Hydrogen plasma treatment of very thin p-type nanocrystalline Si films grown by RF-PECVD in the presence of B(CH3)3

We have characterized the structure and electrical properties of p-type nanocrystalline silicon films prepared by radio-frequency plasma-enhanced chemical vapor deposition and explored optimization methods of such layers for potential applications in thin-film solar cells. Particular attention was paid to the characterization of very thin (∼20 nm) films. The cross-sectional morphology of the layers was studied by fitting the ellipsometry spectra using a multilayer model. The results suggest that the crystallization process in a high-pressure growth regime is mostly realized through a subsurface mechanism in the absence of the incubation layer at the substrate-film interface. Hydrogen plasma treatment of a 22-nm-thick film improved its electrical properties (conductivity increased more than ten times) owing to hydrogen insertion and Si structure rearrangements throughout the entire thickness of the film.     

A multi-objective approach for multi-material topology and shape optimization

An automated multi-material approach that integrates multi-objective Topology Optimization (TO) and multi-objective shape optimization is presented. A new ant colony optimization algorithm is presented and applied to solving the TO problem, estimating a trade-off set of initial topologies or distributions of material. The solutions found usually present irregular boundaries, which are not desirable in applications. Thus, shape parameterization of the internal boundaries of the design region, and subsequent shape optimization, is performed to improve the quality of the estimated Pareto-optimal solutions. The selection of solutions for shape optimization is done by using the PROMETHEE II decision-making method. The parameterization process involves identifying the boundaries of different materials and describing these boundaries by non-uniform rational B-spline curves. The proposed approach is applied to the optimization of a C-core magnetic actuator, with two objectives: the maximization of the attractive force on the armature and the minimization of the volume of permanent magnet material.     

Hawaiian and Azorean volcanic aggregates: a preliminary study of the potential alkali-silica reaction

Bulletin of Engineering Geology and the Environment - The alkali-silica reaction (ASR) is a chemical deterioration of concrete that involves reactive forms of silica. Volcanic glass is one of the...     

Ionomer composites based on sepiolite/hydrogenated poly(styrene butadiene) block copolymer systems

Ionomeric composites based on sepiolite and hydrogenated poly(styrene butadiene) block copolymer were obtained and characterized from a microstructural and electrical point of view. Before blending, because of the high silanol group concentration in the sepiolite, the latter could be organophilized with suitable coupling agents. The resulting materials were easily processed into thin films or membranes 0.2–0.4 mm thick, their conductivity in some cases approaching 10^?1 S/cm. Their suitability for film formation and good electrical properties indicate potential applications as electrolytes in polymer fuel cells. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3512–3519, 2002     

SUPERCRITICAL EXTRACTION OF LINSEED OIL: ECONOMICAL VIABILITY AND MODELING EXTRACTION CURVES

The aim of the present study was to use supercritical technology to recover linseed oil (Linum usitatissimum L.) using carbon dioxide (alone or modified with ethanol as solvent) to determine the influence of the technique on the chemical composition of the oil obtained, model the kinetic curves of extraction, and estimate the manufacturing cost of the process. The experiments were conducted at 323 K, pressure of 25 MPa, constant solvent flow of 1.7 × 10^?5 kg/s, and extraction time of 5 h. The highest yield was obtained with the addition of cosolvent (28.8%). The SFE process of linseed oil manufacture proved to be economically viable, resulting in a product with a specific cost of 13.21 US$/kg_oil. As to oil composition, the main fatty acids detected were linolenic and oleic acid.     

Effect of Solvent Content on the Separation and the Energy Consumption of Extractive Distillation Columns

This article sets out to evaluate the effect of solvent content in the extractive section on the separation efficiency and energy consumption of extractive distillation columns. Contrary to the classical approach, the proposed approach enables a simultaneous evaluation of the effect of the major decision variables (reflux ratio, solvent flow rate, and the number of stages of the extractive section [NSE]). The procedure allows calculating the minimum solvent flow rate for the separation and the minimum specific energy consumption. The results show that the minimum specific energy consumption is obtained for the minimum reflux ratio and not for the minimum solvent flow rate. Moreover, the results show that it is not always the case that a larger NSE results in lower energy consumption. Due to its industrial importance, the dehydration of aqueous mixtures of ethanol using ethylene glycol as solvent has been chosen as a case study.     

Effect of Amphipathic HIV Fusion Inhibitor Peptides on POPC and POPC/Cholesterol Membrane Properties: A Molecular Simulation Study

T-20 and T-1249 fusion inhibitor peptides were shown to interact with 1-palmitoyl-2-oleyl-phosphatidylcholine (POPC) (liquid disordered, ld) and POPC/cholesterol (1:1) (POPC/Chol) (liquid ordered, lo) bilayers, and they do so to different extents. Although they both possess a tryptophan-rich domain (TRD), T-20 lacks a pocket binding domain (PBD), which is present in T-1249. It has been postulated that the PBD domain enhances FI interaction with HIV gp41 protein and with model membranes. Interaction of these fusion inhibitor peptides with both the cell membrane and the viral envelope membrane is important for function, i.e., inhibition of the fusion process. We address this problem with a molecular dynamics approach focusing on lipid properties, trying to ascertain the consequences and the differences in the interaction of T-20 and T-1249 with ld and lo model membranes. T-20 and T-1249 interactions with model membranes are shown to have measurable and different effects on bilayer structural and dynamical parameters. T-1249’s adsorption to the membrane surface has generally a stronger influence in the measured parameters. The presence of both binding domains in T-1249 appears to be paramount to its stronger interaction, and is shown to have a definite importance in membrane properties upon peptide adsorption.     

Sintering of porous alumina obtained by biotemplate fibers for low thermal conductivity applications

In this research report, a sintering process of porous ceramic materials based on Al₂O₃ was employed using a method where a cation precursor solution is embedded in an organic fibrous cotton matrix. For porous green bodies, the precursor solution and cotton were annealed at temperatures in the range of 100–1600 °C using scanning electron microscopy (SEM) and thermogravimetric (TG) analysis to obtain a porous body formation and disposal process containing organic fibers and precursor solution. In a structure consisting of open pores and interconnected nanometric grains, despite the low porosity of around 40% (calculated geometrically), nitrogen physisorption determined a specific surface area of 14 m²/g, which shows much sintering of porous bodies. Energy dispersive X-ray (EDX) and X-ray diffraction (XRD) analytical methods revealed a predominant amount of α-Al₂O₃ in the sintered samples. Thermal properties of the sintered Al₂O₃ fibers were obtained by using the Laser Flash which resulted in the lower thermal conductivity obtained by α-Al₂O₃ and therefore improved its potential use as an insulating material.