) of 5–10°C higher than the regular weight bottles. No restrictions of the lightweight glass packages submitted to the transport simulation were found. Copyright © 2002 John Wiley & Sons, Ltd.     

Robust Approximation of Offsets,Bisectors, and Medial Axes of Plane Curves

Most methods for computing offsets, bisectors, and medial axes of parametric curves in the plane are based on a local formulation of the distance to a curve. As a consequence, the computed objects may contain spurious parts and components, and have to be trimmed. We approach these problems as global optimization problems, and solve them using interval arithmetic, thus generating robust approximations that need not be trimmed.     

Selective Sharing of Load Current Components Among Parallel Power Electronic Interfaces in Three-phase Four-wire Stand-alone Microgrid

This paper investigates selective sharing of load current components among the parallel operation of distributed generators (DGs) in three-phase four-wire stand-alone microgrids. The proposed control method is based on master-slave operation of DGs, and the goal of selective sharing of load current components is to have DGs located in close proximity of the load operating in slave mode, in order to inject their available energy and also compensate the non-active load current components, while the distant DGs might operate in master mode to share the remaining load autonomously. Droop control is employed due to impracticality of communication at remote nodes, and resistive line impedance compensation is adopted to decouple active and reactive power controllers and ensure proper active power sharing among master DGs, irrespective of the mitigation of non-active current components by the slave inverters. The sharing factors for each current component are determined by a higher level control. The Conservative Power Theory (CPT) decompositions provide decoupled power and current references for the inverters, resulting in a selective sharing strategy. The principles supporting the developed control strategy are discussed, and the effectiveness of the control is demonstrated through computational simulations using PSIM software.     

Synthesis and characterization of iron oxide nanoparticles dispersed in mesoporous aluminum oxide or silicon oxide

Iron oxide nanoparticles dispersed in aluminum (Al) or silicon (Si) oxides were prepared via a polymeric precursor derived from the Pechini method. The samples were characterized by thermogravimetric analysis, Fourier-transform infrared spectroscopy, X-ray diffraction, N₂ adsorption/desorption isotherms (Brunauer–Emmett–Teller, BET), M?ssbauer spectroscopy, and vibrating sample magnetometry (VSM). BET analysis shows that the samples are mesoporous materials and have a high surface area. The size of the Fe₂O₃ nanoparticles in Al₂O₃ is smaller than that in SiO₂. M?ssbauer spectra of the samples show that the Fe₂O₃ nanoparticles in Al₂O₃ are non-magnetic at room temperature but magnetic below 50 K. The FeSi samples are magnetic at both room and low temperatures. The magnetic measurements with VSM confirmed this point.     

Refined Mindlin-Reissner theory of forced vibrations of shear deformable plates

Two theories of shear deformable plate vibrations that account for the influence of the transverse normal stress component are derived. The first is a slightly modified Mindlin theory, including a shear correction factor, while in the second the use of the shear correction factor is replaced by stress components that exactly satisfy elasticity motion equations and plate face boundary conditions. A comparison with the exact 3D solution for a sinusoidally loaded rectangular plate and infinite strip is made. It is found that the refined theories significantly increase the accuracy of results compared to the original Mindlin theory.     

Component-Based Applications: A Dynamic Reconfiguration Approach with Fault Tolerance Support

This paper presents a mechanism for dynamic reconfiguration of component-based applications and its fault tolerance strategy. The mechanism, named generic connector, allows composing a component-based application as a set of services with no previous knowledge about the specific components that will provide some services. The components will be selected at runtime. The objective of this work is to offer a mechanism that tries to satisfy every invocation under its responsibility and makes failures as transparent as possible. It is an important tool to compose applications through the reuse of existing components because it frees the programmer from the task of searching components in order to use them and, also, from solving some types of failures.     

A quasi-resonant quadratic boost converter using a single resonant network

This paper presents a quadratic boost converter using a single quasi-resonant network to reach soft commutation. A resonant inductor, a resonant capacitor, and an auxiliary switch form the resonant network and the main switch operates in a zero-current-switching way. A complete analysis of this converter is presented. According to the simulation and experimental results, this quadratic boost converter provides a larger conversion ratio than that provided by the conventional boost converter (for a given duty ratio D), and presents optimum performance, which operates with soft-switch commutation using a single resonant network.     

Constructing nurse schedules at large hospitals

Several heuristics, based on evolutive algorithms and local search, are used to solve the nurse scheduling problem at a large hospital. Due to several intricate and specific restrictions imposed on the schedules, the problem is a difficult one to solve by hand. Moreover, some of the restrictions have a subjective value attached to them, and this constrains the use of exact methods that search for global optima. In order to facilitate the use of the solver modules by the hospital staff, a user interface was also implemented.